Computer Monitors Dealers in Andheri East, Mumbai

• Brand Name: Contec
• Weight: 500 Gm
• Accuracy: 0.01 (pressure)
• Usage/Application: Hospital
• Display Type: LCD
• Power Source: Battery

• Application: Clinic, Hospital
• Power Source: Electric
• Accuracy: ±3bpm
• Gain: 10mm/mV, 20mm/mV
• parameters: ECG, EtCO2 Micro Stream, IBP, Mainstream Etco2, NIBP, Pulse Rate, Respiration
• Temperature: 0-50 °C
• Display: Digital

• Country of Origin: France
• Type: Gas Monitor
• Application: Industrial Use
• Color: Black
• Voltage: 220V
• Condition: New
• Connectivity: Wired, Wireless
• Make: Oldham
• Model: BM25
• HC: 0-100% LEL
• O2: 0-25% Vol.
• CO: 0-2000ppm
• H2S: 0-100ppm
• Sensors: Catalytic, Infrared, Electrochemical, PID
• Battery: Upto 6 days continious running

• Generic: Blood Pressure Monitor
• Product Category: Homecare Range

We are working with a group of professionals who make special emphasis on the products packaging and ensure that the material is procured from the reliable sources only. We are a noteworthy name and work hard to attain complete client satisfaction. And, for achieving this objective, we facilitate them with easy payment modes. BPX is a fully automatic blood pressure monitor with following special features : LCD Display for clear visualization Recall values from Memory recall button,Memory capacity of 90. Systolic/Diastolic & Pulse rate. Automatic inflation and deflation of cuff. Auto shut off after one minute of last key operation. Specially designed device and cuff to prevent electrical shocks.

We Offer Battery Charge Monitor BCM-01 is a micro controller based unit, which is used for monitoring the charge level of stationary battery systems. This unit measures the voltage drop across a shunt through which the battery is connected to the charger and the load. The unit displays the charge remaining on the battery in terms of Ampere- Hour (AH) capacity as well as remaining time for which the battery can supply rated current. The unit incorporates precision analog and digital circuits and has the following features Feature Ø A settable low charge alarm Ø Display of the charge on the battery as AH and Remaining time for complete discharge. Ø Field Setting of the Rated battery capacity in AH. Ø Field setting of the shunt rating. Ø Remote Indication of fully charged Battery condition. Ø Soft calibration – no trimpots. Ø Optional- RS 485 Modbus link for PC connectivity. Ø Optional Ethernet connectivity for networking. Ø Operates directly from the battery being monitored. Ø User friendly LCD display messages. Ø Field setting of Battery efficiency.

• Usage: to check and monitor your regular blood pressure
• Product: BP monitor
• MOQ: 10

• Brand & Model: JBL C2PS Compact Powered Monitor
• Transducers: LF: 135 mm (5.25 in) low frequency loudspeaker HF: 19 mm (.75 in) Polycarbonate dome tweeter
• Frequency Range: 80 Hz - 20 kHz
• Amplifier Power: 35 Watts per channel
• Maximum SPL Per Pair: 115 dB
• Crossover Frequency: 4.2 kHz
• Input Sensitivity: #ERROR!
• Signal Input Connectors (x2): Balanced Neutrik®* Combo XLR 1/4" TRS; Unbalanced RCA
• Power Requirements: 19 VDC / 3.42 A - use only supplied power supply
• Headphone Jack: 3.5 mm (1/8")
• Dimensions: 235 x 159 x 143 mm (9.3 x 6.3 x 5.6 in)
• Net Weight: 4.8 kg (10 lb)

• Type: Capacitive
• Warranty: 1 Year
• Feature: Touchscreen
• Condition: New
• Screen Resolution (in pixels): 1920*1080
• Brightness: 330 nit
• Screen Size: 32"

We are offering touch screen monitor.

It provides precise result using oscillometric method. The bulit-in microcomputer estimates the external conditions and the pressure to be applied to the cuff to provide the best condition for measuring the blood pressure for precise output. Ideal for medical camps and mass measuring needs. Voice guidance with printout of results an added advantage.

Engineered to provide cost-efficient gas detection, the Ultima XL/XT Series Gas Monitors are simply an outstanding choice. The units boast a hand-held HART port running over 4-20mA output provides convenient setup, calibration and diagnostics. The interchangeable smart sensors eliminate the need for reconfiguration, while local calibration employs LEDS and push-buttons. Indoors or outdoors, some of these explosion-proof models feature infrared technology that eliminates the need for frequent calibrations. Some units operations are based on dual-wavelength, heated-optics technology, which compensates for temperature, humidity and aging effects. The monitors use only one circuit board for increased reliability, and they're easy to install with two-piece field-wiring connectors.   Indoor/outdoor monitors feature HART, which improves information and provides convenient set-up, calibration and diagnostics Interchangeable smart sensors eliminate need for reconfiguration MSA's patented sensor design allows sensor replacement without declassifying the hazardous area Automatic calibration adjustments and date stamping Stainless steel and polycarbonate models available

The CO2 Measuring Unit CO.20 serves the Inline / Online CO2 measurement in the brewery and beverage industry.The measuring principle is based on the ACM continuous partial pressure method; membrane system. The space after a CO2-permeable silicone membrane, fixed in the front of the measuring chamber, is filled with diffusion CO2 until the chamber pressure reaches the partial pressure of the dissolved CO2 in the liquid. At decreasing or increasing CO2 concentration in the liquid, the measuring chamber pressure corresponds. By using up-to-date microprocessor electronics, the current CO2 value is continuously calculated from the determined pressure and temperature values and shown as the actual value in g/l or Vol. ACM also has a CO2 meter for non-destructive measurement of CO2 content in bottled beverages. APPLICATION Applications include Breweries, Softdrinks The CO.20 is highly accurate, robust and almost maintenance-free. There are no moving parts, and a continuous supply of carrier gas is not necessary. The membrane can easily be exchanged; a change once per year is recommended. ACM CO.20 is fully CIP-able. Longer production stops do not have any impact on the membrane quality. Also there is no need for a gas carrier. A user unit with 5,7″ graphic display is included. Easy handling by self-explanatory symbol keys   SPECIFICATIONS Mounting: Inline Varivent or bypass Power supply: 24 V DC +/- 20%, 800 mA Compressed air supply: 5 to 7 bar, standard compressed air, dry, oil-free; Plug connection, diameter 8 mm Max. nominal pressure: 10 bar Cleaning: Common CIP, up to 130 °C Measuring range: 0 to 10 Vol. resp. 0 to 20 g/l Accuracy: +/- 0,03 Vol. resp. +/- 0,05 g/l Repsonse time t90: < 5 sec Output signal: RS485, (0)4-20 mA, Profibus DP and DeviceNet

We are offering portable gas leak monitor. Human life is constantly threatened in working areas where combustible or toxic gases can accumulate or oxygen becomes depleted enriched. Portable gas leak monitor model : pg-110 provides effective warning to preserve human life and property under these dangerous conditions. The compact & portable design, a state of art gas leak sensor and monitor achieves remarkable durability assure optimum performace with minimum maintenance.

• Power Supply: 230V AC / 24VDC
• Detected gases: Oxygen(O2), Cl2, CO, H2S, NH3, NO2, SO2
• Make: OLDHAM
• Display: LED Display
• Output: 4-20 mA or ModBus RTU outputs, or on-board relays

• Feature: Front panel buffered output Wide power supply range Cost effective solution

Dual channels for case vibration monitoring in acceleration, velocity or displacement Independent alert and danger- dual relays on each channel Fully digital, long term stability IP 65 or NEMA 4X environmental rating Bright 4 digit LED display

BOD – Biochemical oxygen demand is one of the important parameter of effluent analysis. The SPECTRALAB Microcontroller based BOD Monitor system is based on well known principle of “ Electrolytic Respirometry” In this method exact quantity of oxygen is supplied as per demand & the oxygen required can be directly noted in mg/liter against time. BOD Monitor is designed to measure the oxygen uptake of a given sample continuously. It consist of Cell assembly, Electronic Unit & Magnetic Stirrer. The Sample is kept in continuous stirring to ensure constant absorption of OXYGEN. BOD is to be reported at 27°C for 3 days. However, with this instrument after studying routine samples the BOD can be predicted with in 1 ½ to 2 days by using prediction factor.   APPLICATIONS :   • Study of Biodegradability & Toxicity of organic compound. • Study of reaction kinetics biodegradation of specific waste and its removal from the environment. • Study of specific bacterial strength and enzymatic systems responsible for biodegradation of specific compound. • Study of oxygen up take rate of biomass and their viable concentration present in activated sludge systems. • Monitoring of the performance of effluent treatment systems with greater speed and reliability.   SPECIFICATION : • Microcontroller Based • Electrolytic Respirometry principle • Number samples 2 at a time. Smaple size 1 liter. • Dilution range upto 500 mg/ltr. • Continuous & hourly display of result with graph. • Prediction factor to predict result at 24 or 36 hrs. • Dilution factor for automatic multiplication. • Digital temperature indication of surrounding temperature. • Soft touch membrane key board. • 16 character duel line backlighted display. • Real time clock to give date & time of analysis. • Data protection in case of power failure. • Printer interface for dot matrix printer.

• Application: MACHINERY PROTECTION
• Brand Name: IRD Mechanalysis
• Power supply: 110V, 220 V, 50/60 HZ, AC/DC
• Dimension: 5U HIGH
• Function: API 670
• Usage: Protection of Balance of plant equipment
• Port: MUMBAI
• Model: RACK BASED
• Software: VIBRATION ANALYSIS

• Feature: Quality assured,Durable,Cost effective

• Input: Powered from Battery Under Test
• Measurement: 6V to 32V
• Size: 95 x 70 x 20
• Weight: 0.2k.g

Now a days vehicle percentage is increased much. To keep the battery in good health condition it is necessary for vehicle charging system to work properly. Kanaad battery voltmeter is easy to use vehicle charging system monitor. It tells user whether the charging system is working properly or not with visual indications. Battery voltmeter can be used to function as regular voltmeter or as a vehicle charging system monitor using selection switch provided on front. In Charging system monitor mode it gives visual indication of battery UnderCharging and OverCharging. This system can work for both 12V and 24V systems.

• Brand Name: Panasonic
• Screen Size: 42

• Application: Industrial
• Material: Mild Steel
• Country of Origin: Made in India
• Brand Name: A1 Industry
• Size: 63 Mm
• Pressure: 0.6 LPM
•  :  

LED technology with excellent picture quality with Mega contrast ration & ergonomic design with comfortable viewing experience.

• Mounting Type: Panel Mount
• Display Resolution: 480x272
• Frequency: 50/60 Hz
• Protection Rating: IP65
• Supply Voltage: 24 V DC
• Screen Size: 4.3, 7, 10.1 inch

Single & Double Pass based Optical Instruments designed for monitoring Dust and Particulate concentrations (mg/m3) in the exhaust gas of industrial combustion or Air filtration processes, offer an ideal solution to your Emissions monitoring or Process control requirement. These continuous particulate monitors use either the standard obscuration opacity technique with zero and span checking or the innovative Dynamic Detection Principle technique which eliminates the need for zero and span checking through an immunity to drift with dirty optics.

Continuous Multi Gas Monitoring Complete Automatic Operation. Self Diagnostic Check. Diffusion or Suction Sampling. Backlit Alpha numeric Display. Audio and Visual Alarm. Simultaneous Display of Gas name and Concentration Audible Alarm / Low Battery Warning Buzzer Intrinsically Safe No Scope for user error These Compact, self contained and intrinsically safe designed instrument housed in a weather proof high impact plastic case are powered with a replaceable 4X1.2V Dc battery. On switching 'ON', the instrument goes thorough its complete self integrity check, and displays factory set Warn and Alarm values before indicating 'Ready' for monitoring While in Operation, the instrument monitors the work place continuously giving the latest update concentration of designated Gas through diffusion sampling. Suction sampling is possible with an optional manual or battery operated pump and adaptor. The poison resistant Pellister or long life, integrally mounted electrochemical Sensors with inbuilt cross interference filters are gas specific. Optionally the sensors can be mounted on an extension cable for monitoring inaccessible locations before entry. The instruments emits an audible beep every 15 sees that provides confidence to the user that he is well protected. Audio, Visual also Warn and Alarms protect him from hazardous situations.

We are offering energy monitors

• Color: Black
• Country of Origin: Made in India
• Screen Size: 20''-24.9''inch
• Surface Finish: polish

• Applications: Clean room application in Pharmaceutical, Pharma Environments monitoring applications
• Display: 4 digit Seven Segment 0.4” Red LED display for Differential Pressure Indication
• Status indication: 2 LEDs for Alarms; Integrated Buzzer for process violation of Alarm limits.
• Sensors: Integrated Differential Pressure Sensor;
• NOTE: Other Differential Pressure Range/Unit, Available on request, contact to factory.
• Accuracy: - Differential Pressure : ± 1 % of FS
• Communication: Isolated RS-485 communication with Modbus RTU Protocol
• No. of salve ID: 1-250
• Programmable parameter: 9600 bps, Parity, Data bits, Stop bits
• Set point: 2Nos. AL1, AL2 User Programmable
• Programming of parameters: 3 Nos. push button front keys (with password protection)
• Alarm logic: High or Low, user programmable
• Operating Ambient Temp.: 0 to 50°C
• Humidity: Below 90% RH, Non condensing.
• Supply voltage: 24VDC ± 10%
• Power consumption: Less than 1.2 watt at 24VDC
• Flush mounting plate: SS-304
• Front plate size: 110 mm(W) x90 mm(H)
• Back enclosure: 76 mm (W) x70mm(H) x45mm(D); MS with powder coated
• Mounting: Modular wall mounting with Stainless Steel Front

• Screen Size: 27 inches
• Interface Type: HDMI, VGA
• Resolution: 1920 x 1080 p
• Brand: HP
• Screen Type: Flat

• Model Number: S340C
• Brand Name: HP
• Display Type: Curved Display
• Frequency Range: 50-60 Hz