Concrete Coring Machine Dealers in Fort, Mumbai

We offer seed cum fertilizer drill machine. Seed cum fertilizer drill machine is used to plant variety of crops like wheat, maize, millets, pulses etc. It is available in single top box and double top box (one of seed, other for fertilizer) having 891113 tynes & operates with minimum 25 hp tractor gill single top box 9 length (over all) 84" width from divider frame to linked 35" height (from ground level to seed drum top) 15" no of tyne (for rows) 9 no (forged pieces of 25 mm thick flat) wheel position adjustable 8" to 9" gear mechanism 18 teeth gear fitted on 1" dia shaft and 10 teeth gear fitted on m.s wheel no. Of dividersfeeder 9 no. Attached with seed drum wheel position adjustable m s 6 mm thick plate + flat adjustable covering 18 dia" feed mechanism (c I bodies) specially designed seed divider'sfeeders fitted at bottom base of seed drum and will be adjustable according seed body (frame): m s angle 50 x 50 x 6 mm m s flat 65 x 10 mm m s flat 50 x 10 mm body (sheet): m s 2.90 mm 10 gauge m s 2.00 mm 14 gauge prime mover driven with minimum 35 hp tractor and above output approx 1.5 to 2.5 acerhr weight 310 kg gill double top box 9 length (overall) 84" width from divider frame to linked 35" height (from ground level to seed drum top) 45" no of tyne (for rows) 9 no (forged pieces of 25 mm thick flat) wheel position adjustable 8" to 9" gear mechanism 18 teeth gear fitted on 1" dia shaft and 10 teeth gear fitted on m s wheel no of dividersfeeder 9 no attached with seed drum 9 no attached with fertilizer drum wheel position m s 6 mm thick plate + flat covering 18 dia" feed mechanism specially designed seed divider'sfeeders fitted at bottom base of seed drum and will be adjustable according seed body (frame): m s angle 50 x 50 x 6 mm m s flat 65 x 10 mm ms flat 50 x 10 mm body (sheet): m s 2.90 mm 10 gauge m s 2.00 mm 14 gauge prime mover driven with minimum 35 hp tractor & above output approx 2 to 2.5 acerhr weight 390 kg

• Drilling Capacity in M. S.: 13,19
• Column Diameter: 46.10

13 MM Bench Type Pillar Drill, Our product portfolio now includes over 300 cutting-edge products that meet various requirements & specifications. Atlas Machines also has presence in the global markets, and exports Machinery & Equipment World Wide.

Column-type Planer-type Gantry-type Machines Vertical Horizontal Spindle Machines Single Multi-Spindle High Precision Rigid Construction for Resulting in Good Surface Finish

Description: Heavy Duty Radial Drilling Machine Large base plate with broad column to withstand heavy load Column sleeve carrying arm rotates on ball bearing at top & bearing rollers at bottom Spindle is made of alloy steel. It moves on taper roller bearing Auto Feed 0.115 mm/rev is standard. Six Feed Range of 0.12- 1.2 mm/rev is optional Optional: Spindle Speed of 50-1600 RPM with Dual Speed Motor Accuracy: As per IS Standard 2199 Movement of drilling head parallel to base plate 0.015mm/ 1000mm of traverse True running of taper in spindle at top position 0.015mm Application: Machining of large components in Workshops and Fabrication Shops Drilling, Tapping, Counter Boring, Reaming, Screwing, Thread Cutting and Counter Sinking Suitable for Steel, Cast Iron, Alloy Steel, Stainless Steel, Medium Carbon Steel, Non-Ferrous Material Accessories:Box Table, Drill Vice, Machine Vice, Coolant System, Tapping Attachment

This is a  precision heavy duty all geared radial drilling machine. The machine is supplied complete with suitable HP 440 volt 3 phase AC electric motors for main spindle, Elevating motor and for Coolant pump with Control panel with limit switches. Heavy Duty Box table  is also supplied as standard accessory. It is available in three models with drilling capacities of  38mm and 50mm in mild steel and with distance between Spindle centre to Column centre of 1160mm, 1270mm and 1500mm.

Standard Accessories : Box Table, Electric Motors AC/400/440 Volts, Panel Board for Centralised electrical Controls and Limit Switches, Machine Lamp, Coolant Pump Complete with fittings, Set of Foundation Bolt, Instruction Manual, Spare part List & Tool Box Special Accessories : Machine Vice, Boring Attachment, Tapping Attachment, Drill Chuck, Socket & Sleeves & Tilting Table

We are offering pillar type drilling machine. Backed by experienced and expert team we are offering range of pillar type drilling machine.

Simple in its design, it's very powerful and stable in use!  

We are one of the trusted names in the market for Core Drill Bit which comes under the types of Core Drill Standard & Extra Long Drill upto 550 Long. We offer Core Drill Bits in varied dimensions, designs and specifications to meet buyers requirement.

Fiber Optic Laser Marker, CO2-B55 Laser Marking Machine

Column, Arm, Work Head & Gears are made out of Closed Grain. Parts Properly Balanced. Prior Assembling of Main Gear & Pully. Parts finished on imported Grinding M/c. All Moving Parts Finished to Close Tolerance. Spindle Ram is made out of Alloy Steel. Main Spindle & Pinon are Made out of EN Forged Steel.

  Features :- • Made from 20MnCr5 case hardened to 55-58 HRc. • As per IS : 6702 - 1972 (Equivalent to DIN : 2185 - 1972 & ISO : 238 - 1974) • Precision ground externally & internally. • Concentricity within. 015mm.  

At the initial stages of using raw material for the production, our dedicated quality staff makes certain that the inputs used are of premium quality. Thus, our offered range is highly appreciated for the quality. Keeping pace with the contemporary market trends, we ensure on-time and safe delivery of the orders.

These multi spindle drilling machines are mainly used in automobile industries for drilling holes in crankcase, cylinder head, connecting rod etc. The drill head is supplied with high pressure through coolant or external coolant depending on the application. The drilling feed is provided by a CNC table or a hydraulic table. The drills are guided in a mobile jig plate or a fixed jig plate depending on the application. The drills are mounted on to the spindle using an adjustable adaptor or a stub tool holder.

It is often necessary to drill or machine parts at an angle of 27° 30’. We offer adjustable angle heads for this purpose. All types feature a stable steel housing, preloaded spindle bearings; lubrication; hardened and lapped spiral bevel gears, transmission ratio 1:1, fixed direction of rotation; housing rotatable by 360° in the drive axis and with 2 x 90° horizontal swing; rotational and geometrical precision. We are naturally also prepared to adapt these heads to your machines and requirements.

• Core dril long 55 mm: 12-120 mm
• Reaming: Less Than Or Equal 50 mm
• Twist Drilling: Less Than Or Equal 45 mm
• Friction Clutch: Yes
• Permanent internal lubrication: Yes
• Direct arbor: 32 mm weldon
• Weight: 51 kg
• Magnet Size: 120 x 360 x 65 mm
• Stroke: 310 mm
• Voltage: 230 V AC , 50-60Hz
• Motor Output: 2300 Watt
• Core drill extra-long 110 mm: 20 - 120 mm
• Swivel Base: No
• Carbon Brush Wear control: Yes
• CW CCW Rotation: Yes
• Overheating Protection: Yes
• Magnet Indicator: Yes
• Full Wave Control Electronics: Yes
• Torque Control: Yes
• Speed range 1: 30 - 80 min -1
• Speed range 2: 50 - 120 min-1
• Speed range 3: 130 - 350 min-1
• Speed range 4: 210 - 550 min-1
• Morse taper: MT 4
• Thread Cutting: Less Than Or Equal M4 2
• Countersinking: Less Than Or Equal 80 mm

diamond saw segments, Diamond Wire, Diamond Saw Blade

• Dimension: 480*420*560mm

Max. Drilling Thickness : 40mm,Max. Central Distance : 180mm,Diameter of Holes : 2 - 8mm,Speed : 2800Rmin,Main Motor : 220V 50Hz, 0.25 Kw Weight : 30 Kgs,

• Type: Electric Drill
• Max Hole Size: 15 mm
• Voltage: 220V
• Power Type: Pneumatic

• Model: SWC 35, SEC 50, SWC 100 WT
• Warranty: 2 years
• Brand: SCHIFLER
• Is It Variable Speed: Non Variable Speed

• Features: accurate spot drilling, long life expectancy, low weight, reduced vibration, straight, circular holes with flat base, significantly improved performance when drilling steel reinforcement
• Brand Name: PROJAHN - GERMANY

horizontal rotary table drilling machines

• Type: Milling Machines
• Machine Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Operating Mode: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years
• Driven Type: Electric, Hydraulic, Pneumatic
• Type: Milling Machines

• Power Consumption: 600 W
• Is It Variable Speed: Variable Speed
• Model Name/Number: GB-12V
• Brand: Black & Decker
• Battery Voltage: 9.6 V
• Drilling Diameter: 6 mm

• Rated Input Power: 700/750W
• Rated voltage: 220-240V
• Rated frequency: 50Hz
• Capacity: 10mm/13mm
• No load speed: 2700/1800rpm
• Net weight: 2/2.1 kg

Drilling in wood, metal and plastic. Impact drilling in concrete and masonry materials.

Multiple-spindle drilling machines are used for mass production. These machines are great time savers where many pieces of jobs having many holes are to be drilled. Multi-spindle head machines are used in mechanical industry in order to increase the productivity of machining systems. The multiple- spindle drilling machine is a production type of machine. It is used to drill several holes in a work piece simultaneously, in a single setting. This machine has many spindles driven by a single motor and all the spindles are fed in to the work piece simultaneously. These machines may be either horizontal or vertical type. The drill heads consists of several spindles mounted on angular contact ball bearings and driven by a set of gears. For spindles wherein the center distance are very close needle roller thrust bearings are used. The drive to the spindle is by AC spindle CNC motor or by AC induction motor. The speed of the spindles driven by induction motor is varied by using variable frequency drive. The drill head is interchangeable. These multi spindle drilling machines are mainly used in automobile industries for drilling holes in crankcase, cylinder head, connecting rod etc. The drill head is supplied with high pressure through coolant or external coolant depending on the application. The drilling feed is provided by a CNC table or a hydraulic table. The drills are guided in a mobile jig plate or a fixed jig plate depending on the application. The drills are mounted on to the spindle using an adjustable adaptor or a stub tool holder.

• Material: Stainless Steel
• Type: Core Drill Bit
• Use: Masonry Drilling
• Usage/Application: Concrete Drilling
• Drill Dia Size: 100+ mm

Electro-Discharge-Machining as a manufacturing process has travelled from spark erosion, to precision machining processes like Wire-cut EDM & EDM Drilling. With our rich experience of working with industries that have adopted this process as an integral part of their manufacturing, we are in a position to offer a variety of solutions that make EDM processes more efficient. We have been the leading EDM Wire Manufacturers and Suppliers in India since 1985. In addition to our 2 state-of-the-art EDM Wire manufacturing factories, we also offer our customers the full range of EDM Consumables like EDM Wires, EDM oil, EDM Graphite, Resin, Filters, Metallic Electrodes, EDM Machine Spares, etc. It's always been our philosophy to not just be suppliers, but also to be process partners to our customers. As your partner it is essential that we provide you with quality products and impeccable service

• Type: Core Drill Machine
• Weight: 100-500kg, 1000-2000kg, 2000-4000kg, 500-1000kg
• Color: Black, Brown, Grey, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Driven Type: Electric, Hydraulic, Penaumatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Warrenty: 1year, 2years, 5years

Manual Foil Cutter, C-002 Plastic Corner Cutter, 3 In 1 Closer Machine