Conical Spring Seal Dealers in Jogeshwari, Mumbai

We are offering Single Spring Mechanical Seal. Applications Generally used in sewage application, waste water pumps & fuel injection pumps Operating Limits Shaft Dia. : 10 to 100mmPressure : up to 10 BarsTemperature : -20 to 150 C.

• Material: Metal
• Shape: Round
• Color: Grey
• Surface Finishing: Coated
• Speed: Up to 15 M/s
• Shaft Diameter: Up to 12 Mm to 80 Mm
• Velocity: Up to 15m/s

Conical spring mechanical seal with O-Ring in rotating and stationary parts.   Characteristics Unbalanced Mechanical Seal. Dependent on direction of rotation.   Operating Limits p: <11 Bar ; V: <15 m/s T: -40 / +180ºC Temperature is based by material selection. Operating limits are based on PV factor.

• Pressure: 10 bars
• Sizes: 10 mm to 100 mm

Conical Spring Seals is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Conical spring Unbalanced seals has taper Spring of various type and dimension to suit lot of media.Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively.

• Country of Origin: India
• Size: 2.5 inch
• Type: Single Spring Seal
• Material: Stainless Steel
• Shape: Round
• Color: Silver
• Surface Finishing: Coated
• Spring Type: Single
• Brand Name: Hydro Serve
• Shape: Round

• Application: Use in corrosive chemicals, hydrocarbons, general & light Chemicals.

In order to produce quality products, we make use of superior grade raw materials. Our quality auditors strictly check the raw materials against varied quality parameters before procurement. With our strong distribution network, we efficiently distribute goods to the desired place.   Operating Limits : Pressure  -  10 bars (Max) Temperature  -  (-)20c to (+)180c Speed  -  2900 rpm (Max) Sizes  -  10 mm to 100 mm Material  -  Seal Face  -  carbon, Silicon, Cerantic, TC Secondary Seals  -  Viton/PTFE/GFT Metal Parts  -  ss 3'16, 904 L. A tov 20

• Velocity: 10.0-15.0m/s
• Model: SACS3/SACS3B
• Application: Generally used for handling corrosive chemicals, hydrocarbons, general & light chemicals
• Faces: Carbon / Ceramic / Sic. / Tungsten Carbide
• Secondary Seals: Viton / PTFE / FEP / GFT
• Hardware: SS316 / HAST-C / ALLOY-20
• Shaft Dia: 12mm...80mm 0.5 Inch...3.5 Inch
• Pressure: 10.0bar (max...)
• Temprature: -20'C TO 180'C

• Temperature: -60oC to +180oC
• Diameter: 10mm to 100mm

The Clockwise rotating shaft required Right hand spring & the Anti Clockwise rotating required Left-hand spring. The rotating shaft transmits the drive to conical spring. The seal are easy to fit & pushed with shaft step or drive ring supports. This seals are comfortable to used in wide range of application bellow as.

• Brand Name: Micro Seals

“Mechanical Seal - Conical Spring Seals" are extremely rugged & reliable & therefore used in wide range of sealing applications. these seals have very few parts & hence can be easily assembled or dismantled. The seals arrangement does not warrant any modification even in case of conversion from gland packing. The compact design eliminates the requirement of extra radial & axial space for its installation.  Application Use in corrosive chemicals, hydrocarbons, general & light Chemicals.   Operating Limits Pressure : 10 bars (Max)Temperature : (-)20c to (+)180cSpeed : 2900 rpm (Max) Sizes : 10 mm to 100 mm   Material Seal Face : carbon, Silicon, Cerantic, TCSecondary Seals : Viton/PTFE/GFTMetal Parts : ss 3'16, 904 L. A tov 20.

• Application: Chemical Plant, Oil Refinery, Water
• Secondary Seal Material: Viton, NBR, EPDM, Sillicon
• Metal Parts: SS304, SS316

Operating Limits : Seal Size - 12mm to 50mm Pressure - 10kg/cm Speed - 10m/s Temperature - -15o ..to 180oC Face Material : Rotary Face - Carbon, Sillcon, TC Stationary Seats - Carbon, Silicon, TC Type - S-9, S-6, S-4

Low cost seal used in all types of domestic and industrial pumps, used with light oils, water, aquous solutions, antifreeze and general liquids.

Single Spring Mechanical Seal, Multi Spring Mechanical Seal

We manufacture Conical Spring Seals which are loaded with various combination of face such as solid carbon and shrunk fitted. Our range of Conical Spring Seals are extremely sharp and reliable, therefore it is used for various sealing applications. Features Standard designUnbalanced SealInside MountedDependent of RotationEasy installation Applications Dairy IndustriesFood Processing IndustriesGeneral IndustriesPharmaceutical Industries Two versions : Balanced Seal -TSBUn-Balance Seal – TS Operating Limits : Diameter : 10â€Â¦.. 100 mmPressure : 10 barTemperature : -20oC â€Â¦ +120oCSpeed : 15 m/s

We hold specialization in manufacturing and supplying Conical Spring Seals. These Conical Spring Seals are known for the excellent make and durable life. The Conical Spring Seals, we provide, are much demanded by several industries for excellent features. To cater to the diverse needs of the clients, we provide the Conical Spring Seals in assorted sizes and specifications.

• Size: 10 mm to 100 mm
• Usage/Application: Industrial
• Model No.: RI-109U
• Pressure: 10 Bar (Max)
• Temperature: - 20 Degree To + 180 Degree C
• Seal Faces: Sic/ carbon / TC VS Ceramic / Sic / TC

• Velocity: 15 m/sec
• Shaft Diameter: 10...100mm
• Pressure: 20 bar (max)
• Temperature: -20...180OC
• Seal Faces: Carbon, Ceramic, SiC, Tung. Carbide
• Metal Parts: SS304, SS316
• O-rings: Elastomers, TTV

Series AES-003 are a cost effective version of a balanced seal. They feature the same rugged and reliable construction as the unbalanced spring seals in AES-001. These seals are primarily used in the chemical sector and in water pumps.     SEAL CHARACTERISTICS • Single Seal• Unbalanced• Conical Spring• Dependent on direction of rotation     APPLICATIONS • Water pumps• Submersible pump• Sewage pump