CONNECTWELL INDUSTRIES PRIVATE LIMITED Dombivali, Mumbai, Maharashtra

These stainless steel glands are liquid tight, offer excellent strain relief and have lameller designed plastic inserts for protection against distortion. These glands are suitable for use in tunnel lighting and chemical industry where high mechanical and chemical resistance is required.

Tube End caps provide an IP66 covering at the end of corrugated tubes. The cap can be cut to accomodate pass through of different size wires.

Material : High Quality Rubber (NBR)

Solid state switching technology allows switching speeds upto       20 MHz-No physical / mechanical switching operation hence an operation life which is 10^5 times more than electro mechanical relays.-Solid state technology ensures 100% switching with absolute no bounce or chatter.-The transistor coupled with optical isolators ensure a higher isolation level between the input and outout.-Option of fuse protection at output side.

These Terminal Blocks are used with thermocouple wires in measurement applications. As per DIN 43713 & DIN 43714 the current carrying element of the Terminal Block is made of the same material as the Thermocouple wire. These special current carrying elements ensure that there is no loss of potential at the connecting points.  

  These blocks are used measuring control and regulatory circuits. they provide a clear functional advantage for devices having utility instruments and associated transformers.in ckt4u disconnection is achieved by lifting a lever which operates the knife contact. Specially designed socket headed screws act as test monitoring points in disconnecting & test Terminal blocks.  

These strip connectors feature tubular screw clamps and wire protectors which are actuated by a screw. They are available in 2.5, 4 & 6 sq.mm. sizes and are compact & ideal for small spaces. They can be used as free floating connectors or as panel mounted terminal blocks. Available in standard 12-pole strips these also offers pre-cut strips of any number of poles less than 12.

Safety switches with separate actuator are positive opening position switches. In terms of design, the switching element and actuator are separated. On actuation, the switching element and actuator are brought together or separated. The positive opening NC contact is always open when the actuator is withdrawn. These switches are assigned to Type 2. Available Types: SKT,SKI,SK,SKC,I88, ENK, ENM2, GC

Safety position switches with interlock function ensure that safety gates, safety doors and other protective guards remain closed for as long as a hazardous situation exists. In production processes safety position switches have three main tasks: Enabling the machineprocess when the safety guard is closed and interlocked Disabling the machineprocess when the safety guard is opened Position monitoring of the safety guard and interlock. The SLK SLM safety position switches with separate actuator and interlock enable the user to realise locking systems conforming to EN 1088, EN ISO 12100-1, 12100-2 and since 29.12.2009 to the compulsory Machinery Directive 200642EC. Available Types: SLK,SLM

Protective hoods and safety guards on machines such as gates in safety gate systems are often pivot mounted with hinges. The SHS and SHS3 combine a hinge and safety switch in one single functional unit. The safety guard is monitored directly in the hinge. For applications where no SHSSHS3 can be used, the switches TI2I88 AHDB and I88GC VKS VKW are possible. Available Types: SHS3, SHS3 (Double), SHS, Ti2 I88 AHDB, SHS

Surface mount type housings are used where a cable terminates into the male or female insert housed inside it. i.e. It is mounted on a plain surface with a cable coming into the housing via a cable gland mounted on the body of the housing. In this case a single lock mechanism ensures IP 65 class protection to the inserts after mating with the appropriate hood.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.  

In order to have secure connections ,not only is it important to use good quality terminal blocks but also correct tools for securing these connections .Connectwell has range to ergonomically designed professional tools for all your wiring needs. This is the versatile stripping tool for cables and conductors from 0.02 - 10 sqmm. It has the self adjusting , stripping length mechanism of upto 18 mm and can also cut wires of upto 10 sqmm stranded and 1.5 sqmm solid.  

These connectors are used to clamp flexible corrugated conduits. They offer IP67 protection. These connectors are available with mounting holes for fixing on the panel or equipment surface.

These connectors are used to clamp flexible corrugated conduits. They offer IP67 protection and are available in Pg, Metric, PF and NPT threads.

These Conduit Glands for AMPC conduits are made of Polypropylene and consist of one piece swivel fitting with integrated ferrule. They are available in METRIC as well as Pg thread.

Material : PP (Polypropylene)

These Conduit Glands for ANMSF conduits are made of Polyamide 6 and consist of 2 parts nut and body. They are 0 available in straight and 90 elbow. They are available in METRIC as well as NPT thread.

Material : Polyamide PA-6, V-2 , halogenfree

These stainless steel glands are liquid tight, offer excellent strain relief and have lameller designed plastic inserts for protection against distortion. These glands are suitable for use in tunnel lighting and chemical industry where high mechanical and chemical resistance is required.

2.5 sq.mm Standard Feed Through Terminal Blocks 2.5 sq.mm Feed Through Terminal Blocks are the most Versatile terminals for control, Automation, Instrumentation and Power Distribution applications. These Terminal Block are ideal choice for use in High Temperature applications. These Terminal Blocks can be mounted on standard rail and available for wire sizes 0.25 to 2.5 sq mm.These Terminal Blocks have marker holding recesses to accept marking tags for circuit identification. Cross connection can be achieved with the aid of shorting links / sleeves & screws. The specially designed Knock Out at the centre must be removed to facilitate Permanent shorting.

These glands are liquid tight, easy to assemble and offer good strain relief with wide clamping range. The lamellar construction of glands provide an excellent grip on the cable. These glands offer gas and water tight sealings. Cable glands with reduced clamping range are also available on request.

The S.L.I. Conduits made of stainless steel are highly flexible and mainly being used as an instrumentation hose. The S.L.I. Conduit is also used in steel and aluminium foundry industry, machine and apparatus-building. The S.L.I. is very popular in the fibre optics industry also. These hoses are used where chemical and mechanical protection is needed and high temperatures are involved.

These Terminal Block are preferred for connections that involves safety requirements of the electric supply industry (ESI) standards, in addition to the high torque screws,  

Spiral glands offer maximum protection against conductor fatigue caused by flexing cables, Designed for kink protection and mainly used for moving machine assemblies.

SPECIAL CRIMPING HAND TOOLS FOR TURNED CRIMP CONTACTS:Ergonomically design UL CSA approved complete crimping tool with 1) Die set for wire section 0.14 - 4 sq.mm 2) Locator for contact dia 4 sq.mm . Economical crimping tool for turned contacts with rachet for 1) Wire section 0.5 - 6 sq.mm 2) Contact Dia 1.6 (10 A) Dia 2.5 (16 A) Dia 4 (40 A)