Control Panels Dealers in Marol, Mumbai

We are working with experienced staff and veteran professional; they make every effort to keep the products safe from external damaging factors, by using finest material for wrapping. We have a good rapport with the leading names in the industry from whom we source the basic material, required for manufacturing superior grades products.

We are main supplier of this product.

We are offering automatic power factor controller. Nippen model uno+ is used for measurement and control of pf using reactive power compensation. Capacitor banks are suitably switched on and off automatically to provide necessary compensation. An intelligent switching algorithm (wear leveling) ensures uniform aging of the capacitors used to achieve the target pf. an alarm function ensures protection of capacitor banks against abnormality in voltage, current and sets value of capacitors whenever these are beyond the higher and lower threshold limits. Ct polarity is automatically sensed internally in the event of reverse connection.

We are pleased to introduce ourselves as a leading manufacturer of instrument control Panels. We have till date supplied a variety of control panels to a large cross section of industry. A few highlights are specified in the foregoing pages.     1) Product range of instrument panel division   Product range of our instrument panel division suitable for different degrees of protections. These are classified as follows :-  1. Simplex panels.  2. Duplex panels with walk way.  3. Curved graphic panels.  4. Cubicle type panels.  5. Desk type panels.  6. Semi-graphic panels, with mimic on acrylic, fiberglass or mosaic tiles.  7. Full graphic panels.  8. Instrument racks.  9. PLC panels. 10. Relay based panels. 11. Purged panels. 12. Explosion proof panels. 13. Analyzer shelter for hazardous location. 14. Intrinsically safe systems. 15. Weatherproof panels. 16. Pneumatic interlock panels. A) Pneumatic well-head shutdown panels for off-shore oil platforms. B) All types of pneumatic logic panels for diesel engine driven pumps, compressors and generators. We have also supplied in past control room instrumentation panels for pneumatic controllers,recorders & indicators of reputed makes like Taylor, Foxboro, Kent etc.    2) Services Offered By Us :       For instrumentation purpose, our service include the following :-  1. Basic design & engineering.  2. Technical advice.  3. Selection/Sourcing of equipments & systems. 4. Detailed engineering. 5. Application software development. 6. Manufacture of panels. 7. Integrated testing of system. 8. Erection at sites. 9. Pre-commissioning checks.10. Assistance in plant commissioning.11. Post sales support.12. Post warranty support.   3) List of Consultants with whom we are registered :     We are approved suppliers of Instrument Control Panels for the following leading consulting engineers through   whom we have executed several projects.  

• Body Material: Mild Steel
• Phase: 2 Phase
• IP Rating: IP55
• Coating Type: Powder Coating
• Operating Voltage: 210-415 V

  In Most Of The Industries, Due To The Fluctuating Load Conditions, The Power Factor Also Varies Accordingly. Hence It Is Practically Difficult To Maintain A Penalty Free Power Factor With Fixed Compensation Of Capacitors. This Results In Low Power Factor And Leads To Higher Kva Demand And P.F. Penalties.Due To Variable Load Conditions And Cumbersome Manual Switching Of Capacitors The Power Factor Can Not Be Maintained At Desired Levels. As Close Monitoring Of Power Factor Is Required All The Time To Avoid Penalties And To Minimize The KVA Demand, Automatic Power Factor Correction Panels Are The Best Solutions.The Panel Are Manufactured Using Micro Controller Based Control Relay To Control The Capacitor Switching. All The Settings Are Done By Finger Tip Key Pad With Options To Select “FIFO” Of “CYCLIC” Order And Many More.The Panels Are Made Based On Study Of Your Load And Perfect Tuning Is Possible To The Requirement Of Your System.   Advantages Of Automatic Power Factor Panels :    Avoids Power Factor Penalties. Reduces KVA Demand Avoids Leading Power Factor. Avoids Over Excitation Of Generators.  Minimizes Line Losses. Minimizes Transformer Losses. Protects Motors, Switchgears From Improves Voltage Conditions.

• REV/ FOR WARD CORRECTIONS: 110VAC AND 230VAC

We are offering electric control photo cell units are in ffs machines and bisuit packing machines. This controller with print mark scanner gives proper registration so as to achieve good finished products.it's give auoto correction for packing products at it's line of control.

• Type: Solar Panel
• Certification: CE Certified
• Application: Industrial, Toproof
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power Source: Solar
• Warranty: 1Year
• Solar power: 1Kw, 250W, 500W, 750W

• Color: As per client requirement
• Quality: Superior
• Main function: Power distribution, motor control
• Min. Order Quantity: As per client requirement

We have superior storage facility to keep large product range that we make available. In order to meet elevated quality norms, we keep it updated with modern work methods. With the assistance of sophisticated packaging system and adroit professionals, we are able to provide flawless lot of products as we ensure complete safety during packaging.

Get in touch with us for acquiring excellent quality Elevator Control Panel at the most desirable prices in the market. Our Control Panel is fabricated using high-grade stainless steel ensuring long working life. We can make available Control Panel with Emergency Light, Fan Switch, Attendant Key Switch and many more. Our Elevator Control Panel is available at the best prices in the market.     Control Features / Indicators   Car Call Registration Indicators Digital Position Indicator Up/Down direction Indicator Car Pre announcing LED indicators Start, Stop, Non stop, Buttons Door open /close buttons (for Autodoors) Emergency light Emergency Bell button Overload Indicator (Optional) Attendant Key Switch Fan Switch    

• Application: Automobile
• Phase: Three Phase
• Material: Mild Steel
• Frequency: 50/60Hz

• Type: Industrial Control Panel
• Color: Grey, White
• Application: industrial
• Body Material: Mild Steel
• Power Source: Electric

We are a professionally managed organization which is wholeheartedly engaged in the exporting of different types of industrial control panel. Our electric control panel is considered as the picture-perfect example of modern engineering because it works impeccable with the least consumption of electric power. We are one of the well-known temperature control panel exporters, located in India. We have immense experience in dealing with wide gamut of industrial control panel, electric control panel, temperature control panel etc. We never compromise with the quality of our product. The range of control panels offered by us include temperature control panels, motor control center, control panels for eot cranes and furnaces.

• Application: Industrial
• Color: Silver
• Brand Name: Delux Industries
• Material: SS
• Shape: Rectangular
• Surface Finish: Polished
• Packaging Type: Box
• Minimum Order Quantity: 10 Onwards

• Type: Addressable Fire Alarm
• Application: Office
• Brand Name: Ravel, Honeywell, Cooper, Notifier, Morley, Apollo
• Voltage: 24VDC
• Material: MS
• Zones: Multi Loop

Lever Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists to prevent over Travel of hoisting motion on power and control circuit up to 500 V and 40 Amps. continuous current. The limit switch normally remains closed and cuts off power to stop the motor of the crane. The Lever limit switch operates when it reaches a Predetermined position when the lever is moved over a projecting member fixed on the girder.

• Usage: Industrial use
• Type: Lever Limit Switch
• Material: metal
• Certification: ISO 9001:2008 Certified
• Color: Orange
• Condition: New
• Max. Voltage: 440 V
• Surface Finishing: Polished
• Switch Type: Rotary Limit Switch
• Current Rating: 40 amp
• Features: High strength, Rust proof, Low maintenance

Synchronizing panel, Synchronization panels are mainly designed and used to meet power system requirements. These panels function both manually and with an automatic synchronizing function for two or more generators or breakers. They are widely used in synchronizing generators and offering multiplex solutions. Our high quality range of DG synchronizing panels is available with capacities of connected generators upto 10000 A, and are fabricated by our engineers using premium quality electrical components.

• Feature: Available in standard & customized specifications, Includes all ACBs, MCCB etc, MCC, PCC panels, Multi compartmental design, Additional Information:
• Item Code: MCC-PCC

• Brand Name: TAGLab

We are offering operation control panel. Various experiments on sub - station operation & protection can be performed this is a simulator based system for study of a sub - station having short medium long transmission line as incoming line to the sub - station separate fault simulation circuit different protection schemes available.

• Phase: Single Phase or Three Phase
• Frequency: 50-60 Hz
• IP Rating: IP65
• Power: 230 or 440 Volt
• Current (Amps): 20
• Dimension: 400 x 1000 x 1200 mm

We designed and manufactured AC/DC Drive panels of ratings up to 300 KW for Cement, Metal , Chemical and material handling Industries for LARSEN & TOUBRO LTD control & Automation Division - Mahape for the following customers: Indian Oil Corporation Limited Indo Bharat Rayon (Indonesia) Rajshree Cement J.K Cement Birla Cement L&T Cement Sunflag Iron Steel Jindal Steel (Hisar) Songo Gas Development (Tanzania) NALCO

• Features: Multi-colored LED,Vinyl board for Mimic,Protective Acrylic cover,Annunciation system

PMCC Technical specification: Rated Service Voltage: 415 V Rated Frequency: 50h Rated Insulation Voltage: 660 V Busbar System: TP-E or TPN-E   (with isolable neutral) Max.Rating Of Busbars: 6000 A Fault Level Withstand: 50 ka /  65 ka FOR 1 SEC Degree Of Protection: ip 41/ 54 Proven interleaved busbar system for PCC / PMCC Concept: In conventional busbar system, conductors of each phase are grouped together. At higher current ratings in each phase, more than one flat of busbars placed quite close to each other are used. Skin effect & Proximity effect, causes uneven current distribution in each flat of the same phase which also results in unequal temperature rise in different phases. At higher currents increase in cross-sectional area of conductors does not yield proportionate increase in the current carrying capacity of the busbars. The interleaved busbar system offers a cost effective solution. Cable termination:     Cable Termination is at the rear of the panel. Elecmech Standard PCC / PMCC panel dimensions are more than sufficient, However Panels can be custom designed for adequate space for termination of increased number aluminium cables for special cases such as for Material Handling Applications Stacker Reclaimer, etc. Though Bottom Cable Entry is Standard, TOP cable entries are possible, and in some non-standard cases with bottom busbar chamber Wide cable alley facilitates comfortable termination of a large number of cables. Shrouded link work for multi-tier configurations ensures complete safety in the cable alley. Standard panels are provided with captive screws / Quarter turn knobs. However customized Panels can be provided with Alphabetical Key lockable doors to prevent un-authorized access to the cable alley. Cabling Space (mm) Power Cables:  600 X 500 (depth 1200)  600 X 600 (depth 1300)  600 X 700 (depth 1400) Control Cables: Control Cables Terminals are provided vertically at the rear side panel on the left. So there is ample space for control cabling. Add on chamber: The cabling area can be extended further by providing an ADD ON CHAMBER to accommodate more cables if needed. Compartmentalised Design For ease of Maintenance and trouble free operation, Elecmech offers standard Single Tier ACB panels upto minimum 550 width, However Multitier designs are also offered for switchgear rooms with space limitations and for cost effectiveness.   Standard Single Tier: for ACBs 630 to 6300A. Multi-Tier Arrangement: 2 tier arrangement for ACBs upto 1600A. PMCC:  8 feeders (fuse switches) in a panel. Flexibility in Compartment sizes. Compartment sizes can be 225 to 900 mm. Auxiliary Equipment Mounted by the side of ACB. Effective utilisation of space. Separate Chambers for Busbars, Droppers Auxiliary Busbars. Panels can be offered confirming to Form 2 / 3 / 4. Other PCC features  The Power Control Centre (PCC) is a free standing and floor mounting type switchboard, suitable for indoor installation. To facilitate transportation, each PCC is split into shipping sections. Each shipping section is wrapped in an HDPE cover and packed in a wooden crate case. To arrive at the approximate overall dimensions of the packing cases, add 300 mm to the dimensions of the respective section. Each vertical panel is divided into distinct compartments Viz busbar chamber, Vertical droppers, Control busbar chamber, d/o feeders / fixed feeders, power cabling chamber at rear with control terminals. The compartments house main equipment like Air Circuit Breakers, Fuse Switches, Moulded Case Circuit Breakers and associated auxiliary equipment. Compartment doors are provided with Sprin Loaded Quarter Turn door fasteners, Which pressurises the door towards the panel frame, ensuring dust-proofness by the compression of gasket between door and panel frame. The cable alley doors are removable type. They are provided with Spring Loaded Quarter-turn locks or can be provided with door locks operable by a special key. Overall Dimensions Weight: 2475. Width : 550, 600, 700, 800, 900, 1000, 1100, 1200, 1300 mm. Depth : 1000 mm (base frame), 1200 mm, 1400mm 1600mm w/o front door. Depth : 1044 mm (base frame), 1244 mm,1444, 1644 with front door and rear door /cover. To increase cabling area, Add-on-chambers with a depth of 300 mm may be provided on rear. Add-on-chambers may also be used for bus duct entry. Relays are accommodated, usually below ACB compartment. usually it is of 450mm / 500 mm Height. Safety interlocks: All PCC feeders incorporate Safety interlock, Unless the ACB is racked out to isolated position, its compartment door cannot be opened. Conversely, the ACB cannot be operated unless the compartment door is closed. However, to facilitate maintenance and inspection, a defeat feature is provided for both these interlocks. Only QUALIFIED PERSONNEL are permitted to use the interlock defeat mechanism. Copper Busbars can also be provided on request. Aluminum Busbar used are of electrolytic E91E grade with manufacturer’s test certificate Busbars are punched using Multihole punching hydraulic press. The Multihole punch and die is specially deisgned for punching upto 4 Holes in one stroke with minimal burrs and no distortion of busbars. Punched Joints are then buffed smooth with special buffing tools to remove Aluminum oxide Layer. The Buffed aluminum busbar is then immediately coated with abrasive antioxidation paste. Excess paste squeezes out of the joints when the al bus joint is tightened removing aluminum oxide and also prevents the aluminum from being oxidized. Aluminum busbars are fastened using High Tensile Hardware High Tensile Fastners are tightened using adjustable and calibrated Torque wrench for optimum tightening torques. Thus optimum pressures are applied to Aluminum at fishplates and Joints ensuring minimal joint resistance and thus reducing heat loss and temperature rise. Non compromising Quality & Reliability Elecmech Panels are built to last for 20-25 year design life. Panels are Powder coated in our recently installed 11 Tank Hot process pretreatment powder coating plant which provides best possible degreasing derusting, phosphatising treatment for ms fabricated panels. Uniform powder coating quality is ensured by our stringent QC process. Standard interlocking schemes are available in our wide database for 2-Incomer, 1-Buscoupler and 3-Incomer with 2-buscouplers, also with standby generators. Standard protection schemes are available in our wide database for transformer incomers, outgoing feeeders with numerical relays from various manufacturers and also conventional relays. ERDA / CPRI Type Tested Panels with valid certification

When the snatch block of the crane reaches its top position the snatch block pushes a plate which is hanging from one end of the lever of the limit switch. Due to the weight placed on the other end of the lever this lever is pushed up. When the lever is pushed up the shaft to which this lever is connected rotates there by rotating the cams which eventually open the contacts and disconnect the motor. The electronic limit switch contacts are automatically reset when the lever returns to zero position due to gravitational force

• Feature: High operating Torque and Positive action.
• Body Material: Bakelite/P.C.
• Operating Voltage ( D.C.): 60% to 120% of rated voltage
• Bazel Size: 36 mm, 48 mm, & 63 mm dia round Bazel

• Features: Precisely designed ,Flawless finish,Compact design Longer service life

Our PCC Single Front Drawout Panel is of one of the best qualities and is highly demanded all over. We have a wide range of Panels with Starters & switches which consists of Industrial Electrical Control Panel, Electrical Power Control Panel, etc. We use one of the best quality parts to manufacture our products so that there is no compromise in their quality. We provide our panels at the most competitive prices possible. We also deliver well within the stipulated time avoiding all delays. Because of our high quality standards, we have also become one of the leading Exporters from the country.