Conveyors Dealers in Fort, Mumbai

Standard Belt Width (mm) 300, 400, 500, 600, 650, 750, 800, 900, 1000, 1200, 1400, 1500, 1600, 1800, and 2000. The belt in width not listed can be manufactured as per the Customer’s requirement. Belt Edges: Belt edges can be given in both cut edge and sealed edges. Carcass: Synthetic Carcass: The carcass consists of Nylon-Nylon (NN) and Polyester Nylon (EP) constructions are available with ratings starting from 200/2-315/3 upto 2000/6. For further information on complete range and grades, refer to the technical belt selection chart. Cotton-Cotton Carcass: The Cotton Carcass belts offered are available in 28,32,34,36,42 & 48 0z from 2 to 10ply construction. Cotton / Nylon Carcass: The range of cotton / nylon Carcass belts are available as per customer’s specification. Advantages of NN/ EP Conveyor Belts: Excellent Flexibillity Very low permanent elongation Excellent Toughability Excellent Cover-to- Ply adhesion Maximum Load Support Suitable for Mechanical fasteners Impact Resistance Suitable for all types of Cover Grades

We are offering industrial conveyor. Features of c-flex nylon conveyor belts: plys: 1 - 12 total thickness: 50 mm (2”) max. Top cover thickness: 25.4 mm (1”) max bottom cover thickness: 0 - 25.4 (1”) mm edge: cut edge or moulded edge max. Fabric strength: ep nn 500 max width: 2200 mm (up to 3100 mm possible) belt with cross breakers available cover selection for nylon ep fabric conveyor belts general light duty service common references: din - z : very economical for moderately abrasive small size material. medium abrasion resistance common reference: din - y, n, rma 2, bs - n 17, as – n, jis – g : recommended for moderate abrasion resistance applications, mostly above ground. Regularly used for transportation of coal, crushed ores, limestone, bauxite, sand, cements etc… high abrasion resistance common reference: din - x, m, rma 1, bs – m24, as – m, jis – s : excellent abrasion resistance against cutting, gouging, heavy impact, during transportation of heavy rocks, sharp stones and highly abrasive materials. Super abrasion resistance common reference: din - w : recommended in extremely abrasive applications such as copper & gold ore, sinter, coke. It provides high resistance without increasing cover thickness and weight of the belt. Oil resistant (or) & moderately oil resistant (mor) : specifically used for transportation of specific materials with high moderate concentration of animal or vegetable fats. The special compound used in the covers, avoids damage swell

Before making the final dispatch, our entire lot is carefully stored in our capacious warehouse under the administration of experts. Thus, there are minimal chances of defects at buyer's end. We have a sound payment policy. Following it, we maintain transparency and only use methods that are safe, secure, and legal. Our clients can choose out of number of options as per convenience. Our Conveyor Rollers are high in demand due to their compact design and high efficiency.  

All types and sizes of conveyor chains manufactured as per industry standards and also as per customers' design and drawings. Excel bran conveyor chains are tried and trusted name in almost every industry like: sugar mills, steel plants, cement, fertilizer and chemical plants. Thermal power plants, mines etc. Please contact for further details.

• Brand Name: COMPO
• Feature: Fine finish,Reliable Sturdy,Reliable price
• Condition: Good
• Product Type: Rubber Conveyor Belt
• Place Of Origin: Mumbai

We have voluminous warehouse that has loading docks to load and unload goods, well-maintained by the professionals. Our completely automated warehouse is sternly supervised to check that products are kept carefully. We are hailing from Mumbai(India) and make sure to reach buyer's specific destination within the promised time frame.   Features : Fine finish Reliable Sturdy Reliable price

• Application: Printer
• Country of Origin: Made in India
• Type: Upper Roller
• Brand Name: Konica Minolta
• Usage/Application: Laser Printer
• Packaging Size: box
• Model Name/Number: 195 215 235 183 162 195 210 220 211 1611 163

• Width: 400 to 2200 mm
• Features: Controlled elasticity, Greater strength, Extended longevity
• Length: 10-20 ft
• Frequency: 50 Hz

Pneumatic Conveying System (Dilute Phase Conveying)   Pneumatic Conveying has decisive advantages in conveying dusty products over mechanical conveying, low space requirements and low maintenance. Also it is flexible in construction, can be easily automated, provides dustless conveying without loss of material and is thus also safe for products hazardous to health. A conveyable product is transported through a pipe by using a certain quality of gas [air or nitrogen]. The product particles are freely moving with the high gas velocity and a low product to air ratio. The different types of Pneumatic Conveyors are   A) Vacuum Conveying System : D. P. Vacuum Conveying System works on negative pressure for conveying the material from one or number of pickup points to one discharge point. This system is best suitable for providing dust free conditions around inlet.   B) Pressure Conveying System : D. P. Pressure Conveying System conveys bulk material by air under pressure. This system offers advantages of conveying material from one place to one or number discharge points.   C) Combined Vacuum-Pressure Conveying Systems : D. P. Combined Vacuum- Pressure Conveying System conveys the material from various pick-up points to various discharge points, it is also used where vacuum pick-up and pressure delivery is required.   D) Closed Loop Conveying System : D. P. Closed Loop Conveying Systems are designed for handling, explosives and hazardous materials. The conveying gas is usually nitrogen for explosive materials, and dry air is used for handling hygroscopic materials.

• Material: PVC
• Color: green
• Features: Heat Resistant
• Application Area: conveyers
• Length Of Belt: Customized
• Rubber Material Grade: industry
• location: pune

• Material: Mild Steel
• Tensile Strength: 10- 500 kN
• Application: Conveyor
• Grade: SS304, S316
• Corrosion-Resistance: Yes
• Chain Range: From 3/4 Inch pitch to 3 Inches pitch
• Features: Excellent texture, Free from flaws, Long lasting.

• Shape: Round,Circular
• Finishing: Polished,Color Coated
• Color: Grey,Metallic,Black
• Packaging Type: Corrugated Boxes,Poly Bags
• MAterials: Stainless,Steel,Mild Steel,Cast Iron
• Machine Type: Automatic,Semi Automatic,Manual

EXCEL has always kept itself step in step with time. Development of new products to solve the problems of OEM customers has become a routine for SMA. Excel Block Forged Chain is an outcome of that. Developed after years of experience in manufacturing Chains for sugar mills,Excel Block Forged Chain has specific advantages. Its minimum number of moving parts reduces the wear and tear considerably giving an extra long life to the chain. It is specially engineered keeping the rugged applications of sugar mill plants in to consideration. Its precise closed die forging in carbon steel ensures compact granular structure and imparts extra strength to the chain.The same is machined to give ideal tolerance ensuring minimum friction. In all, that results in to a trouble free performance and extra long life. The major advantage offered by Block Forged Chain is minimum maintenance and high  productivity to sugar mills which leads to high profits.   Each Component A Hallmark Of Quality: Excel Block Forged Chain is made from components which are manufactured and tested with utmost care to give the best product. Some of the special features of the components are as under. Link : • Made from carbon steel to give inborn strength. • Closed die forging to achieve compact granular structure. • Precise machining to achieve ideal tolerance minimizing friction. • Appropiate heat treatment ensuring required hardness to withstand vigorous friction and wear & tear. Pin : • Made from alloy steel. • Precise machining to achieve ideal tolerance. • Suitably heat treated to impart extra strength and wear resistant property and toughness to bear impact load. Bush : • Made from alloy steel. • Precise machining to achieve ideal tolerance. • Suitably heat treated to impart extra strength to withstand vigorous friction and wear & tear  

• Material: Rubber
• Brand Name: Canon
• Usage/Application: Printing Industry
• Printer Type: Laser Printer
• Model Number: 9050

Poly v belt is the most demanded in the entire market. The shelf life of Mitsuboshi Conveyor V Belt is a brand of Japan and is reasonably long and hence it serves our users for a long period of time.