Cooling Tower Parts Dealers in Andheri, Mumbai

• Material: PVC
• Condition: New
• Warranty: 1 Years

Optic Grid Fills Is A Direct Replacement Splash Fill For Use In Counter Flow Cooling Tower Where Dirty Water Is A Concern .Optic Grid Splash Fills Is Maximizing Number Of Water Drop Lets & Highest Surface Of Water Are Passing Through Air .This Fills Are Made Of Polypropylene,(Pp) It Is Resistant To Attack From Acids, Alkalis, Muddy Water , Ash, Etc.

• Material of Construction: Rigid PVC
• Overall Dimensions: 62mm x 62mm
• Length: Length
• Shape and Size of Perforations: Diamond / Circular
• Thickness at load points: 1.2mm to 1.5mm
• Colour: Black / Grey

Perforated V-Bar is the most extensively used product in the industry. COOLDECK can supply the stainless steel or FRP coated wire mesh as well as the other components that are needed for the entire splash bar system. The water droplets spread over the solid surface and perforated holes of the splash bar. The flowing water is held on the holes due to surface tension and forms a thin film. The water film formed over these rectangular holes has very low surface tension at its corners and thus a tendency to rupture frequently. During this process of rupturing the water film is broken into small globules, thus providing maximum heat transfer. Features and Advantages Diamond shaped perforations are recommended as they offer the ideal surface tension to rupture the water droplets. The top edge of the V-bar is reinforced so as it offer bending and load strength.. Ensuring a minimum thickness of 1.5mm and a maximum distance of 600mm between adjacent bars will help reduce the possibilities of sagging. Compact locking of the V-Bar on the grid using a V-Bar clip (as depicted in the picture) will also ensure a sturdy fill structure. The overhang of the V-bar of the last grid should be restricted to 150mm. Algae resistant and Fire retardant COOLDECK's V-BAR clip design provides secure locking capabilities preventing wear on both the wire hanger and the fill. The tab locks provided on the V-bar prevent it from slipping once locked into place.

• Coating: Gpld
• Model Name: VJ2.4
• Raw Material: Brass
• Code Through Hole Type: VJ2.4/ 001
• Code Shut Off Valve Type: VJ2.4/ 001 - V
• Series: 60

Film Fills are the most efficient filling media available for cooling towers. The usage of film fills – in both counterflow and crossflow cooling towers allows relatively smaller sized towers to cool an equivalent amount of water compared to cooling towers using splash fills. This results in the saving of not only capital costs for a new tower but also reduces operational costs on account of lower height and hence lower pumping costs. Film Fills work on the principle of offering heat exchange by spreading the falling water droplets into a thin molecular film where the air can effectively contact the entire surface of the water film to carry away heat and mass.   Advantages Minimum resistance to air flow   Good distribution of water leads to turbulent mixing of air and water to maximize heat transfer.   Reduced fill height and greater cooling capacity results in lower power consumption.   Erosion and rotting resistant and long lasting (10-12 years of service time in good quality water)   Self-supporting, high strength and self-extinguishing characteristics   Resistance to weather exposure (fungii/oxidation) ; Nearly impervious to chemical degradation by Alkali, acid, grease, fats, oils and biological attack   Easy to glue at site, reduces transportation cost.

drive shafts in hot dip galvanized steel and stainless steel grades. The couplings are normally of cast iron. Cast stainless steel Grades are available upon request. The drive shafts are suitable for fans ranging from 8’ to 33’diameters . The drive shafts are tublar floating types and have flexible flanged couplings at both gear and motor ends , to compensate for any misalignment . The flexible elements are neoprene bonded metals. The length of the drive shafts are as per the cooling tower requirements. The drive shafts are dynamically balanced confirming to ISO 1946 Grade 6 prior to dispatch.

Cooltech Cooling Equipments uses high quality cooling tower spares like Rotary Sprinklers, PVC Fills, Fan Assembly and FRP Casings for Cooling towers. Cooltech is also a supplier of Cooling tower spares contact 9322274824 to order any of these spares which are available in different sizes for different capacity cooling towers.

We are offering PVC Drift Eliminators manufactured from rigid PVC and are designed to remove entrained particles from air steam efficiently, with minimum pressure drop, thereby reducing the fan power requirement when the air passes through the drift Eliminator. Water droplets are separated from the air drift at the three direction change points on the drift eliminator. For crossflow tower applications, the almost vertical water conduits provided by the SPC 100 drift eliminator remove the water droplets out of the drift eliminator area and return them back into the tower and does not allow any re-entry. The special locking pin arrangement for SPC-100 facilitates quick and simple assembly at site. When used in counter-flow cooling towers, the measurable residual liquid load behind a droplet separator characterizes its efficiency. The performance data of our droplet separators have been determined under laboratory conditions. At a face velocity (CA) of 3.5 ms and a specific water flow (rw) -22tm2 h, the residual liquid load of the air is 15mgm3. If this residual load is related to the circulating cooling water volume this equates to a value smaller than 0.001%.   Fundamental conditions required to achieve these high efficiencies in practice are, a workman like installation, the droplet separator sections must be installed without any gaps between themselves or the tower walls to ensure by passing does not take place. The face value shall not exceed the maximum permissible value at any position across the total area of the separator. Any performance testing of the separators must be carried out immediately above the separators and by using a test method consistent with that employed in our laboratory or otherwise agreed with ourselves. We can advise on the likely operating efficiencies of specific towers provided that their operating data are made available to us.       Application Areas : Primary setting in wastewater treatment plants (suspended and flocculated solids) Secondary (biological solids) setting in wastewater treatment plants Solid-liquid separation in potable and industrial process water treatment plants, Anaerobic digesters (restrict loss of solids) Ash handling units in thermal power plants Process industry (material recovery from wash storm water) Oil-water separation

• Material: Aluminium
• Country of Origin: Made In India
• Color: ALL

  Various spares available such as Fan Assembly, Sprinkler, Header, Fillings,      Motor, Structures, FRP Components, etc.   For any make, any type and any capacity

aluminum fin, F.T.L Caps & Lamp Caps, aluminum gasket, aluminum vial seals