Cooling Towers Dealers in Andheri East, Mumbai

• Material: Pultruded And Hand-Rail Frp
• Type: Cross Flow
• Capacity: 2,000,000-20,000,000 Kcal/Hr Per Cell
• Fabrication: Field-Assembled
• Air Flow: Cross Type
• Water Flow: 400 - 4,000 M3/Hr Per Cell
• Industries: Oil And Gas, Pharmaceutical, Power Plants, Refineries, Large-Scale Hvacsystems.

Induced-Draft Cooling Towers Made Of Frp. The Structure Of Our Pul. Frp Series (support Beams And Columns) Is Made Of Composite Continuous Fiberglass Pultruded Sections That Comply With Cti Std 137 And Conform To Astm E84d With A Flame Spread Rating Of Below 25. Pultruded Frp Cooling Towers Are Positioned Over A Concrete Basin. Just As Our Sgct SeriesCrossflow Towers : Low Pumping Head, Thus Lower Operational Cost. Accepts Variations In Water Flow Without Changing The Distribution System. Easy Maintenance Access To Vital Parts. Reduced Drift Loss Due To The Absence Of Water Droplets. Lower In Noise Due To Absence Of Water Noise. Larger Foot Print Of The Tower. Large Air Inlet Surface Makes Icing Difficult To Control. Tendency Of Uneven Air Distribution Through The Infill Due To The Large Inlet Surface. Customise & Tailor Made Counter Or Cross FlowCustomize & Tailor Made Tower Is Design Were We Have Less Space To Design Counter Or Cross Cooling Tower & We Are Specialized To Design For The Same : Space Availability Constrains Cooling Tower Fit In Existing Basin High Wind Velocity & High Seismic Zone Low Noise Level. To Suit Optimum Operating Economy. Features : Pultruded Fiberglass Polyester Field-Erected Cooling Towers Heavy-Duty Cooling Towers Designed For Industrial Applications Optimal Thermal Performance Design Highly Resistant To Corrosive Environments

• Flowrate: Lpm or m3/H
• Inlet/Outlet Temperature: 0C/F
• Wet Bulb Temperature: 0C/F as per the location

• Water flow rate: 200m3/hr/cell to 4000 m3/hr /cell

Manufactures & exports concrete (RCC) counterflow cooling towers using vide varieties of film and splash fills selected based upon the circulating water quality, either for fresh water or sea water application. Generally, reinforced cement concrete cooling towers are constructed as per the requirement of the customers. These towers are either offered on a turnkey basis by Canara or Civil construction can be in the customer's scope. However, detailed Engineering for RCC construction is offered by Canara. Designing and construction is done in accordance with Indian Standards (IS) or American Concrete Institute (ACI) standards.

• Voltage: 120-440 V
• Material: FRP
• Motor Power: 1 Hp
• Usage/Application: Automobile Industry
• Supply Phase: Single Phase

Along with manufacturing a wide variety of new cooling towers due to our flexible, project oriented Engineering and designs, Canara has diversified, expertise in conversion of old timber cooling towers to pulturded FRP cooling towers. Many cooling tower users prefer to repair existing old timber cooling towers, which either have out lived their life or damaged prematurely due to bad quality of materials or other reasons. In reality if the overall condition of the existing cooling tower is bad and requires a major structural repairs, then it is technically and economically advised to convert the old timber cooling tower to pulturded FRP cooling tower. During repairing of old timber cooling towers, only part of the bad quality items are replaced, so un replaced items need to be replaced after some time. Practically repairing of old timber cooling towers takes place every 1- 2 years, which proves very costly affair. Moreover partially repaired old timber cooling tower may fail, collapse partially or fully, which will be dangers in all aspects.

We are involved in offering a wide range of F.R.P. Cooling Tower to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  F.R.P. Cooling Tower. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.Features: Sturdy design Highly durable Application specific design 

Fanless Induced Draft Cooling Tower

There are 5 models under single cell specific and 18 models under multi-cell configurations. These Cooling Towers are primarily supplied in Fibreglass Reinforced Polyester (FRP). Structural design for operational load and wind pressure of 30 psf. is taken into consideration. Details provided on request for quote.

This type of Cooling towers are made from treated timber. All Structures are timber and cladded with Asbestos Corrugated Cement Sheets. The Fan Assembly is made of M.S. Hot Dip Galvanized Steel or FRP, Fan Blades are made from Aluminum Casting or FRP. Fasteners are HDG, nails are S.S.

Closed Circuit Cooling Tower, Evaporative Condensers, evaporative coolers

water cooling towers, Cooling Towers

  Available from 5 TR to 5000 TR   Round Bottle Shaped (PC Series)   Square Shaped Module (PS Series)   Modular Design with high efficiency  

Cooling Towers, FRP Spoiler, Motor Cover, PVC Pipe Lining, FRP Pipes

Cooling Tower, Fast Series Injection Moulding Machine

condensing units cooling tower, industrial package chillers

Cooling Towers

Pultruded FRP Cooling Towers, Concrete Cooling Tower

We erect new huge cooling towers on contract basis. Also carry out reparing on all types of cooling tower from 5 tr capacity to 10,000 m3/hr capacity. We deal in cooling tower made of FRP, RCC, Timber (wood).

Cooling Towers

Cooling Tower, Timber Cooling Tower