Crane Brake Dealers in Sakinaka, Mumbai

• Brand Name: SOC
• Packaging Details: As per Buyer Requirements
• Hydro Type 2: FLP 30/5
• Stroke in mm: 50-120
• Place of Origin: Maharashtra, India
• Supply Ability: 1500 Unit/Units per Month
• Port: MUMBAI
• Hydro Type: FLP 23/5

For infallible operation of machinery, modern methods are necessary, any machines which requires its motion to be controlled, whether it is lifting Crane, Hoist, Wintch or Mining Haulage today employs an Electro Magnetic Brake, enabling the operator not only to control the motion but also to hold the load at any desired point without danger of falling, merely by release of the starting handle. Electro Magnetic Brake is adequate equipment for safer operations of machinery. Electro Magnetic Brakes are used when a load must be stopped rapidly to prevent it from roatating.These brakes are used in Paper Mills, Drives of certain Textile Machines, Sugar Mill Machinery, Rubber Mixing Mills. Assembly and Function : The shoes are of cast iron and other components are of fabricated steel. The lever is hinged on main arm, which is connected to the side arm through a tie rod, and is stress by pre-loaded compression spring. The compression of spring can be adjust to set the braking torque to desired value. The brake liner of selected quality material is reveted to the shoes by aluminium rivets. A.C. solenoid with laminated magnetic sheet steel houses a copper magnetizing coil which is impregnated with class F materials. The plunger which is connected to the lever, is drawn into the coil, when it is energised with A.C. source. This loads the spring and releases the brakes shoes from brake drum. When the supply is cut off, the plunger is pull out of the coil, and spring force clamp the brake shoes on the brake drum and the brake is applied.   A.C. Drum Brakes are suitable for single phase A.C. supply up to 440V and are available for drum  diameters of 100 mm to 380 mm and braking torques up to 69 kg-m.  Features : - Compact design - Fail Safe - Reliable in operation - Clean work environment - Braking Torque can be easily adjusted - Requires less maintenance

Introduction Thruster brake is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster. Assembly and Function  A thruster shoe brake has a pair of cast iron shoes which are lined up with friction pads. The shoes are hinged on main arm and side arm of the brake, each of them have a hinge pin fitted in the base. They are connected to each other on top by a tie rod, which is hinged in the main arm and locked to the swivel block in the side arm, by a lock nut. A crank lever is hinged on the main arm and the other end is fixed to the top clevis of the thruster by a hinge pin. A brake spring is fixed on the main arm and is pre-loaded by a locknut on the lever. The pre-tension in this spring decides the braking torque. The thruster is fitted on the base by a hinge pin. When the thruster is not energized, the brake shoes are pressed on the brake drum fitted on the drive motor shaft and hold it under the effect of braking force provided by the spring. In such condition, the brake is applied and the drum cannot rotate. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted. When the first lever reaches the stop on the brake base member the brake lever at the thruster begins to move, releasing the brake drum.    Features: Rugged design Consistent braking performance Robust in construction Long life Trouble free maintenance Easy in service  

CRANETECH make Thrustor operated brakes are of 'B' class insulation and continuously rated operating on 3 phase, 415 V. A.C., 50 Hz supply.Advantages: a) Low power consumption b) Minimum maintenance c) Full thrust is maintained from start to finish of stroke. d) Switching operations 720 per hour max. Available brakes sizes from Drum dia. 100mm to 6600 mm

Thruster brake is a device to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed compression spring. The shoes press on the rotating brake drum retarding its speed, and finally stopping it. The releasing of the brake and compressing of the spring is done by thruster.

We are among the renowned Hydraulic Thruster Brake Exporters and Manufacturers from India. Our Electro Hydraulic Thruster has high level of strength and is highly durable. The Crane Electro-Hydraulic Thruster produced by us is available in various shapes and sizes. They are available in different models and are capable of delivering thrusts ranging from 10 Kg to 295 Kg. We ensure that are thrusters are duly checked before they are dispatched to the clients. Features Self-contained unit, which does not require any external components or accessoriesSelf-contained unit, which does not require any external components or accessoriesPermissible up to 720 operationsSmooth and Free linear motionLower power inputs and generated less heatFull constant thrust at all positions of working stroke

VERSATILECan be mounted in any position, simple installations.DURABLEHigh torque, durable & temperature stable friction lining. Specially processed Armature plate for wear resistance. Heavier, thick walled construction to ensure long life. Low maintenance.STABLEEpoxy resin bonded vibration proof coil. Zero backlash Armature with finger spring release. Slotted Armature for greater torque stability. Pre-loaded armature spring for residual torque free release.FASTHigh operating frequency, low inertia, fast & uniform response time.

A thruster shoe brake has a pair of cast iron shoes which are lined up with friction pads, The shoes are hinged on main arm and side arm of the brake , each of them

Electro Magnetic Brake AC And DC, FG Compact Rotary Limit Switch

ac dc brake, Dsl Shrouded Bus Bar, Indicating LED Lamp, Shrouded Bus Bar

mill duty thruster breaks, electro hydraulic thrustors

Thruster Operated Drum Brakes, thruster drum brakes, hydraulic thruster brake

Magnetic Clutch