Crane Motor Dealers in Mumbai

We are offering crane motors.

• Voltage: 220V
• Power Source: Electric
• Cerification: CE Certified
• Speed: 1000-2000rpm
• Warranty: 1 year
• Pack Type: Carton Box
• Surface Finish: Polished

The cranes are equipped with slipring or squirrel cage crane duty motors specially designed to meet the entire spectrum of crane duty applications. All these motors have high pull out torque capabilities for achieving rapid acceleration and are intended for frequent full load starts stops and reversals. Crane duty motors are one of the strategic components of the system contributing immensely to the performance of cranes over a long period.

• Brand Name: OXFORD

We are offering crane duty motors. Specification • voltage (v) : 415v+/-10%, 3 ph ac, • factor of inertia : 2 • freq (hz) : 50 hz+/-5% • cyclic duration : 25, 40, 60, 100 • insulation : f • mounting : im1001, 1002, 1003 & 1004 • starts/hour : 6/150/300 • rating (wound motor) : 1.5-240 kw • 0 ambient : 0-45°c • frame (wound motor) : 112 - 400 • ip/ic : 55/411 • over speed :2.5 times rated speed or 2000rpm whichever is less for 6 and 8 poles • terminal : • box position : on top for wound rotor motors

Crane duty motor, Ambient Temperature -10 to +50 degree C Altitude Not exceeding 1000mtrs above mean sea level. Atmosphere Non Corrosive & non Hazardous Relative Humidity Up to 100% Voltage 415V ?10%, 3 Ph. Frequency 50Hz ?5% Combined Variation 10% Duty S3,S4 & S5 (Refer KHD-50-33R2) Service factor 1.0

APPLICATION : Prabal series squirrel cage/slip ring Crane duty motors are specially designed for service on cranes and hoists. They can also be used for similar applications such as material handling equipments, and cranes of all types. These motors can serve as auxiliary motors in rolling mills or wherever intermittent duty drives are required. These are duty type rated motors developing high starting torque with low starting current. The motors are suitable for frequent starts/ stops and reversals. Also rapid acceleration is achieved by high pull out torquelrotor inertia ratio.   TYPICAL APPLICATIONS : Crane duty motors are used for following applications in majority: Cranes & hoists: long travel drive, cross travel drive, main hoist, auxiliary hoist. Material handling equipments: various conveyors Lifts Rolling mills RANGE : Manufacturing range for cast iron slip ring crane duty motors is from 112 to 400 frame. The same for squirrel cage motors in cast iron enclosure is from 80-400 & in aluminium enclosure is from 63-160. MOUNTING : Squirrel cage crane duty motors are supplied with horizontal foot- mounting. However, motors suitable for foot / flange / face mounting or any combination of these with vertical or horizontal orientation can be offered when required. Slip ring motors are normally available with foot mounting Flange mounting can be supplied on specific request.   POWER SUPPLY : Crane duty motors are suitable for 3 phase supply and can be wound for any single voltage from 220 to 650 volts and frequencies from 50 Hz or 60 Hz. The rotor voltage is committed for stator supply of 415 V, 50 HZ.For other supply conditions, Rv to be confirmed from CG. AMBIENT TEMPERATURE : The motors are rated at 45°C ambient temperature. For temperatures, other than 45°C, a deration factor has to be applied as indicated below.

Over the years, we have gained expertise in designing crane duty motor. Made utilizing sound aligned components, our crane duty motor ensures high functionality. The crane duty motor that we offer is widely acclaimed for its reliable performance and unbeatable features. Clients can avail crane duty motor in a variety of options from us. We are a well-known crane duty motor manufacturer and exporter in mumbai, maharashtra. crane duty motor is acclaimed for : corrosion and abrasion resistant high performance long evity low power consumption constant functioning

• IP Rating: IP55
• Mounting Type: B3,B5,B14 & combinations
• Number of Poles: 4,6 & 8
• Duty: S4
• Enclosure: TEFC / TENV
• Frames: 71 to 315L
• Voltage Rating: 0.18 to 200.0 kW
• Duty Cycle: S3 - S5
• Starts/hour: 60,150,300

• Voltage: 415V ± 10% or as required
• Duty cycle: S2 – S5

TEFC squirrel cage induction motors specifically designed for DOL operated Crane duty intermittent duty application. The motors are designed to take care of the high electrical and mechanical stresses arising due to frequent starts - stops associated with intermittent duty application. The motors are compact providing high output for a given frame size and have low inertia. These salient features make them most suitable for EOT Cranes.

• Frequency: 50Hz ± 5% or as required
• Altitude: up to 1000m above ms

Crane duty motors are specially designed for frequent startsstops & reversing required in cranes & lifts of all types. They can also be used in applications such as material handling, weirs & sluices, auxiliary motors in rolling mills or wherever intermittent drives are required.

Crane Duty MotorsDelphi CR series motors are compact asynchronous squirrel cage induction motors specially designed for use in cranes and hoists. The enclosures, mounting and voltage supply conditions are similar to Delphi Series EFF2 motors.These motors can be supplied with integral fail safe D.C. Brakes, with built in rectifiers. Brakes of 24 Volts for direct use with VFD drives and AC brakes are also available.

Crane Duty Motor, Revolving crane, Portable crane scale, camera crane

Specifications Voltage : 415V+-10% Frequency : 50Hz+-5% Degree of Protection : IP55 Insulation Class : F Temperature Rise : Class ‘B’ Duty : Intermittent (S3S4) Ambient Temperature : 45’C.

crane duty motors, Gear Motors, Pharmaceutical Equipment, Pump Set

Crane Duty Motor, Geared Motor, Centrifugal Pumpset, Dewatering Pump

Hoist and Crane Duty Motor, Pharmaceutical A.C. Unit Motors

Crompton Slip Ring Crane Duty Motors, Efficiency Level 1 Motors- NG Series

crane duty motors, Flame Proof Motors, Motors for cooling towers