Crusher Spare Parts Dealers in Chakala, Mumbai

We offer you the best turbine blowers and vacuum pressure turbine blowers, which are widely used in industries for different purposes. We have carved a niche for ourselves as the notable vacuum turbine blowers manufacturer and exporter from india. principle of operation : these blowers consists of a dynamically balanced impeller which revolves in a stator-cum-compression chamber having very fine clearances between them. The impeller is fitted directly on to the motor shaft. Both the suction and pressure openings are located on the outer periphery of the stator to reduce impedance to the air flow thereby developing vacuum and pressure. Since the impeller rotates with no contact between itself and the casing, there is no wear and tear and requires no lubrication applications : manufacturing of textiles, measuring, medical and laboratory equipment, printing and paper handling, vacuum packaging, waste water treatment, reprographics industry, aeration of fluids, pneumatic conveying, plastic industry, industrial ovens, vacuum cleaners, air pollution monitoring equipment. features : no lubrication is required since there is no friction and hence the air is absolutely oil free.practically nil maintenance cost.extremely compact units and can be mounted inside the machinessilencer ensures low noise level.

• Capacity: 80 M3/Hr

PRINCIPLE OF OPERATION : These blowers consists of a dynamically balanced impeller which revolves in a stator-cum-compression chamber having very fine clearances between them. The impeller is fitted directly on to the motor shaft. Both the suction and pressure openings are located on the outer periphery of the stator to reduce impedence to the air flow thereby developing vacuum and pressure. Since the impeller rotates with no contact between itself and the casing, there is no wear and tear and requires no lubrication APPLICATIONS : Manufacturing of textiles, Measuring, medical and laboratory equipment, Printing and paper handling, Vacuum packaging, Waste water treatment, Reprographics Industry, Aeration of fluids, Pneumatic Conveying, Plastic Industry, Industrial Ovens, Vacuum cleaners, Air Pollution monitoring equipment.FEATURES : • No lubrication is required since there is no friction and hence the air is absolutely oil free. • Practically nil maintenance cost. • Extremely compact units and can be mounted inside the machines • Silencer ensures low noise level

• Power:: 0.5-50 HP
• Pressure :: 2” WC to 25” WC

We are offering diverse range of frp centrifugal blowers as per clients requirement. we design frp centrifugal blowers as per client's requirement. We manufacture and supply complete frp centrifugal blower unit after testing. our impellers are dynamically balanced as per is standards. Impellers are fabricated in pp or frp. impellers are fabricated in clockwise and anti-clockwise directions as per the client's requirements. pressure : 2” wc to 25” wc types of frp centrifugal blowers are as follows : direct drive coupling drive vee belt drive.

the turbine blowers are designed in such a way that the impeller rotates with no contact with the casing. This ensures that no lubrication is required as there are no chances of wear and tear. This type of blower is used in manufacturing textiles, medical and laboratory equipment and also in printing. They cause relatively less noise and are easy to install and operate.    details : applications - manufacturing of textiles. Measuring. Medical and laboratory equipment. Printing and paper handling, vacuum packaging, waste water treaunent, fteprograhpnics lndustry, aeration of fluids. Pneumatic conveying. Plastic industry, industrial ovens. Vacuum cleaners. Air pollution monitoring equipment.   features : suction and discharge silencers : reduces noise levels to below osha standards. Make it more comfortable for emgrqyees working near the blowem. die casiimpelleri motessmootherairllowand higher volurnetricefhciency. dynamically balanced impetler : smocther operation allows vibration - free installation in oem equi men . dougie shielded shaft bearing ; better grease retention. Increased reliability.dust - proof shaft seal ; protects bearing from contaminants for lcngezr life. motor shalt - mounted impeller : eliminates the need for couplings. Its or gear. Nothing to break or wear ou .50hz. Motors. Wide voltage rarége : lvlinimizes oem inventog requirements. improved cooling fan design ; cols the motor and bicwer. Uieter running and more efhcient. thenrral protector built - in : protects the motor from ovemeatiipdg for greater reliability. compact design - space saving design makes it easier for oe s to incorporate the blower into their equipment._ k rlerriovable threaded flanges : easily replacement in oem equipment.  note - since impmvemenis are made irom time to time. Dimensions and specihcations are subject io change withcul previous notice.

We are offering exhaust air blower for removing smoke, smell, fine dust from kitchen, acid industry, chemical industry etc.

• Type: Electrical
• Color: Blue
• MOQ: As per client requirement
• Quality: Superior

With us, one can stay assured for safe deliveries as we make use of premium material for packaging the lot. Also, we make sure that the material is sourced from the trusted places only. Based in Mumbai(India), we have gained wide appreciation owing to our high quality products and client-centric approach.

We are Offering Barbecuing with Hot Air Blower. Igniting charcoal with chemicals of any kind is a laborious process, not particularly healthy and often highly dangerous. Any hot air gun does the job safely in just a few minutes with no effect on taste. Crusts baked on barbecue grills can be scraped off with ease after heating with hot air gun. http://www.hotairgun-heattool.com/hotairgun-barbecue-grills.php#barbeque

• Country of Origin: Made in India
• Size: 3/4
• Material: Stainless Steel
• Application: Pressure and Temperature Sensors, Altitude measuring in aerospace

The clients can avail an exclusive range of Polypropylene Blowers from us. The Polypropylene Blowers, we provide, are widely demanded in chemical and pharmaceutical industries. These Polypropylene Blowers get widely appreciated for their effective and smooth function bowering, efficient impellers, and corrosion resistance. Besides, the clients can buy these Polypropylene Blowers at the market leading prices from us. Applications Bulk drugsIntermediatesOrganic chemicals & platingAnodizing industries

We Manufacture Products for Pharma Sector. Fabricated sheet Metal components for Medical Equipment and Blood storage chambers are Manufactured here.

t_Eqp__Ind_Fan2_2 Laxmi Engineering core competencies lie in its design and application engineering capabilities catering to specific requirements of its clients. Laxmi Engineering proven commitment to quality and service is manifested in the high satisfaction levels expressed by its clientele over the decades.

pullman industrial fans, blowers & exhausters, owing to their high efficiency and good workmanship, are widely used by various industries like chemicals, fertilizers, pharmaceutical, plastic, food processing, steel, mining, textile, engineering, research laboratories, hospitals and hotels, wood-working unit, cement plants epic. these are available in different materials of constructions such as ms, ss and aluminum etc. Depending upon the working conditions: and are classified and are recommended on the basis of the applications, following are the types of pullman fans, blowers & exhausters. pullman centrifugal high pressure blowers applications : these are extensively used and are most suitable for pneumatic conveying systems, flotation systems, liquid agitation,air slide fans for cement plants and numerous process applications requiring high pressures as well as for delivering air blast to furnaces, boilers etc.range: capacity up to 50,000 cmh. And pressure up to 1,500-mm. W.g.construction: constructional features are similar to those of blowers and exhausters but however, the impeller is of backward curved design which is suitable for developing high pressure. pullman centrifugal medium pressure blowers applications: used for fume extraction, dust collection, pneumatic & material conveying and in various process applications.range: capacity up to 1,00,000 cmh. & pressure up to 500-mm w.g.construction:. Supplied in only (sisw) & are fabricated in heavy gauge steel sheets with adequate framing of ms angles, drilled flanges are incorporated at inlet & outlet.the impeller, depending on the type of use, could be of backward inclined or radial design, statically & dynamically balanced for minimizing vibrations, drive arrangements in which blowers & exhausters are supplied are direct drive, direct drive through coupling or v-belt drive to suit specific requirements. pullman centrifugal low pressure blowers applications: these are suitable for industrial ventilation requiring high volumetric flow rates at low pressures.range : capacity up to 5,00,000 cmh. And pressure up to 150-mm w.g.construction: fans are available either in single inlet single width ( sisw) or double inlet ( didw) type ~ fabricated in mild steel sheets and stiffened by means of ms angles, at inlet & outlet drilled flanges are incorporated for easy connection of the fan to the system. the impeller is of backward inclined design, statically and dynamically balanced and mounted on the shaft by means of cast iron hub. Drive arrangement could be direct or through v-belts depending on a specific requirement.

• Rated Power: 1 HP TO 25 HP
• Features: Easy to operate,Less power consumption,Safe to use
• Body Material: FRP
• Voltage (Volt): 230V
• Frequency (Hz): 50-60 Hz

Super Saddles are the improved version of the original saddles. They are designed to give the enhance internal gas and liquid distribution. The unique scalloped edge is the key to the product's high performance in terms of higher capacity and improved rates of mass transfer when compared to traditional plastic saddles. It also serves to overcome the problem of nesting that is commonly encountered with ordinary saddles. These saddles are available in plastic & ceramics both. Plastic Super Saddles are used where temperature are less & services is corrosive. Ceramic saddles are used where temperature required are high along with chemical attack resistance these saddles are offered with a glazed construction to enhance the capacity and reduce porosity

We are offering ptfe bellows. Ptfe is resistant to virtually all chemicals, even at very high temperatures and pressures. It is only affected under certain conditions by elementary fluorine, strong fluorinating agents like and molten alkali metals.

PTFE Bellows are used as compensating elements between engineered machined components. It is compensating or protecting elements in chemical ,food and medical appliances. They are also used to compensate for thermal expansion especially in pipelines. Depending on different designs and different wall thickness of the convolution elements, bellows can offer either high flexibility or high compressive strength. External and internal Pressure, number of runs and all -closed/ all-open lengths are the critical factors to consider in designing a bellow. Given years of experiences and successes in this niche field, our technical department is ready to partner with engineers to find the best solutions. APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & Construction Equipment

Air Knife Systems utilize compressed air for industrial blow off and cooling applications. Used extensively for replacing rows of nozzles or jets or drilled pipe to reduce energy. The curtain like airflow of the Air Knife is an efficient way to dry, clean, and cool. Applications includes the removal of excess oils, liquids, and dust. The Air Knife is used in printing, labeling and packaging, and used in part or component cooling, Industries include: Converting and Packaging, Films and Laminating, Form and Fill, Sheet and Web Materials of all types from film to metals, Bag opening/fill operations, Conveying or hold down, Food Processing, Paint preparation and drying. APPLICATIONS Part drying after wash Sheet cleaning in strip mills Conveyor cleaning Part or component cooling Web drying or cleaning Environmental separation Pre-paint blowoff Bag opening/filling operations Scrap removal on converting operations ADVANTAGES Quiet - 69 dBA for most applications 40:1 air amplification Uniform airflow across entire length Variable force and flow No moving parts - maintenance free Easy mounting Compact, rugged, easy to install Stainless steel screws in all models

Expansion Bellows are formed with a thickness up to 50mm with a size ranging from 300mm ID to 5200mm ID. Some of the distinct job sizes are enlisted below : •  1940mm OD x 1442mm ID x 32mm Thk – SA 516 Gr. 70 Material •  1136mm OD x 616mm ID x 32mm Thk – SA 516 Gr. 70 Material •  1306mm OD x 886mm ID x 28mm Thk – SA 516 Gr. 70 Material Application •  Pressure Vessels •  Heat Exchanger Scope of Work •  Manufacturing on Job work basis (FIM) •  Cold/Hot forming by progressive pressing OR Single stroke Die- punch •  Heat Treatments (Intermediate/Final Stage) •  Edge Beveling •  NDT (after forming) : DPT, RT, MPI, UT

• Impeller Diam.: 190 to 225 mm
• Input Voltage: 110, 220, 440 V AC (50 & 60 Hz.)

These Fans use Backward Curved Impellers made of Steel or Engineering Plastics. The impellers are press fitted on the External Rotor Motor and dynamically Balanced in two planes. Backward Curved Fans can be used with or without scroll Housing, and find its application in sucking operations, and where static required at Fan Inlet is high.

• Pressure ratings for sizes: 1" to 3" is 6kg/cm2 and full vacuum.

Anyone can insert the location ring to bring the bellow in center. this way the life of bellow increases and unnecessary ruptures can be avoided. Our deep knowledge in mechanical seal has helped us to evolve this design.We design bellows in Teflon and SS-316 for mechanical seal and we have learnt the things hard way.

Ex-pansion Bellows are formed with a thickness up to 50 mm with a size ranging from 300 mm ID to 5200 mm ID.Some of the distinct job sizes are enlisted below : 1940 mm OD x 1442 mm ID x 32 mm Thk – SA 516 Gr. 70 Material 1136 mm OD x 616 mm ID x 32 mm Thk – SA 516 Gr. 70 Material 1306 mm OD x 886 mm ID x 28 mm Thk – SA 516 Gr. 70 Material Application: Pressure Vessels Heat Exchanger Scope of Work: Manufacturing on Job work basis (FIM) Cold/Hot forming by progressive pressing OR Single stroke Die- punch Heat Treatments (Intermediate/Final Stage) Edge Beveling

• Features: Long service life, Accurate dimensions, Sturdy construction
• Continuous rating Input: 500W
• No load speed (rpm): 8,500-16,000
• Air volume: 1.3-2.4m³/min
• Dimensions (L x W x H): 428x163x212mm (16-7/8"x6-3/8"x8-3/8")
• Net Weight: 1.3kg (2.8lbs)

• Minimum Order Quantity: 500 Pieces
• Production Capacity: 10000 Pieces
• Delivery Time: 15 days

Assisted by the team of our professionals, we are engaged in offering a quality range of Rubber Bellows, which can be molded, expanded and collapsed. Owing to this flexibility, these bellows help in protecting the component from the foreign particles. Manufactured using high grade raw material, which is procured from the certified vendors of the market, these gear-lever bellows are widely used in applications related to commercial vehicles. Available in different shapes, lengths and sizes, our clients can avail these bellows as per their own specific requirements. Due to their capacity to withstand considerable heat and wall thickness, these bellows are better than any other common bellows available in the market.  Other Information

• Color: Silver
• Voltage: 220 V
• Country of Origin: Made in India
• Power Source: Electricity
• Brand: CTK
• Material: Stainless Steel
• Automation Grade: Automatic
• Frequency: 50 Hz

The Valstat® ionising air knife neutralises static charges and removes dust as parts proceed into the process area by providing an anti-static blanket of high velocity air. This assures quality and minimises rejection rates. Typical examples include automated paint or process lines.

With the assistance of our capacious warehouse, we are able to meet the bulk as well as urgent requirements of the buyers. Our unit is supervised by the experts ensuring complete safety of the lot. Based is Mumbai(India), we are entrusted with the chore of providing top-notch products in the domestic market.

Hollow axial aerodynamic composite blade design - for high strength to weight ratio.Periodic checks & maintenance done on mould - for reliable aerodynamic profile of the blade.Snout shape aluminium tip design, to reduce noise and air turbulence, and increase generation output.

Our organization has gained vast expertise in offering a superior range of PTFE (Poly tetra fluoro ethylene) Coating on SS (Stainless Steel) Bellows that are manufactured with superior quality stainless steel materials that are procured from reputed vendors across the globe with zero defects.

• Feature: Silencer ensures low noise, Practically nil maintenance cost etc.

These blowers consist of a dynamically balanced impeller, which revolves in as stator-cum compression chamber having very fine clearances between them. The impeller is fitted directly on to the motor. Both the suction and pressure openings are located on the outer periphery of the stator to reduce impedence to the air flow thereby developing vacuum and pressure.