Current Limiting and Changeover Devices Dealers in Sakinaka, Mumbai

he design of imax switch type FS is based on the innovative : 'QUAD BREAK' principle. This design enables a drastic reduction in the intensity of arc, which is produced at the time of breaking. During breaking the current path is broken at four places in series, thus the arc is reduced. This leads to less strain on the contacts and the life of the switch is increased. The moving contacts are designed to make two parallel current paths, which produce high electro-magnetic attraction forces during high faults and increase the contact pressure, this eliminates chance of arcing at the contacts and allow the fuse to safely clear the fault. The self-cleaning contacts ensure wip

Changeover switches provide uninterrupted alternate supply to essential equipment in the event of failure of normal supply. They are designed to feed the load from one of the two incoming sources, depending upon supply status and mode selected. We offer Auto as well as Manual Changeover Switches.

• Type: Photoelectric lighting controller
• Application: indoors and outdoors
• European Article Number (EAN): 4007841550714
• Dimensions(h x w x d): 95 x 95 x 65 mm
• Voltage: 230 - 240 V / 50 Hz (2.5 mm² max.)
• Installation: Wall
• Max. switching current (resistive load): 2000 A
• max. output (uncorrected, inductive, cos φ = 0.5, e.g. fluorescent lamps): 1000 W
• max. output (series-corrected): 900 W
• max. output (parallel corrected, with C ≤ 45.6 µF): 500 W
• Output: 8 ea. max., C ? 176 µF
• Response brightness: 0.5-100 lx
• Night economy mode: variable night 'OFF' time
• Morning setting: Light 'ON' or 'OFF'
• IP rating: IP54
• Protection class: II
• Temperature range: -20- 50
• Version: Black

We bring to you Automatic Light ON OFF Switch that can turn the lights on staircase, garden, factory, bungalows, hotels, streetlights automatically. This system is designed to be fully adjustable according to the amount of darkness. Automatic Light ON OFF Switch not only saves electricity, but also saves precious time and is therefore cost effective. These systems are being widely used in co-operative society, bungalows, hospitals, hotels, factories, residential colonies. Some of the problems that can be solved with our Automatic Light ON OFF Switch are : Lights remain switched on in places like gardens and staircases when not needed. They can be automatically turned off. Wastage of electricity, which reflects in the bill   Make Yourself Tension Free With Automatic Light ON OFF Switch :Now Microtech Engineering comes to you with the solution for lighting related problems and introduces AUTO LIGHT ON/OFF. Just put this unit on and forget about problems as it has several benefits, including : With wide range of set-up, multi functional systems are available This controller is cost effective in all ways Fully adjustable according to darkness  Some of the advantages of using Automatic Light ON OFF Switch are : Saves precious electricity Saves time Fully automatic Very sleek & compact Cost effective Electrical Details : Input 230v AC +/- 10% 50Hz Our unit is suitable for any single phase/three phase of Any HP rating

• Material: Brass
• Usage/Application: Water Line
• Switching Current: 1.2 Amp
• Operating Pressure: 10 kg/cm2
• Flow Media Type: Liquid
• Ambient Temperature: Max 100 Degree
• Wire Length: water nozzel 6mm/8mm/10mm
• I Deal In: New Only
• Color: golden
• Packaging Type: Box

• Feature: 19" Rack mounting with less than 4U height. (Additional brackets are supplied for Relay Rack mounting,System operates with N+2 wires,Continuously monitors the status of both Main and Spare fuse Etc.

Fuse Auto Changeover System is designed for continuous monitoring of various fuses provided in Railway signaling installations. In addition to monitor the fuses, the system also provide automatic changeover of circuit to spare fuse in the event of Main fuse failure. While monitoring and changing over to spare fuse, the system also provide audiovisual indications for failure of the fuse. The system is also provided with potential free contacts for taking remote indication.

The Series BYDS Bypass Damper Switch is designed to control motorized bypass dampers. As individual zone dampers open and close, the system static pressure will rise and fall. In order to maintain proper airflow and static pressure through the HVAC system, a bypass system incorporating a floating type motorized damper and a static pressure control should be incorporated. A typical onoff pressure switch cannot operate in this application due to the high cycle rate that would result, eventually causing contact burnout. The BYDS static pressure control is equipped with a solid-state switching and timing circuit to enhance operation and improve long-term reliability in this demanding application. CONTROL OPERATION The BYDS Bypass Damper Switch is designed for use with a three wire floating point damper actuator used to control the static pressure on zone control systems requiring motorized bypass dampers. A bypass damper, bypasses air from the discharge air side of the HVAC unit back in the return air side. The air flow is modulated in order to maintain a constant static pressure in the system as individual zone dampers open and close. The static pressure control is equipped with solid-state switching which dramatically increases the life of the control. On an increase in static pressure the BYDS will send 24 volts out and start the actuator to drive open. When the static pressure reaches set-point the actuator will stop. After a ten second delay the actuator will start to drive the damper closed if there has not been an increase in static pressure. A green LED indicates when the damper is in the open position or being driven open. A 24 VAC transformer is required to power the BYDS control and damper actuator. The unit includes tubing and two static pressure probes.

Residual Current Monitor, insulation fault location system

Change Over Switch, MCCB Switches, MCCB Switches, Mcb, Coils

current monitor, relay test kit, Hiv Test Kit, Plating Rectifiers

Low Pressure Auto Changeover, Gas Purification Panels, helium pycnometer

Main Switches, Changeover Switches, low voltage switch gears

Change Over Switches, protective relays, Heat Shrinkable Cable Terminal

Streaming Current Monitor, bi-mwa light scattering detectors