Cutting Machine Parts Dealers in Andheri East, Mumbai

• Machines: Circular saws,portable machines.
• Features: ATB 15° tooth with positive cutting angle.
• Material: Soft and hard wood, unprocessed chipboard and plywood.

• Surface Finishing: Coated
• Color: Black, Shiny-silver
• Application: Cutting
• Grade: AISI
• Thickness: 3 To 5 Inch

Carbide being high wear resistence has applications in wide range of products , carbide cleaner blades are blades used in mining industry on conveyor belt and can be produced as per the requirement.

• Type: Drill Bits
• Material: Steel
• Usage: Drilling
• Thickness: 80-100mm
• Certification: ISO 9001:2008
• Length: 20-25cm
• Weight: 70-80gm
• Color: Grey
• Surface Finishing: Coated
• Specialities: Accuracy, Easy Fitting, Heat Resistance, Titanium Coated
• Brand Name: Rockwell

• Material: M2 M35 & M42
• Model Number: NA
• Brand Name: Malkar
• Place of Origin: Mumbai
• Accuracy: AA, A & B as per DIN3968
• Pitch: 0.5 to 25 mm

We are engaged in providing worm wheel hobs to the customers. The worm wheel hobs are manufactured using single or multi start in the bulk quantity. Our sophisticated manufacturing unit enables us to produce worm wheel hobs that are in sync with the international standards. Our manufacturing unit is equipped with 20 nos of gear hobbing machines which enables us to produce any standard or non standard profile milled or ground worm wheel hobs. attributes efficientdurableeasy to install processes used worm hobbingthread millingthread whirlingthread rollingthread grinding specificationsdiameter : upto 400 diametermodule : 0.2 module to 6 moduleprofile : ground & ungrounded

• Type: Plasma Cutting Nozzle
• Material: Copper
• Diameter: 20mm
• Application: Plasma Cutting Use
• Color: Metalic
• Feature: Fine Finished
• Condition: New
• Finishing: Polished
• Pressure: High
• Country of Origin: India
• Brand Name: Athania Industries

• Size: Small, Medium, Large
• Blade Material: Aluminum

The Raw Material I.E. Frp And Aluminium Provides The Desired Non-Corrosive Quality To The Fan Blades, Resulting In The Operation Of Fans Even In The Chemical Environment. Frp Is Lightweight Material Which Ensures Low Moment Of Inertia, Minimum Wear & Tear Of Motor, Bearing And Drive System.Detail : The Basic Purpose Of Fan Is To Move A Mass Of Gas Or Vapor At The Desired Velocity. For Achieving This Objective, There Is Slight Increase In The Gas Pressure Across The Fan Impeller. Sgct Manufacture Fans With Fan Blade Choice Of Correct Twist And Of Special Airfoil Sections To Reduce Compressibility Losses.

Seller Type:Manufacturer Location:All india delivery Dimensions (L x W x H):0.00 x 0.00 x 0.00 cm Weight:0.00 g Product Code: 1531825479

At GEFI, improving the razor blade is our passion—sometimes we’re evolving it and sometimes we’re revolutionizing it. The best blades that we produce today will provide up to smooth and soft shaving experiences. Quality razor blades are really hard to make, and historically a couple of major brands have controlled almost all of the world’s razor blade factories. They’ve used that position to earn huge profits by selling razor blades at really high prices. That changes today. GEFI is now the only brand in the world that makes blades and sells them directly to you. And we’re committed to selling you our blades for a fair price, so you can get the great shave you deserve without ever overpaying again. Our expertise team has been grinding high-grade steel into some of the world’s sharpest blades. Today, best of our engineers, designers, craftsmen, and production workers build and operate sophisticated, custom equipment that produces millions of precision blades per month. We’re excited to partner with our new team to innovate and continue to make the fine blades you deserve. Our blades will get even better. Your shave will get even better. We’ll listen to your feedback about what makes a great shave and create products that deliver you that experience. In the end, we hope you’ll enjoy shaving even more.IMPORTANT INFORMATION Wake your skin up 1. Avoid shaving as soon as you wake up in the morning. By giving your skin time to “wake up,” you’ll allow it to lose the "puffiness" that happens due to fluid accumulation during the night, allowing you to get a closer shave. 2. Before you shave, make sure to wet the shaving area with warm or hot water. This will cause your hair shaft to swell, allowing the blade to cut your hair and not your skin, preventing infections in case of nicks. 3. You may want to exfoliate using a cleanser or scrub to eradicate dead skin cells. This will better prepare your skin for shaving. Soften your Beard 1. Soak a facecloth in warm water and hold it to your face for 30 seconds. This will help soften and loosen the hair and skin. Lather your Face 1. Put a ball of shaving cream on your palm and apply it evenly over your beard and neck in upward circular motions. Thoroughly massage shaving cream into your stubble. Make sure to uniformly cover all areas of your face that you wish to shave. 2. Try and use a vitamin and Aloe Vera-based cream as this will protect your face from razor rashes and burns while providing you with a close, soothing shave. Choose your Blade 1. Always use a sharp blade to avoid cuts; a dull blade drags instead of slides over your face and catches your skin along with your beard. Rinse the blade in hot water as often as possible. Don’t hurry, use slow short strokes. Just Shave 1. Shave in the direction that your hair grows on your face. This will eliminate redness, rashes, razor burn and ingrown hairs. 2. The top section of your beard: Shave from the top of the beard to the edge of your jaw-line in long, even strokes. 3. Your neck and chin: Shave from the bottom of your neck upwards (with the grain) to prevent razor burn and ingrown hairs. 4. Getting a closer shave: Try pulling your skin taut with your free hand while shaving. 5. Your upper lip: Stretch it over your front teeth to tighten the skin and remember to shave downwards. 6. Rinse your razor after each stroke to keep it from becoming clogged with hair. Take a closer look Wash off excess shaving cream with warm water, and look for sections you may have missed. Wet your razor to shave these remaining sections. Moisturize 1. After shaving, use a toner (preferably containing vitamins, aloe extract, etc.) or after-shave. You could also try an oil-free moisturizer to soothe and protect your face after shaving. 2. If an after-shave lotion is what you use, check the label for alcohol content. Please note that dryness and stinging sensations are caused by most after-shave products that have alcohol as its primary ingredient. Although it may feel good initially, it could turn out to be a minor irritant later.

• Material: Copper
• Torch Type: Cutting torch
• Fuel Gas Type: Oxy-Acetylene
• Use: Acetylene fuel gas

Enchanting our customers with our excellent performance, we have cemented our status as a top figure in the industry. As a Manufacturer, Supplier and Exporter, we proudly present Carbon Steel Surgical Blades to our customers. These are developed using the finest material and latest techniques in fulfillment with international standards. Our valuable customers can easily avail them from us in a given time frame at industry leading rates.

• Jewelry Type: Bracelets, Bangles
• Occasion: Anniversary, Engagement, Gift, Party, Wedding
• Diamond Shape: white-diamond
• Color: White
• Brand Name: Store Indya
• Main Stone: Diamond
• Material: 925 Sterling Silver
• Packaging Details: Packing as per buyer's specification will be chargeable accordingly. Delivery Detail 30-45 Days after order and payment is confirmed.
• Jewelry Main Material: Silver
• Material Type: 925 Sterling silver
• Port: Mumbai

Mech-Tech Tools is a renowned company in the field of cutting tools based at Faridabad (Haryana), India from 1998 Onwards. At Mech-Tech Tools, we aim to be your partner in offering one-stop solutions for all your machining problems. In our extensive range of products you will always find the tool you are looking for to meet your operational needs

Bimetal Hole Saws are toothed HSS strips laser welded to a tough alloy body and disc. These precision manufactured Hole Saws that have outstanding strength, resilience and shatter resistance are manufactured in Bimetal M3 & 8% Cobalt grades.

We are offering lathe tools for watch industry.

• Brand Name: Medtronic
• Diameter: 4, 3.5 and 2.9 mm
• Length: 11 cm
• Design: Zero degree angle
• Operating speed: 5000 rpm, oscillate

• Wt :: 6 gms.
• Blade Material: HSS (M2 grade).

Double ended Deburring blade for single or 2-edge deburring of Sheets Ribs. Deburrs both edges of sheetrib of upto 4 mm. thick from one side Single edge deburring from other side .Triangular 3 mm. A/F Scraper of 75 mm. length.Pack Qty. : 1

The diamond Segmented Gang Saw Blades that We Manufacture are Used for Slabbing Marble, Sandstone, Limestone, Etc. the Blanks are Fabricated Made from 2% Nickel Alloy Steel. Furthermore, the Diamond Segmented Gang Saw Blades are Manufactured By Heat Treatment, Skilful Straightening & Tensioning with the Use if Advanced Technologies. acclaimed for : high Productivityexcellent Parallel and Straight Cutsconsistent Performanceperfect Sawn Finishlonger Service Life available in : sizes :gang Saws -180 Mm Width X 2.5 / 3.0 / 3.5mm Thickness X Desired Lengthsegments :20 Mm Length X 3.5 / 4.0 / 4.5 / 5.0 Mm Width X 10 Mm Heightbox Typeconical Shaped

• Country of Origin: Made in India
• Surface Finishing: Polished
• Tolerance: 0.01 mm
• HRC: 60 HRC
• Corrosion Resistance: Yes

We are offering countersink tools. Cs - short (62050) short length holder for 2-flute countersinks pack qty : 1 wt : 6 gms.