Daybreak Andheri East, Mumbai, Maharashtra

General chemical applications, oil refining and petrochemical, Pharmaceutical industries. Suitable for use with abrasive clear and corrosive fluids and for cryogenic and high temperature applications. By choosing suitable component material the seals can be adapted to operate with a wide range of liquid and operating conditions.

Anyone can insert the location ring to bring the bellow in center. this way the life of bellow increases and unnecessary ruptures can be avoided. Our deep knowledge in mechanical seal has helped us to evolve this design.We design bellows in Teflon and SS-316 for mechanical seal and we have learnt the things hard way.

Suitable for use with abrasive contaminated and corrosive fluids and for Slurries, sewage water, viscous liquids. By choosing suitable component material the seals can be adapted to operate with a wide range of liquid and operating conditions.

CORR-RES GRATE steel reinforced injection molded PP grating is a strong mesh grating panel supported by specialized steel bars. The CORR-RES grating offers 100% resistance to corrosion & chemical attack. The support steel bars are totally insulated from corrosion by providing PP cover. CORR-RES GRATE has many advantages as the panels are expandable to any shape and size. The panels feature a concave non-slip walking surface.

Type DB CT-100 is a compact cartridge balanced seal specially developed for handling slurries, sludge, thick syrups and polymerising fluids. In the cartridge construction the springs are isolated from the fluid enhancing the seal life. After detaching of the location plates provided, the seal can be easily installed straight away without setting measurements. Type CT-100 is a study, robust, seal capable of maintenance free runs for

The function of this arrangement is to prevent the slurry entering into the rotor chamber. This also lubricates the bearings. An auxiliary impeller located at fore end of the rotor circulates the flushing fluid through an integral heat exchanger to minimize frictional and electrical loss. The back flushing arrangement enables the pump to operate in process fluids with solid continent up to 5%.The back flush should be started at least one minute before switching on the pump and should be allowed to continue for a minute after shutting down the pump.

Pressure : atmospheric to 15 kg/cm2

General chemical applications, oil refining and petrochemical, Pharmaceutical industries. Suitable for use with abrasive contaminated and corrosive fluids, for slurries, sludges and effluents with solid presence. By choosing suitable component material the seals can be adapted to operate with a wide range of liquid and operating conditions.

Temperature : -50c° to + 500 c°/-60 F° to 930 F° depending on the material used.

Pressure : Type DB-FU-Up to 17 bar g/247 psig, Type DB-FB Up to 62 bar g/900 psig.

Rotary Airlock Valve (RAV) is the equipment which is fitted below the Bag Filter, Cyclone, and Multicyclone etc. The main function of the RAV is to lock the air and discharge the dust powder.

Suitable for use with abrasive clear and corrosive fluids and for cryogenic and high temperature applications. By choosing suitable component material the seals can be adapted to operate with a wide range of liquid and operating conditions.

Temperature : -50c° to + 500c°/-60 F° to 930 F° depending on the material used

Pressure : Up to 52 bar g/750 psig

Speed : Up to 6000 RPM according to seal size and working pressure

Type HR reverse circulation pumps are designed for fluids & chemicals with relatively high vapour pressure, low specific gravity, low specific heat liquids. Liquids with steep vapor pressure curves may vaporize on picking up the motor heat and result in cavitations conditions The circulationpumping fluid is passed from the casing volute chamber into the rotor chamber through the front bearing housing. After being extracted from the outlet of rear bearing housing, the liquid is returned to vapor zone in the suction tank, through the reverse circulation line.

Pressure : atmospheric to 15 kg/cm2

Pumps Are Recommended For Excellent for scrubbing corrosive and aggressive gases like CI2, Br2, I2, SO2, SO3, CO3, etc. Used in transfer of chemical in batch process. Recommended for use against filter press in dyes and intermediate industries. For recirculation of chemicals in electroplating industries.

Special designed and developed for high capacity and high head application. Transfer ACID ALKALI Effluent at higher head & High flow rate. SpeedThis pump can operate at 1440 RPM as well as 2880 RPM.

We can offer wide range of Centrifugal Pumps that can handle a wide spectrum of Corrosive Chemicals, starting from Strongly Oxidizing solutions to Strongly Reducing ones, at various temperatures and concentration, used in various types of Process Industries.

Type : Centrifugal

Certification : CE Certified

Voltage : 220V

Operating Type : Semi Automatic

Power : 1-3kw

Driven Type : Electric

Warranty : 1 Year

The term pressure vessel refers to vessels operating above the atmospheric pressure, or subject to external pressure. A pressure vessel is a vessel containing a fluid which has a pressure that is higher than outside.

A universal stirrer for 20 to 210 LTR. Drums with small bung hole. Easy to rapid. Ideal for stirring up suspensions and mixing in additives. It is possible in a matter of seconds to fit the drum mounting on to even deformed screw cap drums, to insert the stirrer shaft through the bunghole, center it and secure it in position. Pneumatic drum agitators are distinguished by their functional design, ease of handling and robust construction. The powerful air motor permits stirring of dye stuffs, solvents, and even viscous media effortlessly without constant attention of an operator.

Polypropylene pumps, Design Special designed and developed for high capacity and high head applicationTransfer ACID ALKALI Effluent at higher head & High flow rate.SpeedThis pump can operate at 1440 RPM as well as 2880 RPM

Transfer ACID ALKALI Effluent at higher head & High flow rate. SpeedThis pump can operate at 1440 RPM as well as 2880 RPM, ACID effluent transfer for large scale industries. Scrubbing acidic fumes in steel industries.

General chemical applications, oil refining and petrochemical, Pharmaceutical industries. Suitable for use with abrasive clear and corrosive fluids and for cryogenic and high temperature applications. By choosing suitable component material the seals can be adapted to operate with a wide range of liquid and operating conditions.

Pressure : Type DB-MU-Up to 17 bar g/247 psig, Type DB-MB Up to 62 bar g/900 psig

Temperature : -50c° to + 500 c°/-60 F° to 930 F° depending on the material used

330 ml capacity for every down stroke. Excellent for transfer of acids, alkalis and other corrosive chemicals form barrels and jerry cans. Self-priming with trlescopic suction pipe to suit 100 LTR. To 210 LTR. Drum. Dual htreading for steeel and plastic drums. Economical light weight and durable. Easy to dismantle, clean and reassemble.

For use with high temperature oils, chemicals, Petrochemicals and refinery processing DIN 24960 and ANSI B73 pump applications, Suitable for process services requiring corrosion resistance, By choosing suitable component material the seals can be adapted to operate with a wide range of liquid and operating conditions.

Temperature : -75c° to + 430c°/-100 F° to 800 F° depending on the material used

Pressure : 35 bar g/500 psig

Speed : Up to 3000 RPM according to seal size and working pressure

Type db-ags-100ct are preset factory assembled cartridge seals for use in agitators, mixers and reactor vessels. The seal construction varies slightly for top entry vessels, side entry vessels and bottom entry vessels. The seals are designed to the shortest shaft length and the bearings are located as close to the vessel body to minimize the deflection.

Standard Pumps fitted with Ceramic Sleeve and Teflon Bellow Mechanical Seals. Excellent for handling corrosive chemicals like HCL, dil H2SO4, NaOH, HNO3, H3PO4, NaCI etc.

Suitable for use with abrasive contaminated and corrosive fluids, for slurries, sludge and effluents with solid presence, By choosing suitable component material the seals can be adapted to operate with a wide range of liquid and operating conditions.