DC Energy Meter Dealers in Mumbai

DC Energy meters are panel mount instruments which show the voltage, current and the resistance in the circuit online. These instruments are useful in test and measurement applications where resistance measurement is of importance.High low limits programming with relay output is optional for testing conditions where Go NOGO indication is of importance.

DESCRIPTION:- DC energy measurement is based on the principle of integration of DC power with time incorporating state of art microcontroller based design FEATURES:- Programmable & password protected for the tampering protection. To widen the usage, different shunt ratio can be programmed directly through switch Programmable shunt ratio Programmable device ID and selectable baudrate. EEPROM based memory for energy data retention. RS 485 Modbus communication Measure DC energy of four channels simultaneously. Energy displayed on 16 X 2 Alphanumeric character LCD display with backlit.

• Features: Voltage, current and resistance display. Panel mount. Optional high / low alarm values programmable with relay output. Optional RS232 / RS485 / Ethernet Modbus interface.
• Display: 16×2 LCD display or 4 digit LED display
• DC Input voltage range: 75 mV
• Size : 96×96 mm
• Auxiliary supply: 110-230 V AC or 12/24/48/110 V DC
• DC shunt input range: 75 mV

ELMEASURE MODEL NOS. : EDC 4100 ,EDC 1100   Salient Features : • Single meter measures multiple channels • Differential current input for all the current channels • Programmable shunt secondary 50mV to 75mV   • Current full scale programmable independently   Applications : • DC Measurement • Equipment Monitoring   • Genset, Solar and UPS applications • In control panel to measure different electrical loads

• Panel mount unit size: 96×96 mm

DC Energy meters are panel mount instruments which show the voltage, current and the resistance in the circuit online. These instruments are useful in test and measurement applications where resistance measurement is of importance.High low limits programming with relay output is optional for testing conditions where Go NOGO indication is of importance.

The dc Energy Meter provided By Us is Used for Measuring Electrical Energy Consumed By Multiple Loads that are Connected to D.c. Voltage Source. Furthermore, the Dc Energy Meter is Ideal for Measuring the Drop of Voltage Across Current Shunt, Input Voltage and Observing Current, Voltage, Kw & Kwh with the Usage of Push Button Switches. features 7 Digit Lcd Display of Kwhuser Selectable Shunt Ratingreset of Kwh for Every Channel Protected By Passwordindividual Channel Can Be Enabled or Disabledshunt Can Be Placed Either in +ve or -ve Side of the Dc Power Sourceenergy Values & Settings Retained After Power Failureremote Monitoring of Parametersdisplay of Dc Current, Voltage, Power (kw) & Kwhr for 7 Channelssoft Calibration – No Trimpotsoptional Real Time Clockoperates from Battery Being Monitored (optionally It Can Be Operated from a Different Auxiliary Power Supply)optional- Rs 485 Modbus Link for Pc Connectivitydata On Modbus Protocol Can Be in “integer” Format or Ieee 754user Friendly Lcd Display Messages technical Specifications electrical input Voltage : nominal Voltage Range12v (10 to 19v), 24v (20 to 38v)48v (40 to 76v), 96v (80 to 152v)110v (90 To175v), 220v (180 to 350v)input Current : nominal Shunt Value 75mv (50 to 100)operating Range 5mv to 100mvauxiliary Supply : same as Input Voltage or Optionally Any Voltage Noted in the Voltage Range Abovemeasurement : 7 Channel Dc Kwhraccuracy : +/- 1% (10 % to 120 % of Range)resolution : 0.1 Kwhrindication display : 16 X 2 Character Backlit Lcd Character Size 2.95 X 4.35mmdisplay Parameter (four Channels)kwhr -xxxxxx.xcurrent- Xxx.xpower ( Kw) -xx.xvoltage -xx.xconfigurable Parametersshunt Rating- 75 Mv = 10 to 1000 Ampbaud Rate -9600 to 19200device/ Unit Address -01 to 255calibration for Each Channel and Reset of Energy Count Provided with Password Protectionprotection : Reverse Input Polarity Protectionisolation between Aux-supply and Electronics: 500 V Dc for 1minbetween Current (shunt) and Input Dc Potential: 500 V C for 1 Mincommunication rs 485 2 Wire Communicationprotocol Modbus Rtu Integer, or Ieee 754baud Rate : Settable Either 9600 or 19200address : Settable 01 to 255data Retention: Energy Values and Settings Retained After Power Failurecalibration: Soft Calibration Through Softwarereal Time Clock (rtc) : Optionalpower Consumption : < 2 Wattsecurity password for Editing of Settingspassword for Calibrationenvironmental normal Operating Conditions. Temperature: Operating Temperature: 10 C to 55 C relative Humidity: 55% to 85%.dimensions housing : Plastic or Metal Housing 96 X 96 X 65 Mm (cut Out 92 X 92 Mm)

Dc Energy Meter, Electronic Instruments, Measuring Instruments, Power Supply

Dc Energy Meter, Voltage Monitoring System

Dc Energy Meter, Analogue Panel Voltmeters