Direct Current (DC) Motor Dealers in Sakinaka, Mumbai

• Voltage: 50 / 60 Hz. Single & Three Phase
• Rotor Diameters: OD : 92 & 110 mm
• Shaft Extensions: To suit customer requirements
• Speed: 1400 & 2800 RPM
• Power Output: 92 mm : 20 to 150 Watts 110 mm : 150 to 300 Watts

Like any other conventional Motor, the External Rotor Motor has a wound Stator and an Aluminum Die Cast Rotor. The only difference is that in this case the Rotor moves externally around the stator.       CE Mark and manufactured to EN 60335-1 Compact in size Continuous Rating with High Efficiency Variable Speed by changing Input Voltage or Frequency Dynamically Balanced in 2 planes as per grade 2.5 of ISO 1940-1973 in accordance to VDI 2060 Winding Surge and H.V. Tested Double Shielded pre lubricated Ball Bearings Low Noise   Motors Range From : 

  High Vacuum, High Temperature Steppers Motors Stepper motors for vacuum applications up to 10-11 hPa Temperature range from -270 to +300oC Holding torques from 3.4 mNm to 9.9 Nm Diameters 19 to 125 mm Special design for clean room or space applications Optional: gears, couplings, 2nd shaft, temperature sensor, etc.,  

We are an ISO certified Manufacturer and Supplier of Direct Current Wiper Motor. Innovation is the factor which drives us to established benchmarks of brilliance in the engineering sector. Our Direct Current Wiper Motor is widely appreciated for being perfectly designed and efficient performance.Applications : Industrial Use DC motor for servo stabilizer Features : Single Speed motor with output shaft Adhesive fixed high energy magnets With Reset able fuse (poly switch) or Thermal Cutout Capacitor as per requirement

• Application: Tube Filling Machines. Ointment, Colour, Gel Filling Machines
• Inputs: Start signal to run the stepper motor(PNP/NPN), Mark sensor (PNP/NPN), Stepper Speed Adjustment
• Outputs: PWM Current Control, Programmable outputs (if required)
• Motors: Upto 4 Amps Stepper Motor

Controls motion of Stepper motor and precisely positions the tube for sealing. The controller starts on receiving start signal and runs the stepper till the mark sensor senses the mark on the tube. Speed of the motor can be adjusted as per user's requirement.

• Type: Hybrid Stepper Motor
• Certification: ISO 9001:2008
• Application: Elecronic Use

The various types are Nema23 stepper motor, nema24 stepper motor, servo motor, nema17 stepper motor. Application in lane diverters, elevators, and conveyor belts 

• Power: 9-12kw
• Voltage: 220V
• Weight: 90-100kg
• Phase: Single Phase

External Rotor Motor, Axial Flow Fans, Centrifugal Blowers, Centrifugal Fans

• Phase: Two phase pair (four phase)
• Dielectric Strength: 500V A.C. for 1 Minute
• Iec Frame Sizes: 58 mm, 86 mm & 108 mm
• Type                           : Hybrid Type; Unipolar or Bipolar
• Step Angles                 : 1.8° full step; 0.9° half step
• Angular Accuracy          : ± 5% non-cumulative (No load)
• Swithching Sequence    : 4 step (Full step); 8 step (Half step)
• Stator winding              : Bifiliar, 6 leads or optional 8 leads
• Operating Temp          : -10° C to 50° C
• Temp Rise                    : Max 80° C
• Insulation Class   : Class B
• Insulation Resistance     : 100 MΩ min. at 500 V.D.C.
• Holding Torque        : 2 to 60 kg-cm in 12 models

Power : 25 WATTS TO 180 WATTS, Speed : 1300 RPM, WORM GEARED : 25 RPM TO 125 RPM, INLINE GEARED : 07 RPM TO 260RPM, VOLTAGE : 230VAC 1PHASE 220VAC 3PHASE415 3PHASE

• Brand Name: Portescap
• Rotor Inertia: 0.12 gcm
• Operating Voltage: 5.00 V
• Diameter: 15 mm
• Detent Torque, Max: 1.6 mNm

Resistance Boxes are used to add resistance into an electric motor circuit for modifying the performance characteristic of slipring induction motors of EOT cranes, rubber mills, steel rolling mills, cement mills, power plants, conveyors, coke oven, blowers etc. or speed control and developing starting torque with low starting currents. They are also used as Dynamic breaking resistor for V.V.F.A.C. Drives, electric loading of ac alternators, de generators and dynamometers. Resistors are designed to meet requirements of both A. C. & D. C. Applications.

• Brand Name: Leadshine
• Input Phase: Three Phase
• Frequency: 50 Hz
• Output Current: 7 10 16 mA
• Usage/Application: Industrial
• Peak Current: Pulse + Direction

Like any other conventional Motor, the External Rotor Motor has a wound Stator and an Aluminum Die Cast Rotor. The only difference is that in this case the Rotor moves externally around the stator. Salient Features : CE Mark and manufactured to EN 60335-1 Compact in size, Continuous Rating with High Efficiency, Variable Speed by changing Input Voltage or Frequency, Dynamically Balanced in 2 planes as per grade 2.5 of ISO 1940-1973 in accordance to VDI 2060, Winding Surge and H.V. Tested. Double Shielded pre lubricated Ball Bearings.

• Brand Name: Crompton
• Input Voltage: 220 V / 50 Hz
• Pump Type: Centrifugal
• Finishing: Galvanized, Paint Coated
• I Deal In: New Only
• Material : Stainless steel, Cast Iron

• Brand Name: Portescap
• Applications: Insulin Pumps, Lab Automation, Electronic Access Systems, Prosthetics, Inspection systems
• Nominal Voltage: 3.0 V
• No-Load Speed: 9,780 rpm
• No-Load Current: 16.0 mA
• Torque up to: 0.80 mNm

external rotor motors, Axial Flow Fans, Backward Curved Fans

• Type: Abb Dc Motors
• Application: MAchine Gear Shiftings
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg, 50-60kg, 60-70kg, 70-80kg, 80-90kg, 90-100kg
• Color: Black, Blue, Grey, Silver
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Manual
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Phase: SingleTwo, Three
• Current Type: DC, AC
• Speed: 1000-2000rpm, 2000-3000rpm, 3000-4000rpm, 4000-5000rpm

Power : 25 watts to 180 watts speed : 1300 rpm worm geared : 25 rpm to 125 rpm inline geared : 07 rpm to 260rpm voltage : 230vac 1phase 220vac 3phase415 3phase.

• Brand Name: TAGLab

We are offering dc series motor. 2 hp, 220 v,1500 rpm coupled with mechanical load suitable friction brake dynamometer set with 6” dial type spring balances & belt is fixed with motor base plate meters & accessories are fitted inside instrument panel.