Deluxe Metal Processing Chemicals Pvt. Ltd. Masjid Bunder, Mumbai, Maharashtra

Backed by expert chemists, we are able to formulate Meproche rust preventives in conformity with international standard Wide range of the chemical is produced from quality raw material Various types of Meproche rust preventives offered by us include following   Solvent types:   Tabulated below are the solvent type meproche rust preventives, we offer:   Meproche B Solvent based Quick drying Gives waxy film of thickness 7 to 12 microns Covers 70 to 78 sq. M. Per litre Easily wipe able   Meproche 267 Strong water displacement Fingerprint neutralizer used for indoor application Coverage 97 to 105 Sq. m. per litre Gives 7 to 12 micron film thickness Dries in 1.5 min.   Oil Types:   Wide range of oil types for meproche rust preventives offered by us are tabulated below: Meproche Light Thin oily consistency Used for indoor application Gives film thickness of 25 to 40 microns Covers 85 to 95 Sq. m. per litre Non drying Meproche Medium Medium viscosity Higher film thickness of 50 to 75 microns Non drying type Covers 58 to 64 sq.m/litre.   Meproche Extra Heavy Soft paste - for anti friction bearings Covers 3 to 6 Sq. m. per kg Gives a film thickness of 0.6 to 1 mm Non drying type.   Meproche TX Thixotropified oil type Initial greasy consistency Becomes very thin by heat or agitation and again sets on withdrawing heat or agitation High film thickness 80 / 100 microns   Non drying   Following are some of other meproche rust preventives we offer:   Meproche 155: Meproche 155 is water-soluble and water thin able synthetic rust preventive It finds application to protect iron & steels from rusting within shop and for finished packing There may be dripping of oil from the components in case of oil type rust preventive It results into exposure of the top surface and edges causing its rusting where as in case of Meproche 155 there is no dripping because it dries in 20 min or so Its coverage is four times than that of oil type rust preventives.

Purity : 99%

Feature : Resistant To Oxidation, Optimum Quality, Optimum Viscosity

Packaging Type : Drum, Can

Form : Liquid

Application : Industrial Use, Domestic Use

Our company is offering quality Meproche C-21 rust converter, that is based on polyhydroxy organic compounds It is efficiently used to remove rust from stored steel and old rusted steel already erected (whether in RCC or otherwise) With the chemical Meproche C-21 rust converter, pitted surfaces can be converted into a protective coat. It is supplied in two packs. A surface treated with Meproche C 21 accepts primers and paint fast. It increases adherence of primers and paints and thus improves the life of paints It covers approximately 70/75 square meter per Kg.   Method of application: Mix 50 gms of part A to 0.950 kg. of part B Apply on the rusted surface and leave it for 4 to 6 Hrs Remove rust by wire brush Repeat the process if necessary The chemical converts the balance rust into a passive state thus stop further rusting It provides temporary solution for rust prevention. It can later be painted or lined Rubber gloves should be used while handling Meproche rust converter as it is mildly acidic in nature   Note: The information provided is based on our experience and tests conducted by us on typical specimen However, the actual working conditions are beyond our control and knowledge Hence, we are not responsible for any liability for loss, damage, injury or mishap resulted

Type : Rust Converter

Purity : 99%

Form : Liquid

Application : Industrial Use, Domestic Use

Brand Name : Meproche

Meproche MN 660 : Working range 660° C to 890° C used as preheating salt for high speed tool steels, selective carbon steels and hot working steel prior to hardening with MEPROCHE 970.   Meproche MN 660 SPL : Working range 660° C to 930° C. Does not allow the formation of oxide film on the jobs. It is compatible with cynide and allows easier absorption of carbon.   Meproche MH 830 : Working range 830° C to 1100° C. Used for hardening of corrosion resisting steels, 2% carbon, 12% chromium tool steels and steels used for cutlery. Sometimes used as alternative to Meproche 970 or 1100 for hot working steels. Use of regenerator is recommended.   Meproche MH 970 : Working range 970° C to 1350° C. Used for heating the high speed and hot working steels to obtain the desired hardening temperature in the above working range. This salt avoids scaling as well as decarburisation of the steels. However certain types of above steels tend to decarburise during hardening in MH 970, resulting in a low surface hardness. Whenever this problem encountered, MH 971 should be used to prevent any decarburisation.   Meproche MH 971 : Working range 970° C to 1350° C. Used for hardening high speed steel and hot working steels with minimum amount of decarburisation.   Meproche MH 1100 : Working range 950° C to 1350° C. The most superior quality salt with high purity and practically no moisture content. Used with regenerator to clean the high salt bath. The regenerator contains deoxidising agent which reacts and converts the oxide impurities into slag thereby preventing decarburisation. Meproche 11000 is used for the heat treatment of - high speed steels. Hot working steels used for dies, punches, mandrels, moulds etc. and high carbon high chromium type steels. It does not allow decarburisation.

Form : Crystal Powder

Packaging Type : HDPE Bag

Brand Name : Meproche

Purity : 100%

Quenching, Marqueching & Tempering Salts & Oils. Meproche MQ 540 : Working range 540° C to 700° C Used for quenching and tempering high speed steel and hot working steels used for dies, punches, mandrels etc. after heating in MH 970 / 971. Also used for secondary hardening. When the bath becomes sluggish and regenerator to keep the bath clean Meproche MQ 495 : Working range 495° C to 700° C Specially developed salt to consume less energy. Has lower melting point It is used for quenching and austempering. Meproche MT 150 : Working range 150° C to 270° C Used for tempering steels after hardening to reduce brittleness in the hardened steels and remove the internal stresses caused by the sudden cooling in the quenching bath Jobs after cyaniding should not be quenched directly in MT 150 as it reacts violently with cyanides Meproche MT 220: Working range 230° C to 350° C This salt is very stable and melting point or working range does not change after repeated uses, therefore martempering & isothermal quenching can be carried out very efficiently It reacts violently with cyanides Meproche Quenching Oil: Mineral oil based with low viscosity and high oxidation stability Compounded mineral quenching oils are widely used as they result into good proportion of hardness and toughness and give least warpage with standard steels

Brand Name : Meproche

Appearance : Slightly Pale

Oil types: Meproche H-60: Cutting oil, good for hard water, Gives milky emulsion with water to be used at 4 % concentration Good E. P. properties Used for drilling, turning, milling, boring etc.   Meproche Antisep 'K' : Specially designed coolant base for grinding bearing races / rings has high refrigerant base and is having E. P. additives - Product was specially developed for SKF, Pune   Meproche Conc Soluble Grinding Fluid: Water thinneable, Semi synthetic, Solution type, Very good bactericidal properties, Good rust preventives 2% concentration passes IS specification, Used 4%   Mainly for steel ball manufacturing Meproche STG: Transparent grinding coolant, good corrosion inhibitions Use 2 to 10% depending on application, Fully Synthetic, water soluble, suitable for centreless grinding, cylindrical and surface grinding   Meproche Dewatering fluid: For removal of moisture from jobs which are machined by water based coolants The water so removed gets settled at bottom and can be drained out   Meproche broaching oil: For high heat removal good swarf removal capacity Imparts very good surface finish Non Inflammable   Meproche honing oil: Specially designed coolant Very thin consistency   Used for honing compounded with rust inhibitors, wetting agents, anti oxidants and water repellents   Meproche drawing oil 431: Thick consistency Used for wire ropes Removes heat and lubricates the die gives good surface finish   Meproche TTL: A synthetic lubricant: Used for processing nonferrous metals Does not leave any film or soot after annealing Used for extrusion / drawing of sections

Packaging Type : Bucket, Bottle, Drum, Barrel

Brand Name : Meproche

Form : Liquid

Brand Name : Meproche

For removal of moisture from jobs which are machined by water based coolants The water so removed gets settled at bottom and can be drained out

Brand Name : Meproche

Application : Industrial

We are providing wide range of machining fluids oil types to our international clients The chemical is formulated from quality raw material We are a quality driven company and do its stringent checking prior to its disposal at clients end.   Meproche H-60 Cutting oil Good for hard water Gives milky emulsion with water To be used at 4 % concentration Good E.P. Properties Used for drilling, turning, milling and boring   Meproche Antisep ''K'' Specially designed coolant base for grinding bearing races / rings having high refrigerant base and e. P. Additives Product was specially developed for skf - pune.   Meproche Conc Soluble Grinding Fluid Water thinneable Semi synthetic - solution type Very good bactericidal properties Good rust preventives 2% concentration passes is specification Used 4% mainly for steel ball manufacturing   Meproche STG Transparent grinding coolant Good corrosion inhibitions Use 2 to 10% depending on application Fully synthetic Water soluble Suitable for centreless grinding, cylindrical and surface grinding

Purity : 100%

Packaging Type : Bucket, Bottle, Drum, Barrel

Features : Better surface finish

Brand Name : Meproche

Color : White

Form : Powder

Shelf Life : 1 Year

Application : Industrial, Labortary

Purity : 99%

Packaging Size : 25/50 kg

Packaging Type : HDPE bags

Form : Crystals

Brand Name : Meproche

Purity : 100%

Meproche Conc Soluble Grinding Fluid: Semi synthetic Solution type Very good bactericidal properties Good rust preventives 2% concentration passes IS specification Used 4% Mainly for steel ball manufacturing

Form : Liquid

Application : Industrial

Packaging Type : Bucket, Bottle, Drum, Barrel

Feature : Water Thinnable

Type : Concentrated