Density Testing Equipment Dealers in Mumbai

• Weight: Net Wt 15 kgs
• Dimension: 280 mm x 290 mm x 275 mm
• Supply: 230 V 50 Hz 1 Ph. (Optional 110 V 60 Hz )

The "Thermonik" Powder Density is specially designed to study the packing down of powder beds of different pharmaceuticals and chemicals powders, flakes, pellets, granules and other bulk substances. Powder Density is an essential test required in the process of tablet manufacturing, Capsule filling and cosmetic manufacturing.The Powder density apparatus is equipped with Microcomputer Based 'LCD Display' System. The "Switches" are provided on the front panel of the apparatus for setting total number of strokes to the glass cylinders. Each stroke of the cylinder is displayed on the "LCD Display' window on the panel. The Up and down movement of the cylinders stop automatically at the Pre-set number.he advantage of Micro-Computer based LCD Display over the Old type model with the mechanical Timer is that "Digital Display" of total strokes gives accurate and exact number of Strokes given to the cylinder.

We are offering portable meter. Meco-g portable type instruments are electrodynamometer type watt var p.f. Instruments. They can be used in single phase, three phase three wire and three phase four wire system and are designed to be used in horizontal positions.

the digital bulk density apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. bulk density is an essential test required in the process of tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based pre-set counter provided to set exact no of strokes. this feature eliminates the tedious calculation of timer mode. a common holder for both the cylinder drops down smoothly from the specified height. easy to lock cushioned holders are provided to hold the cylinder. in power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. it has the following features: specifications : » display: digital 12 mm red led» speed range - 30rpm mechanical timer/digital counter as per enquiry.

• Type: Automatic
• Material: Metal
• Application: Laboratory
• Voltage: 220V
• Finishing: Power Coated
• Power Supply: Electric
• Warranty: 1 Year

Salient Features :  Complies with USP and ASTM specifications Supports both USP I, USP II test methods Two cylinder holders with snap-lock mechanism for 100 ml and 250 ml cylinders Simultaneous rotating and tapping motion assures an evenly packed surface 24 x 2 alphanumeric LCD display User friendly operation with menus and current status indicators Calculation of Test results like Tapped Density, Compressibility Index and Hausner Ratio. Printer port for documenting test results as per GMP/ GLP standards.               Microcontroller based Tap Density Tester ETD-1020 complies with USP and ASTM specifications. The unit offers a simple and standard means of measuring the tapped density of powders, granules, pellets, flakes and other bulk substances.   The ETD-1020 is a two station tap density tester supporting both USP I and USP II methods of testing. The unit allows any one test to be performed at a time. The test can also be performed as per ASTM standards using the optional adapter for cylinder holders. Two different cylinder holders with snap-lock mechanism are designed to hold the 100 ml and 250 ml cylinders.   To ensure a free drop of the cylinder from the required height, the two stations are provided with virtually friction-free bearings. Each station is directly driven by independent motors to ensure a maintenance-free drive. A simultaneous rotating and tapping motion minimizes any possible separation of the mass during tapping down.   The test can be performed in two different modes USP mode and USER mode in both test method. In USP mode, test will run in selected method with set number of taps. At the end of the test, results like Tapped Density, Compressibility Index and Hausner Ration are calculated and displayed.   A validation report can be printed at the end of the test as per GMP / GLP requirements which includes the test parameters, test results and actual time and date on which the test was performed. It also includes serial number of the instrument along with the entry fields for user name and product details.   In User mode the number of drops can be programmed from 1 to 9999. The test can be performed in either of the methods i.e. USP I or USP II.   During the test the user is guided through a series of prompts on the LCD display. The on-line menus and status indicators make the operation of the instrument.   The value once programmed is retained in the memory of the instrument. The unit has a power failure detection facility which allows the user to complete the remaining test after the power supply is resumed.

Digital reading of strokes. Housed-in powder coated body to hold two cylinders of 50 ml. Max strokes settable 999. Supplied without measuring cylinder

• No. of tap counts: 10, 500, 1250
• No. of taps (user mode): 1 to 9999

Bulk density apparatus Tap height: USP I : 14 mm - 2 mm, USP II : 3 mm - 0.2 mm. Taps minute: USP I : 300 mm - 15, USP II : 250 - 15. Type of drive: Direct drive with stepper motor.

• Power: 1-3kw
• Application: Industrial Use
• Material: Metal

• Voltage: 220
• Power Source: Electric
• Pressure Gauge: 2 Kg/cm2
• Power: 110 W
•  :  

• Application: Density Testing
• Voltage: 220V
• Type: Smoke Density Test Apparatus
• Country of Origin: India

Smoke Density Test APparatus for FRLS Cables and Cable Compound

• Brand Name: AIC

We are offering density basket. 20 cm dia x 20 cm height, fitted with galvanised wire mesh 6.3mm size with handle. Complete with measurement report traceable to national standards and instruction manuals.

• Repeatability: ± 3 x 10-5 g/cm3
• Measuring range: 0 - 3 g/cm3

Designed for fast and reliable measurement of the relative density and concentration of fluid samples. New oscillating U-tube sensor. High precision and reproducibility combined with simple and error free operation classifies the EDM- in the field of high performance density meters. Technical specifications are in accordance with the requirements set by the European and American Pharmacopoeia and other worldwide standards. Highest precision and reproducibility. . . Integrated reference oscillator.

This apparatus is designed to determine the density of powder beds of different pharmaceutical & chemical powders. It is most useful in the field of tablet manufacturing , capsules filling and cosmetics manufacturing. The housing is made of CRCA sheet with attractive duco paint. A motor moves a shaft having clamps at both the ends to hold graduated glass cylinders in an up and down direction at a frequency rate of about 30 strokes per minute through a distance of 5 to 6 cms . The flanged bottom of the glass cylinders stick on a cushion fitted on the platform. A mechanical timer cum stroke counter switch is provided to set the number of strokes upto 450. Suitable for 2 cylinders of 50 ml (supplied without glass cylinder)Operating instructions1) Un-screw the knurled rings of the two cylinder holding bracket by turning them in an anti-clockwise direction.2) Weigh the powder first and then fill it in both 50 ml cylinders ( one cylinder can be used for your standard powder and other one for the test sample )3) Keep the cylinders on each of the bracket and insert the knurled ring from the top of the cylinder and tighten it gently by turning it till the cylinder is held firmly on the bracket.4) Connect the three pin plug to 230 V A.C. supply and switch " ON" the main switch. Red neon light will glow indicating that the mains is " ON ".5) Turn the black knob of the mechanical counter in clockwise direction and set it to the required stroke on the dial. Red neon light will glow indicating that the motor is " ON ".6) The bracket carrying the 2 cylinders will move up and fall down on the rubber bed with about 30 strokes per minute. The black knob pointer will come to its original position, slowly as the required counts of the strokes are completed and at the same time it will switch "off " the motor and also red neon light.7) Note down the reading on the cylinders and then calculate the bulk density.Bulk density = weightvolumeNotice : do not turn the mechanical counter knob in anti-clockwise direction , if done, it will damage the regulator.

• Display Type: LCD
• Brand: Universal Lab
• Security: 3 Level Security
• Measuring Cylinders: 100ml & 250ml
• Packaging Type: Box

Salient Features For solid density determination Suitable for ,AB,DAB,HPB & PGB sERIES Can use for other weighing balance also STANDARD ACCESSORIES Beaker Base Beaker PAN stand Pans suspension Thermometer Thermometer Power Supply -DC7.5V   According to the Archimedean Principle, Solid Body Immersed in a liquid apparently loses as much of its own weight as the weight of the liquid it has displaced.This makes it possible to determine the unknown value.Depending on whether the body in quotient is liquid or solid.The International System of units specifies Kg/m3 as the unit of density. However,the unit g/cm3 is better suited to lab purpose

NON DIGITAL Provided with Mechanical timer without glass cylinder - M.S.I.47DIGITAL supplied without glass cylinder - M.S.I.76Glass Cylinder 100ml Available per pcGlass Cylinder 50ml Available per pc

• Weight: Net 17 Kgs, Gross 25 Kgs
• Height (mm): 14 ± 2 (USP I) 3 ± 0.3
• Dimensions: 360 L X 320 W X 200 H

Supports both USP I, USP II test methods , Two cylinder holders with snap- locK, mechanism for 100 ml and 250 mi cylinders, Simultaneous rotating and tap- ping motion assures an evenly packed surface, 24 x 2 alphanumeric LCD display, User friendly operation with menus, helpline, and current status indicators, Calculation of Test results like Tapped Density, Compressibility Index and Hausner Rati To ensure a free drop of the cylinder from the required height, the two stations are provided with virtually friction-free bearings. Each station is directly driven by independent motors to ensure a maintenance-free drive. A simultaneous rotating and tapping motion minimises any possible separation of the mass during tapping down, Printer port for documenting test results as per GMPGLP standards. To ensure a free drop of the cylinder from the required height, the two stations are provided with virtually friction-free bearings. Each station is directly driven by independent motors to ensure a maintenance-free drive. A simultaneous rotating and tapping motion minimises any possible separation of the mass during tapping down.During the test the user is guided through lows the user to complete the remaining a series of prompts on the LCD display.

• Features: Lightweight, ergonomic design accommodates single-handed operation, right or left hand compatible, laboratory setting quick and easy.

Digital Automatic Tap Density / Bulk Density Apparatus offered by us is designed to meet the requirements of USP Standards. This product can hold two cylinders and its capacity is 100 ml. The mechanism provides simultaneous rotating and tapping motion to the cylinders, which facilitates packing the sample under test evenly and uniformly together. Users can select the number of stokes in the counter and after selecting just press start, it will start the stokes & the display shows the number of strokes. Incorporated with Advanced Microcontroller. Alphanumeric display and user friendly feather touch keypad. Equipped with inbuilt validation facility. Non-volatile memory for storage of 24 test methods’ data. Informative help prompt messages displayed, to guide user while conducting test. Updated test status displayed. Calculates Bulk Density, Tapped Density, Compressibility Index and Hausner Ratio Simultaneous action of rotating and tapping of the cylinders. Supports USP – I and USP – II. ASTM method (Available Optionally) Print format as per GLP requirements.

• Application: Balancing
• Weight: 10-20kg
• Color: White
• Voltage: 110V
• Display Type: Analogue
• Power Source: Electric
• Power Supply: 1-3kw
• Feature: High Accuracy, Optimum Quality

In case of determining the density of solids and liquids with application of Aczet density determination kit, the whole procedure is very much simplified and speeded up. Time till the operator receives the density measurement is very short, as all the calculation is performed by the software of the weighing instrument, and operator’s activities is limited to : operation of the keyboard of weighing instrument, placing the samples on the weighing pans of the kit, hanging the plunger. Determining the density of solids and liquids is an inseparable part of work of the laboratories. Traditional method of density determination requires from the operator many measurements and a lot of complex calculation. In result the operator ends with a density determination result which can be saddled with calculation and systematic errors. Additionally time that needs to be devoted to density calculation is long. Density determination kit is additional equipment offered to Aczet laboratory balances. The software for determination of density has following basic features : Simplicity of usage (all activities are described on the display of the balance), Reliability (all calculation is automatically performed by the balance’s software), fast data processing (result is obtained after determination of sample mass in water or plunger mass in liquid), Accurate data processing (before every measurement of mass, display indication is automatically zeroed, this proves the density determination result to be reliable and real).

• Warranty: One year
• Country of Origin: Made in the U.S.A.
• Features: Compact, Lightweight (<15LB) ,High Resolution,High benefit-to-cost ratio,Built in RTD & 4-20mA temperature transmitter, Frequency output for density calculation with customer-owned flow computer.
• Available Density: 4-20mA output
• Applications: Interface Detection, Live Density Monitoring ,Product blending ,Process quality control.

• TAP HEIGHT: 14 mm +/- 2 mm

DIGITAL AUTOMATIC TAPBULK DENSITY TEST APPARATUS:Incorporated with Advanced Microcontroller.Equipped with Built-in Validation Facility.Auto Tap repeat facility till the test is completed.Calculates Bulk Density, Tapped Density, Compressibility Index and Hausner Ratio.Also available as pr ASTM Standards.

We are offering tap density meter fast & accurate way to determine tapped density.

• Brand Name: METTLER TOLEDO
• Application: Laboratory
• Model Number: Densito & Densito Pro
• Power: Electric
• Type of PH Meter: Portable

• Type: Automatic Density Meter
• Material: Aluminum, Cast Iron, Plastic, Stainless Steel
• Application: Industrial
• Color: Brown, Green, Grey, White
• Voltage: 110V, 220V, 230V, 380V, 440V, 450V
• Driven Type: Electric
• Feature: Accuracy, Digital Water Meter Display
• Warranty: 1 Year, 2 Years, 6 Months
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Opearting Temperatue: 10-50D/C, 50-100D/C

Density meter, SMART PYCNO 30, is used to measured the true density Specific gravity of any material by precisely determining true volume of the material.

Bulk Density Apparatus, autoclave beaker, Impeller for Air Curtain

liquid density meter