Dextrins Dealers in Kurla, Mumbai

• Features: High adhesive strength,Solvent resistant,Accurate composition
• Packaging Size: 50ml to 30ltr

• Brand Name: MYK Laticrete
• Appearance: Off white after mixing
• Model Number: PUA212
• Packaging Size: 8 KG
• Packaging Type: Bucket
• Surface Of Application: Steel, Metal
• Grade Standard: Chemical
• Strength: High

• Material: Cyanoacrylate
• Brand Name: Speb

Since, we have a widespread supply chain network; we can satisfy buyers by catering to bulk requirements and making delivery within the stipulated time. With stern quality examinations on varied stages of deigning and manufacturing, even the raw inputs used are completely examined by the professionals. This helps us in delivering the finest array of products with complete precision.   Features : Highly effective Non-adulterated Precise pH value Free from impurities Properly packed Highly used

Perma Super CladexAMBIENT CURE EPOXY ADHESIVE KIT FOR VERTICAL CLADDING OF MARBLE, GRANITE & DECORATIVE STONESDESCRIPTIONPerma Super Cladex is a two component, fast setting, high strength epoxy adhesive system. Perma Super Cladex is used for fixing stones, granites, marble, tile and any such claddings material on to the vertical surfaces. Perma Super Cladex helps in holding the bonded surfaces through various climatic temperatures and various water and chemical exposures.PRIMARY USESPerma Super Cladex is ideal for bonding granite, marble, tiles, stones and any such decorative cladding material to the concrete or stone wall surface. This product achieves a strong bond between the surfaces within minutes, reducing the support time need before bonding. Used as a bonding agent between two segments of bridge girders, when properly applied on both surfaces.ADVANTAGES High strength. Durable. Resistance to water and chemical attack. Solvent less Epoxy System Supplied in Pre-Weighed units Hardens quickly DIRECTIONS FOR USEPreparation: All surfaces must be thoroughly cleaned and prepared. All loose particles, laitence, dust, curing compounds, oil, grease, fat, bitumen and paint must be removed if good bond strength is to be achieved.Gloss surfaces must be abraded. If oil or grease are present, scrub surface with hot detergent water and rinse thoroughly. Where the concrete surface is badly disintegrating, the degraded areas should be removed by chipping, grit blasting, or scabbling until a sound base is obtained.Remove loose par ticles and prepare as above.All laitence that has not been worn away should be removed by mechanical scarification, sandblasting, or by acid etching. Visible signs of mould growth, lichen or algae, should be removed and treated with a fungicidal wash. New concrete should have cured until the shrinkage and moisture movement is low. Surfaces heavily impregnated with mould oil should be degreased and sandblasted or mechanically scarified to remove the contaminated surface. All curing compound should have disintegrated or be removed and application carried out only over clean, dust free surface.                                  MIXINGCarefully transfer the entire contents of the Reactor Component to Base Component and mix thoroughly, using a stout, palette knife or a slow running drill with a paint mixing paddle until uniformity is achieved. This normally takes 2-3 minutes.GUIDE TO APPLICATIONApply the well mixed Perma Super Cladex on the back of the granite, marble, or the tile to be cladded in sufficient spots to ensure good bonding. Press the cladding material against the surface to be cladded and support it for a few minutes till the Perma Super Cladex holds the surface together.PACKINGPerma Super Cladex is available in 200 gms, 500 gms and 1Kg pack & 2 kg pack of equal quantities of Base & ReactorSHELF LIFEPerma Super Cladex has a shelf life of 12 Months from the date of manufacturing.DISCLAIMER PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks. The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose. PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results. The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

• Color: Tan
• Model Number: EC-6601
• Cure Characteristics: Room Temperature Long Working Time > 10 min
• Durometer - Shore A: 80 Shore A
• Elongation: 194 %

Anaerobic materials for pipe sealing harden to insoluble plastic fillings and provide protection from leaks. With this type of pipe sealing, anaerobic single-component fillers fill the microscopically small gaps between the interlocking threads and polymerise to a tough solid on contact with metal when air is excluded.

Ascolite mortar is a semi premix high quality mortar for jointing and bonding of aac blocks, concrete blocks, hollow blocks, clay bricks and fly ash bricks. Ascolite mortar semi premix consists of cement, graded sand and specialised polymers which combine to give superior strength, water retention and stability. It replaces the conventional method and material of jointing mortar which requires a 12-18 mm thickness with a revolutionary 2-3 mm joint thickness. Ascolite mortar only requires addition of water before application to prepare the product for use, reducing the hassle of measuring and maintaining various individual elements to create a conventional mortar. Standard specification code followed is astm c1660-09.

• Grade: Construction
• Packaging Size: 10 ml to 100 ml
• Brand Name: Hi Bond
• Feature: Heat Resistant
• Form: Gel
• Surface of Application: Glass

• Grade Standard: Industrial Grade
• Brand Name: Kevin
• Packaging Size: Customized
• Surface of Application: Plastic
• Viscosity: Paste
• Power Source: Electricity

• Packaging Size: 5 litre
• Grade Standard: Industrial Grade
• Brand Name: Ever plus
• Material: Adhesive
• Question: 5 litre

Perma Liquid Tile Adhesive (LTA) is a complex polymer based white liquid that is added to the bedding mortars used for fixing ceramic tiles, granite slabs or marble slabs on horizontal surfaces. Liquid Tile Adhesive dramatically enhances the adhesive, tensile and waterproofing properties in the mortars so that it prevents weeping joints in the floors and skirting. The product can be added to neat cement as well, to improve the properties of the paste.

Our catered range is processed using finest quality ingredients and employing modern techniques. We even ensure to follow the industry set norms and guidelines during the processing of the offered range.

Bitubond is manufactured from selected grades of bitumen with mineral oils. it is of semi-liquid, creamy consistency and supplied in ready to use containers. As cold applied bitumen binder in p[lace of hot bitumen for sticking of bitufelt on metals, timber, tiles, asbestos, concrete and masonry surfaces Waterproofing the roofs of buses, tramcars and railway carriages As a mop coat over the existing waterproofing treatment, this will longivate the life of bitufelt.

Tile Adhesives, anti corrosion products, under water application products

Adhesives, Latex, Leather Board, Solvents, Packaging Materials

Industrial Adhesives, Industrial Bearings, Industrial Greases

Synthetic Rubber Adhesives, Polyurethane Adhesives

• Brand Name: Hibond
• Application: Bonds metals, rubber, plastics, wood, stone
• Model Number: CA 111

Hibond cyanoacrylate adhesive is a very strong instant bonding adhesive. Used for bonding similar and dis similar substrates like metals, rubber, wood, plastics, glass, ceramic etc.

Synthetic Resin Adhesives, emulsions

We deals in supplying of wide range of Adhesive.

Adhesives, Greases, consumables, Compression Fittings, Bearings

Pu based adhesives, sr based adhesives, hardeners, tpr primers

Adhesives, salwood, Bakelite Sheets, Laminates, Teakwood

We offer Tetra N Butyl Titanate Monomer. Owing to our expertise in this domain, we are indulged in offering a broad spectrum of Tetra N Butyl Titanate Monomer.

Synthetic Rubber Adhesive, Godrej Air Freshener, Fresho Sani Cubes

Spray Adhesive, PU polyurethane footwear, SR SYNTHETIC RUBBER

Gasketing Adhesives, Anti Slip Flooring Lubricant, Kerodex Barrier Cream

Polyurethane Adhesive, neoprene rubber adhesive, leather, Foam