Diamond Cutting Tool Dealers in Vidya Vihar, Mumbai

The maximum depth of cut achieved per dressing pass is 0.03 mm or on fine grit wheels, approximately 0.005-0.01 mm. ( Single Point Diamond Dressers ) The cross feed rate is dependent upon grit size and can have a marked influence on the quality of the finish imparted to the grinding wheel surface. The lower the feed rate, the finer the surface finish. We would recommend the following feed rates per revolution of the grinding wheel. An ample supply of coolant should be directed at the diamond point before dressing begins, as the sudden application of coolant to the diamond once it has heated up can cause it to shatter. The diamond holder should not be set directly on the center of the grinding wheel, but at an angle of 5-15 to the direction of rotation of the wheel so that it appears to be "trailing"

• Depth of cut per stroke of the dresser: 0.01-0.05 mm max.
• in mm per revolution: 0.3 - 1.5 mm max.

Cluster type diamond dressers consist of a number of small natural diamond of good crystal character, set in a geometric pattern in single layer and sintered into a special wear resistant bond.The cluster type diamond dresser is ideal for coarse or rough dressing of grinding wheels in sizes up to 80 grit (mainly rough grinding or grinding to eliminate imbalance). The diamonds can be fully utilised without re-setting or re-sharpening.Dressing costs are substantially reduced as the diamonds used in this type of dressers are much smaller in size than single point diamond dresser, so they are much economical.

• SKU: 110A20001

Gross Wt - 3.120 gm Net Wt - 3.004 gm Stones - Diamond 0.42 ct, Rubies 0.16 ct Metal - 18kt  

Diamond Grit Impregnated Dresser, Polishing Cloth, PCD PCBN ISO Insert

Diamond Ring - 13, Diamond Ring - 14, Diamond Ring - 15, Diamond Ring - 16

Single Point Diamond Dressers Natural and Bruted Point

Single point "bruted diamond" dressers are made with selected "Congo Rounds" mounted in a matrix. A Single cutting edge is presented to the grinding wheel. Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality, depends on the grinding finish required and the machines and working parameters. We offer three grades namely A, B & C for all the diamond size, Availability: 0.25 Ct to 5.00 Ct Natural Point Diamonds: The Diamond points are naturally formed. (Not man made like grades A, B, & C) This is a gift of nature. Natural Point Diamond Dressers have high form retention properties. Availability: 0.10 Ct to 2.50 Ct Guideline for Single-Point Diamond ressers : Considerable care should be taken in mounting the diamond dresser in position. Diamonds are sensitive to shock and impact. The dresser must be clamped rigidly in place to avoid vibration once dressing begins. An ample supply of coolant should be directed at the diamond point before dressing begins, as the sudden application of coolant to the diamond once it has heated up can cause it to shatter. The diamond holder should not be set directly on the center of the grinding wheel, but at an angle of 5-15 to the direction of rotation of the wheel so that it appears to be "trailing" At normal wheel peripheral speeds, dressing rates of approximately 20-25 m/sec can be achieved.

• Shape: Round
• Material: Stainless Steel

Diamond Needle Files, Die Springs, Ejector Pins, Industrial Gas Burner

Diamond Dresser, Cutting Tools, Diamond Tools

Diamond Cutting Tools, hand machine tools, diamonds machine tools

Diamond

Diamond Earring, Gold Pendants, Gold Necklaces, Diamond Rings

Diamond, Jewellery, Imitation Jewellery

Designer Hair Accessories, Silver Necklace, Silver Gift Articles, Silverware

Diamond Cutting Tools