Digital Process Controller Dealers in Mumbai

We specialize in offering highly efficient digital bell controller, which is acknowledged for its easy programmability. The digital bell controller basically allows control over the duration of the ringing of the digital bell. This digital bell controller is appreciated for its application in schools and colleges. This digital bell controller enables a clear bell ringing signal while ringing. why our digital bell controller? always rings the bell at right time every timeensures accurate control over bell systemmaintains the real time bell time even during power failurescustom designed and installed as per the specific institution’s requirements

• Brand Name: West Control Solutions
• Model Name/Number: 6100+ & 8100+ & 4100+
• Enclosure: IP66
• Certifications: CE,UL,ULC,CSA
• Sampling Time: 4 per second,14 bit resolution approximately
• Output Type: Relay,SSd,DC linear V or mA,Triac,24V transmitter power supply
• Product Category: Single Loop Controller
• Dimensions and Size: 48mm x 48mm x 110mm (HxWxD),1/16 DIN; 96mm x 48mm x 100mm,1/8 DIN; 96mm x 96mm x 100mm,1/4 DIN
• Primary Input Type: Universal (TC,RTD,DC linear mA/mV)
• Other Inputs: Digital,Remote setpoint
• Max. Number of Outputs: 3
• Control Type: PID,ON/OFF,Manual,Alarm,Ramp to Setpoint
• Power Supply: 100-240V AC 50-60Hz,20-48V AC 50/60 Hz,22-65V DC
• Communicatons: RS-485 serial (West ASCII or MODBUS)
• Panel Sealing: IEC IP66,NEMA4X

• Brand Name: PPC
• Driven Type: Electric
• Current Type: AC
• Color: Black
• Condition: New
• Power: 220V
• Application: Industrial
• Size: 72(w)* 72(h)* 110 (d) Mm (cutout- 68*68mm) 48(w)* 96(h)* 110 (d) Mm (cutout- 46*92mm) 96(w)* 96(h)* 110 (d)mm (cutout - 92*92 Mm)
• Model Number: ppc-dtc
• Feature: High Performance
• Voltage: 230
• Display Type: Digital
• Type: Digital Temperature Controller, FE-CON(J) / CR-AL (K) / PT-100 (RTD)
• Weight: .200-400gm
• Theory: Temperature Controller
• Frequency: 50Hz
• Temperature Range: 0-400C
• Resolution: 1
• Accuracy: 1
• Country of Origin: India
• RANGE: 0 -60.0/100/250/400/600/1200 degree centigrade,
• OUTPUT: TIME PROPORTIONAL / ON-OFF - RELAY- 6A/10A ( 1C/O) / SSR
• SETTING: POTENTIOMETRIC SETTING (PUSH TO SET ),
• DISPLAY: 3 ½ DIGIT, 7 SEGMENT DISPLAY,
• POWER SUPPLY: 230 VAC / 50 HZ

Digital Temperature Controller heat or cold generators (with manual and programmable automatic defrosting).Temperature display and adjustment. All purpose temperature controller. Front panel functions :- Relay ON Indicator. Defrost Indicator Alarm Indicator Timer Indicator Keypad Lock Indicator

As the name suggests, our unique range of Digital Timer Controller is used to control any equipment like electrical appliances, sirens, periodic ringer, and it has a permanent memory for saving settings. Being the largest Manufacturer, Exporter and Supplier of Digital Timer Controller, we pride in offering Digital Timer Controller that is easy to use, and the USP of these controllers is that they can be shut off from the compressed air system, enabling easy and safe work to be carried out. Some of the salient features of Digital Timer Controller is as follows :   Features: Compact in size Timing upto 99sec, 99min, 99hour. (can supply any other combination of times) Time setting for both On and Off mode separately Count-down display to show remaining time LED indicator to show current mode LED Display Permanent memory for saving settings Easy to install and operate Solid state load drive for longer life Application : As a universal Timer to control any equipment like, electrical appliances, Sirens, Periodic Ringer as much as you can think and apply.Technical Specification : Size -  48mm x 48mm x 68mm Auxiliary supply - 12VDC, 24VDC, 48VDC, 110VAC, 230VAC Setting input type - 3 switches on front panel Load drive specification - 12VDC, 48VDC, 110VAC, 230VAC Indications - LED Display - 2 digit LED display Other Information Minimum Order Quantity: 1 Set Production Capacity: 100 per month Delivery Time: 1 to 2 week Packaging Details: Shockproof corrugated box. LED display Count-down display to show remaining time Compact in size Timing upto 99sec, 99min, 99hour We are based in Maharashtra, India.

• Power: 230V AC ± 15%, 50/60 Hz
• Size: 96 x 96 x 110mm, 48 x 96 x 150mm

Digital temperature controller, The Dimension are 96 X 96 X 150mm. Other related products manufactured are Potentiometric type controllers withwithout deviation indicator, Portable and Mains operated temperature indicators.Display : 4.5 Digit, 12.5mm Red Led. Range : 100 0C to 1700 0C in various models Resolution : 0.1 0C or 1 0C Accuracy : Better than 0.25 % ± 1 digit Sensor : Suitable for RTD (pt100), thermocouple (Type J, K, R, S, T), solid state Sensors.

• Application: Control Panel
• Condition: New
• Warranty: 1 Year
• Graphics Card Type: Integrated
• RAM: Up to 16 GB
• Processor: i3, i5, i7
• Ports: RS232, RS485, I2C, SPI, USB Communication

• Size: 96 x 96 mm
• Frequency: 50 Hz
• Model No.: MDC Series
• Control Type: PID/On-Off
• Input Type: Thermocouple, RTD, Current (mA), Voltage (mV)
• Control output Type: Relay/SSR, Analog (mA/mV)
• Brand: Multispan

we manufacture and supply high grade digital temperature controller. Our digital temperature controllers are designed to measure, display and control temperature of furnaces over wide range, with high accuracy. Different digital temperature controller sensors are used for the desired temperature control range. In our digital temperature controller, uses of proportional controller minimize overshoot and undershoot of the furnace. The measured temperature is displayed on a digital led display of our digital temperature controller. features of digital temperature controller automatic cold junction compensation (thermocouples)broken sensor indication & sensor linearizationusing dfg techniques are the standard features

• Type: Digital Temperature Controller
• Application: Industrial
• Weight: 400-800gm
• Color: Black
• Feature: Auto Controller, High Performance, Stable Performance
• Condition: New
• Display Type: Digital
• Theory: Temperature Controller
• Frequency: 50Hz

setpoint and process both are displayed simultaneously. the process display is 12.5mm height. the setpoint display is 8mm height. the power supply is 90-260 vac. notes 1. on-off control: relay is on upto the set temperature and cuts off at the set point. system temperature will come down and again relay will go on at temperature 2 °c below the set point. same function is repeated. adjustable dead band is provided for specific application. time-proportionating control : relay will be on and off in band of ±2 °c of set-point. on-off : time will adjust as per the heat requirement of the system. of course total time cycle will be of 15 seconds. 2. 4½ digit temperature indicator/controller nippon 2020a. 3. contact factory for supply volts of 90 - 260 vac & retransmission output     principle  :  input signal is signal conditioned, linearised and amplified.  it is compared with the set point and accordingly relay operates.   inputs  :  j,k,r,s,t and other thermocouples, r.t.d's like pt-50, pt-100 (2~3 wire), 0-1vdc, 4-20 ma... etc. range, indicating  : refer table - a accuracy, resolution ambient compensation: automatic  setting  : by push button - coarse/fine pots or by membrane key - trimpot setting accuracy : better than 0.2% output  : relay contacts rated at 230v/6a. control  : on-off or time-proportional (refer note on back side)  sensor open protection: built-in indicates ' 1', relay cuts-off.  ambient temperature:  0-55 °c supply :  230 vac ±10%, 50 hz standard, 90-260 vac on request. box size  :  96 (h) x 96 (w) x 180 (d) or  72 (h) x 72 (w) x 110 (d) or  48 (h) x 48 (w) x 100 (d) in mm note : 24 vdc for loop power 4-20 ma input on re

• Power: 230 VAC
• Control Type: On-Off
• Phase: Single Phase
• Frequency: 50 Hz
• RH: 10-95%, Non-condensing
• Temperature Range: 20 to 80 Degree Celsius

• Voltage: 110-230 VAC
• Frequency: 50/60 Hz
• Brand Name: EEC
• Size: 48 x 48 mm
• Control Type: On-Off
• Input Type: RTD, Thermocouple

• Brand Name: Texas Star
• Size: 48 x 48 mm
• Temperature Range: 2 Line- 7 Segment
• Display Type: LCD
• Voltage: 100V
• Frequency: 50Hz
• Model No.: DX350 HDV
• Control Type: PID/On-Off
• Usage/Application: Electrical Fitting

• Frequency: 50/60 Hz
• Display Type: 4 Digit/7 Segment
• Voltage: 110- 230 V AC
• Resolution: 0.1°C.
• Accuracy: ±1°C (-50 – 70°C).
• Mounting Type: Wall
• Control Type: On-Off
• Brand: Selec
• Temperature measuring range: -50 – 99°C.
• Sensor error delay: 1 minute.
• Power supply: 220 VAC±10%, 50/60Hz
• Power consumption: ≤3 W.
• Sensor: NTC sensor (1PC).
• Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC.
• Ambient temperature: 0 – 60°C.
• Storage temperature: -30 – 75°C.
• Relative humidity: 20% – 85% (No condensate).
• Front panel size: 75(L) x 34.5(W)(mm)
• Mounting size: 71(L) x 29(W)mm.
• sensor length: 1m (include the probe).
• Product size: 75(L) x 34.5(W) x 85(D)mm.
• Package includes: 1 x 220V Mini Digital Temperature Controller. 1 x Temperature sensor probe with cable. 1 x Instruction Manual.

Libratherm̢۪s new ECO - MODEL series 480, 720 & 960 of Digital Temperature Indicator / Controllers available in ABS enclosure are low cost, accurate, rugged and reliable instruments suitable for general purpose temperature measuring and controlling applications. It accepts thermocouple or RTD as the sensing input and provides Relay / Solid State Relay control output for controlling the electrical or fuel fired heating or cooling system. The range covers simple Temperature Indicator, Single and dual set point ON/OFF or Time proportional Controllers. ApplicationFurnace / Oven / Refrigeration control Heat treatment Environmental chambers Plastic / Packaging industry Cold Storage and Chilling plants Laboratory equipment ..etc. Special model available for Infra red heaters.Optionally AvailableModel with dual input and dual set point Model with dual display to indicate PV & SVSimultaneously with single and dual set point control

• Brand Name: System Controls
• Temperature Range: 0-400 Deg C for J type Thermocouple Input
• Application: Rubber & Plastic Moulding Machine
• Power: 100 to 240 VAC
• Accuracy: 1% of Full Scale
• Type: Digital
• Size: 96*96 mm
• Weight: 750 gm
• Model Name/Number: DTC-PS
• Display Size: 0.56"
• Control Action: ON/OFF or Proposnal
• Warranty: 1Year

• Range: 50+1600°C

We offer wide range of Digital Temperature Controller

• Display Type: 4 Digit/7 Segment
• Brand Name: Honeywell
• Features: Easy to configure, Various Control algorithms, Dual display and Bargraph, Setpoint Programming
• Mounting Type: DIN Rail
• Model No.: DC1040CT-31200B-E
• Frequency: 50/60 Hz
• Size: 1/4 DIN

• Features: Highly demanded, Supreme strength, Easy installation

Libratherm offers Microcontroller based Humidity and Temperature Controller Model HTC-3003 with input and output suitable for measuring and controlling the T and RH of stability or environmental test chambers or walk-in chamber. These chambers are mainly used in Pharma, Petroleum, Chemical and Food Industries to test and store the product sample under the desired simulated and control climatic environment. The controller HTC-3003 accepts input from the standard T + RH sensors consisting of (Pt-100) temperature sensor and the capacitive type RH sensor or from direct T + RH sensor transmitter. (The suitable sensors or transmitters of international brands can be used along with this controller). The input signal is processed by 16 bit ADC for very accurate and stable display. The time tested PID algorithm gives accurate control of Temperature and %Rh. The single controller has advantage of tracking and synchronizing the two different process parameters over individual control for temperature and %RH.

The Series MDPC is a slim, gas pressure sensor that is small in size and light in weight. This pressure controller supports many installation methods and features high measurement accuracy. This small controller yields excellent stability, high shock and vibration resistance. The MDPC also provides good over-load capacity and heat resistance. It can be utilized in many industries such as: high-tech electronics, general processing, food packaging and automatic assembly. The MDPC features 6 user selectable pressure units and a large, LED 3-color display with selectable color options that allow for easy reading. Changing units is simple, and by using the included unit stickers, the pressure unit displayed becomes very clear. The fast parameter copy function makes copying parameters to other MDPC pressure controllers effortless. The key lock mode also prevents any unnecessary changes to the parameters, which can have an effect on the operation. Another characteristic of this multi-talented pressure controller is its ability to detect both positive and negative pressure. The MDPC is available in NPN, PNP, analog voltage or current output control modes.

• Application: Can be used for all fluids, air, steam, water, oil and gases, process between temperature span of 10 C to 70 C for indication & control
• Display indication: Process variable: 4 Digit 0.5” Seven Segment Red LED
• Accuracy: + / - 0.2 %, + / -1 Digit
• Mounting: Panel mounting
• Case Size: Cut-out size: 92mm X 92mm Outer dimension: 96mm X 96mm X160mm(depth)
• Input power supply: 230V AC / 115V AC Field selectable from back panel
• Output power supply: Transmitter: + 24V DC - 100 mA Relay: 2 nos. 1 C/O type 230V AC - 2 A

      Microcontroller (87c51) based unitOn-Board V to F converter (0 to 10 KHz) is provided Digitizing Analog InputZero & Full Scale programmable through front Key padSelectable Decimal Four Keys membrane Key Board on front panelConfiguration Data & Integrated Total are stored in serial NVRAMCalibration through software (Offset: CALZ & Span: CALS stored in NVRAM)RS232 / 485 serial outputRe-transmission: 4 to 20 mA

Radix Digital Controllers are highly reliable and long-lasting. Although both our digital and programmable controllers can be programmed for various setpoints via membrane keys or potentiometers, digital controller programming is hardware based and works best in applications requiring simplicity and ruggedness.  

Salient Features: - High Stability and Reliability - Special Controller for Cooling with time delay - Trip Controller for safety with manual acknowledge - Sensor failed Protection .

DU’s Temperature Controllers are easy to use.Best of all, no wiring is required.Just plug in the equipment whose operation needs to be controlled, place the sensor in the area to be controlled, and program the controller. The temperature controller can be used for heating or cooling applications. The controller turns off the heater or cooler when the liquid reaches the specified temperature and maintains the desired temperature using an efficient PID algorithm. These digital temperature controllers can be provided with or without digital timers.

The T3 has a few additional features which the other T3 series do not have due to a more advanced CPU. For example the faster scan rates for the inputs In on/off mode, inputs 3 through 10 can count pulses up to 1 khz on each channel.In analog mode, inputs 3thru 10 are 12 bits compared to the previous 12 bits, inputs 1 and 2 remain as 8 bits and slower at pulse counting. For developers there is a significant improvement with the larger om and ram space: 128k versus 64k for the flash space and 3k ram versus 1k of ram space compared to the earlier models. This gives more room for developers to add features such as Bacnet, PLC type logic, logging, etc. Secondly there’s an additional serial port, currently the port is unused but developers will be able to use the second port to manage a subnet of local sensors, keypads and displays for example, or use it in repeater mode to extend and isolate the RS485 main network.   Applications : The T3 Series are general purpose input / ouput modules for building integrators. Available in several input/output configurations, the T3 Series modules provide convenient termination for field devices and interfacing to your HVAC, lighting, temperature sensors, and other typical building automation applications. Each of the analog inputs can be jumper configured for signals of either 0-5V, 0-20mA, or dry contact. The outputs are available in dry contacts 1amp/output, 0-10V analog, and PNP sinking. The modules are slave devices that can be easily controlled via the RS485 serial interface using the industry standard Modbus Protocol. Highlights: • Surge-Protected Analog Inputs with 10-bit Resolution • Outputs can Individually be switched to ON, OFF, AUTO • High Impact Plastic Enclosure provides durability in commercial environments • Standard Modbus Protocol allows for up to 254 unique devices on one RS485 Network