Digital Indicator Dealers in Dahisar, Mumbai

HTM-3000-W-I – T + RH Indicator with Alarms and Integrated sensor – Wall mounting type HTM-3000-W-E – T + RH Indicator with Alarms and external sensor model HTS-220 with 2-meter cable – Wall mounting type

• Size: 1.1/4inch, 4/5inch, 5/6inch
• Certification: ISI certified
• Application: Tap Position
• Pressure: High Pressure
• Feature: Casting Approved, Durable
• Output: 4 to 20 Ma

We are engaged in offering Valve Position Indicator. Valve Position Indicator, that we offer, is used to monitor the position of the valve opening located in the water pipe lines especially in municipal corporations. The Valve Position Indicator can be used for any kind of valves like sluice valve, butterfly Valve, plunger valves etc. The display can be either in mm, cm, inches, feet, number of turns, degrees from 0 to 90, or any engineering unit. The input to the unit will be either potential free contacts or pulse or proximity. In case of power failure, a reading goes into memory mode automatically. Valve Position Indicator, that we provide, has got an output 4 to 20 MA, which is optional.

Libratherm offers simple Digital Process Indicator Controller, which are low cost, accurate, rugged and reliable instruments available for indication and single and dual set point OnOff control for general-purpose process control applications. Indicators are available in display sizes of 0.5” to 4” for panel mounting and shop floor installations. Models featured here can be used to monitor and control the various industrial process parameters such as ACDC voltage and current, Pressure, Load, pH, ORP, Conductivity, RPM, Flow, Level, Humidity etc. Single and Two set points with relay outputs are provided for control or alarms.

• Size: As given in the above table - 72 x72, 96 x 48, 96 x 96, 192 x 96 mm
• Input: AC/DC voltage and Current, process signal of 4-20mA, 0-1VDC, 0-5VDC, 0-10VDC ( please refer to Input and Range selection table in PDF catalogue).
• Accuracy: Indicating accuracy better than ± 0.2 % of the specified range
• Display: 3.5 digits or 4.5 digits 0.5” Red 7-segment LED display. Other Display sizes are model dependent as given in the above tables.
• Range Calibration: User accessible ZERO and SPAN presets to calibrate the desired range of display proportional to input.
• Set point    : Single or Dual - adjustable using front panel multi-turn potentiometers with push to read membrane switches.  For Low Alarm and / or High Alarm outputs.
• Type of Control Outputs: a) Relay changeover contacts (rated for 6A @ 230VAC) and b) Solid state relay driver (0 to 10) VDC logic pulse.
• Hysterisis (Fixed)  : 2 counts for ON/OFF action (for 1 count resolution controller) 0.3 count for ON/OFF action (for 0.1 count resolution controller)
• Supply     : 230 VAC or 110VAC 50/60Hz (5VA max)
• Panel Cutout: 68 x 68, 92 x 44, 92 x 92, 186 x 92 mm ± 0.5 mm.
• Enclosure: ABS Plastic /Metal powder coated with polycarbonate front, Aluminum Die cast housing for flame proof enclosures, Metal enclosures for large display.

• Brand Name: Sai Control
• Country of Origin: Made in India
• Material: Cast Iron
• Surface treatment: Polished
• Grade Protection: IP65
• Model Name/Number: BLM-5512
• Frequency: 50 Hz
• Output Voltage: 24 Volt
• Input Voltage: 230V AC
• Current Rating: 10 A

• Country of Origin: Made in India
• Display Type: Analog
• Model Name/Number: FR1
• I Deal In: New Only
• Packing: Box
• Usage/Application: Industrial

• Range: 0-1200°c
• Range : : 0-1200°c
• Sensor :: Cr/AL(K), Fe/cu(j) or PT-100 / (RTD), 2 Wire, 3 wire etc.
• No.of Points :: 1,6, (8,12 in Double DIN)
• Display :: 31/2 Digit LED of 0.5" Height
• Accuracy :: +/- 1% FSD
• Channel Selections :: Rotary Switch
• Cold Junctions :: Automatic Compensation
• Front Dimension :: 96x96 mm. DIN
• Panel Cut-out :: 92x92 mm.

Digital Linearized Temperature Indicator, Oven Temperature Indicator

loop-powered indicators, Temperature Controllers, temperature scanners

Digital Bar Graph Indicator, Automatic Drain Filters