Digital Pressure Transducers Dealers in Mumbai

• Country of Origin: Made in India
• Brand: Atlas Copco
• Size: Small
• Operating Temperature: -40 to 105 Deg C
• IP Protection Class: IP67
• Packaging Type: Box
• Torque: 40 Nm

We are bracketed among the trusted Suppliers of Industrial Pressure Transducers. The Pressure Transducers offered by us with reverse polarity protection on input and short circuit protection on output. Our range of Transducers is extensively used in refrigeration systems, automotive test stands, agricultural equipment, etc. Buyers can obtain it competitive rates from us.

  Capacity: 50 to 1000bar Load Direction: Gauge Pressure | Pressure Gauge Type: Deflecting type Diaphgram Pressure Sensor Description: Strain gage based design, S.S. construction for corrosive and hygienic applications, Vide selection of pressure range, Suitable for liquid & gas, 1/4" (6.35 mm) 1/2" (12.7 mm) BSP Male/Female thread available.   Features: Stainless Steel 17-4 PH construction Available up to 500 bar pressure Accuracy better than 0.25% Easy for installation   Industries: Manufacturing, Energy, Construction Machineries, Automotive, Automation Machineries, Assembly Lines, Agriculture, Aerospace Applications: Automotive Research, Brake Force Measurement, Differential Pressure Sensing, Hydraulic Press Testing, Process Control & Automation, Refrigeration , Compressor & Pump Pressure Measurement, Tank Level Measurement, Truck Weighing  

We are a Dealer, Supplier of Keller. We stock and supply running models are Keller Pressure Transducers, Keller OEM Pressure Transmitters, Keller Intrinsically Safe Pr. Transmitters for Hazardous Applications, Keller Submersible Level Transmitters, Keller High Precision Digital Pr. Gauges, Keller Pneumatic & Hydraulic Pressure Calibratorsa. We are supplier in India, Mumbai, Delhi, Ahmadabad, Chennai, Pune, Nashik, Vapi, Aurangabad, Nagpur, Sangli, Satara, Ichalkarnji, Solapur, Kupwad, Kolhapur, Pimpri, Chinchwad, Jalgaon, Silvassa, Surat, Baroda, Morbi, UAE, Indore, Bhopal, Gurgaon, Faridabad, Ghaziabad, Noida, Coimbatore.  

• Features: Low and High Level Output , All Welded Construction
• Applications: Hydraulic Pressure Monitoring , Torpedo Depth Sensing

P700 series pressure transducers are designed for high reliability and stability. The all welded construction incorporates a double cantilever beam with bonded foil strain gauges. Coupling to the pressure diaphragm via a force rod, gives excellent thermal isolation from the fluid or gas being measured. High overload protection is an integral part of the design. These units are capable of sensing extremely small changes of applied pressure and are relatively insensitive to vibration, altitude and shock.

• Accuracy: +-0.25 %FSS
• Brand: Honeywell
• Current Rating: 3A
• Model Name/Number: Honeywell's PX3 Series Heavy Duty Pressure Transducers
• Ambient Temperature: -40 C to 125 C [-40 F to 257 F]
• Ce Conformity: Yes
• Mounting Type: Brass housing and Metri-Pack 150,DIN,or cable harness electrical connections
• Short Circuit Protection: Yes

We are offering Pressure Transducers.

• Pressure Range: 0-3.5MPa--0-150MPa(0-500psi---0-30000psi)
• Over Pressure: 1.5 X FSO
• Max Diaphragm Temperature: 400oC

MA1200 Series Economic melt Pressure Transducer designed for economic applications. The model MA1200 and MA1300 are introduced with automatic zero adjustment. This series can be used together with the PVI Series Intelligent Digital Pressure Instrument of Omicron or other brand instrumentation. Zero & full span can be adjustable externally if required, with amplify signal can be connected with PLC. With the advantage of high precision and reliable pressure measuring and good quality, internal 80% calibration and etc.

• Features: Serial interface, Analog monitor output, Single-loop control, Weatherproof housing, Digital display available
• Capacity: up to 15 scfm
• Applications: Component pressure testing, Gripper control, Welding operations, Actuator control.

The PT460E Series transducer is a ±0.5% sensor ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mVV signal designed to work with most pressure indicators. The PT460E comes equipped with a six pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460E features a 12-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

PRESSURE TRANSDUCER, 0 to DC 100mV 6 models : 2/5/10/20/50/100/400 bar. Zero pressure - 0 DCV, Full scale - 100 mV. Power supply : DC 9V to 30V. 4 wires : 2 wires for power, two wires for signal.

• Accuracy: 0.20 % FS
• Brand: Jupiter
• Part Number: P1200
• Suitable Media: Liquid
• Pressure Range: 75 psi to 10,000 psi
• Supply Voltage: 10-12 V
• Process Connection: Screw Terminals
• Operating Temperature: -20 to 80 Deg C
• Frequency response: 2.5 to 40 kHz
• Insulation Resistance: 500 M Ohm at 50 VDC
• Contact System Type: TPST

The Series 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10" w.c. up to 400" w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications.

Available versions: Standard; ATEX; CSA; Schiff & Offshore; with front-flush diaphragm The The pressure transducer series HDA 4300 is equipped with a ceramic pressure measurement cell with thick-layer DMS, which was specially developed for relative pressure measurement in the low-pressure range. The 4 ... 20 mA or 0 ... 10V enable the connection to all measurement and control devices of HYDAC ELECTRONIC GmbH and the linkage to commercially available control and regulation units. The variant with the front-flush diaphragm was specially developed for applications in which the media used could lead to a blockage, gumming-up or freezing of a standard pressure connection. The main areas of application lie in the low-pressure ranges of hydraulics and pneumatics, particularly in refrigeration and air-conditioning, food and pharmaceutical industry applications. Further applications include processes where the medium changes frequently and any residues could cause mixing or contamination of the media.

• Linear volume flow rate actual value: 0 – 10 V DC or 2 – 10 V DC

Standard filtration in comfort air conditioning systems allows for use of the transmitter in the supply air without additional dust protection. Since a partial volume flow is passed through the differential pressure transducer in order to measure the volume flow rate, please note:With heavy dust levels in the room, suitable extract air filters must be provided.If the air is polluted with fluff or sticky particles, or if it contains aggressive media, dynamic pressure transducers cannot be used

Smart sensors and transducers limited have launched strain gauge based digital pressure transducer . The product design features include stainless steel design. These are manufactured in four series viz. precision (p), general purpose (gp) and low cost (lc) depending on accuracies of 0.25 %, 0.5%, 1% respectively. Because of their stainless steel construction (including wetted parts), these sensors are industrially rugged and highly reliable. These units measure a range of pressure from -1 kgcm2 to 1000 kgcm2. Pressure transducer are available in four different accuracies with temperature ranges from 0 to 80 deg c. The compact size makes them light weight and adaptable to be accumulated in locations where space restrictions pose problem. Being strain gage based, they are suitable for dynamic pressure monitoring, in addition to the conventional static pressure monitoring. The pressure transducer have wide application in process industries such as chemical and petrochemical, food, fertilizers, steel and cement plants, flow measurements, depth sensing and level measurements.

Disposable Pressure Transducer, Transducer Protector, Conductivity Sensor

M3 Melt Pressure Transducer, 1 Position Magnetic Latching Solenoid

Smart Sensors And Transducers Limited have launched strain gauge based digital pressure transducer . The product design features include stainless steel design. These are manufactured in four series viz.

Pressure Transducers, Flow Meters, Instrumentation Products, Load Cells

Honeywell Pressure Transducer, copper contacts, Flexible Copper Connectors

Wet Differential Pressure Transducers, Explosion Proof Pressure Switch

Extrusion Melt-pressure Transducer, Symmetrical Gravimetric Analyser

Pressure Transducer, sensor, Water Flow Meter, Electromagnetic Flow Meter

Pressure Transducers, aircraft components, Carpet, leather seat cover

Honeywell Pressure Transducers, petrochemical plants, biofuels

Digital Pressure Transducers, Hydraulic Pipe Fittings, waste water pumps

Pressure Transducer / Transmitters, Lube Oil Filtration Systems

Pressure Transducer

Digitally Compensated Pressure Transducer, Dell Branded PC