Digital Temperature Controller Dealers in Mumbai

• Application: Control Panel
• Condition: New
• Warranty: 1 Year
• Graphics Card Type: Integrated
• RAM: Up to 16 GB
• Processor: i3, i5, i7
• Ports: RS232, RS485, I2C, SPI, USB Communication

Digital Temperature Controller heat or cold generators (with manual and programmable automatic defrosting).Temperature display and adjustment. All purpose temperature controller. Front panel functions :- Relay ON Indicator. Defrost Indicator Alarm Indicator Timer Indicator Keypad Lock Indicator

• Type: Digital Temperature Controller
• Application: Industrial
• Weight: 400-800gm
• Color: Black
• Feature: Auto Controller, High Performance, Stable Performance
• Condition: New
• Display Type: Digital
• Theory: Temperature Controller
• Frequency: 50Hz

setpoint and process both are displayed simultaneously. the process display is 12.5mm height. the setpoint display is 8mm height. the power supply is 90-260 vac. notes 1. on-off control: relay is on upto the set temperature and cuts off at the set point. system temperature will come down and again relay will go on at temperature 2 °c below the set point. same function is repeated. adjustable dead band is provided for specific application. time-proportionating control : relay will be on and off in band of ±2 °c of set-point. on-off : time will adjust as per the heat requirement of the system. of course total time cycle will be of 15 seconds. 2. 4½ digit temperature indicator/controller nippon 2020a. 3. contact factory for supply volts of 90 - 260 vac & retransmission output     principle  :  input signal is signal conditioned, linearised and amplified.  it is compared with the set point and accordingly relay operates.   inputs  :  j,k,r,s,t and other thermocouples, r.t.d's like pt-50, pt-100 (2~3 wire), 0-1vdc, 4-20 ma... etc. range, indicating  : refer table - a accuracy, resolution ambient compensation: automatic  setting  : by push button - coarse/fine pots or by membrane key - trimpot setting accuracy : better than 0.2% output  : relay contacts rated at 230v/6a. control  : on-off or time-proportional (refer note on back side)  sensor open protection: built-in indicates ' 1', relay cuts-off.  ambient temperature:  0-55 °c supply :  230 vac ±10%, 50 hz standard, 90-260 vac on request. box size  :  96 (h) x 96 (w) x 180 (d) or  72 (h) x 72 (w) x 110 (d) or  48 (h) x 48 (w) x 100 (d) in mm note : 24 vdc for loop power 4-20 ma input on re

• Application: Green Room
• Voltage: 230 VAC
• Frequency: 50 Hz
• Phase: Single/Three Phase
• Degree Of Protection: IP22
• Temperature Range: 20 to 80 Degree Celsius
• RH: 10-95%, Non-condensing

Advanced Micro-controller based Single input Input RTD-PT 100 0.2% full scale accuracy 0.1% linearity Water level input with Audio visual alarm Programmable sock time Relay output for pressure released valve Manual start stop Supplyv: 12VDC to 36VDC

• Power: 230V AC ± 15%, 50/60 Hz
• Size: 96 x 96 x 110mm, 48 x 96 x 150mm

Digital temperature controller, The Dimension are 96 X 96 X 150mm. Other related products manufactured are Potentiometric type controllers withwithout deviation indicator, Portable and Mains operated temperature indicators.Display : 4.5 Digit, 12.5mm Red Led. Range : 100 0C to 1700 0C in various models Resolution : 0.1 0C or 1 0C Accuracy : Better than 0.25 % ± 1 digit Sensor : Suitable for RTD (pt100), thermocouple (Type J, K, R, S, T), solid state Sensors.

• Brand Name: PPC
• Driven Type: Electric
• Current Type: AC
• Color: Black
• Condition: New
• Power: 220V
• Application: Industrial
• Size: 72(w)* 72(h)* 110 (d) Mm (cutout- 68*68mm) 48(w)* 96(h)* 110 (d) Mm (cutout- 46*92mm) 96(w)* 96(h)* 110 (d)mm (cutout - 92*92 Mm)
• Model Number: ppc-dtc
• Feature: High Performance
• Voltage: 230
• Display Type: Digital
• Type: Digital Temperature Controller, FE-CON(J) / CR-AL (K) / PT-100 (RTD)
• Weight: .200-400gm
• Theory: Temperature Controller
• Frequency: 50Hz
• Temperature Range: 0-400C
• Resolution: 1
• Accuracy: 1
• Country of Origin: India
• RANGE: 0 -60.0/100/250/400/600/1200 degree centigrade,
• OUTPUT: TIME PROPORTIONAL / ON-OFF - RELAY- 6A/10A ( 1C/O) / SSR
• SETTING: POTENTIOMETRIC SETTING (PUSH TO SET ),
• DISPLAY: 3 ½ DIGIT, 7 SEGMENT DISPLAY,
• POWER SUPPLY: 230 VAC / 50 HZ

• Brand Name: West Control Solutions
• Model Name/Number: 6100+ & 8100+ & 4100+
• Enclosure: IP66
• Certifications: CE,UL,ULC,CSA
• Sampling Time: 4 per second,14 bit resolution approximately
• Output Type: Relay,SSd,DC linear V or mA,Triac,24V transmitter power supply
• Product Category: Single Loop Controller
• Dimensions and Size: 48mm x 48mm x 110mm (HxWxD),1/16 DIN; 96mm x 48mm x 100mm,1/8 DIN; 96mm x 96mm x 100mm,1/4 DIN
• Primary Input Type: Universal (TC,RTD,DC linear mA/mV)
• Other Inputs: Digital,Remote setpoint
• Max. Number of Outputs: 3
• Control Type: PID,ON/OFF,Manual,Alarm,Ramp to Setpoint
• Power Supply: 100-240V AC 50-60Hz,20-48V AC 50/60 Hz,22-65V DC
• Communicatons: RS-485 serial (West ASCII or MODBUS)
• Panel Sealing: IEC IP66,NEMA4X

• Size: 96 x 96 mm
• Frequency: 50 Hz
• Model No.: MDC Series
• Control Type: PID/On-Off
• Input Type: Thermocouple, RTD, Current (mA), Voltage (mV)
• Control output Type: Relay/SSR, Analog (mA/mV)
• Brand: Multispan

we manufacture and supply high grade digital temperature controller. Our digital temperature controllers are designed to measure, display and control temperature of furnaces over wide range, with high accuracy. Different digital temperature controller sensors are used for the desired temperature control range. In our digital temperature controller, uses of proportional controller minimize overshoot and undershoot of the furnace. The measured temperature is displayed on a digital led display of our digital temperature controller. features of digital temperature controller automatic cold junction compensation (thermocouples)broken sensor indication & sensor linearizationusing dfg techniques are the standard features

• Voltage: 110-230 VAC
• Frequency: 50/60 Hz
• Brand Name: EEC
• Size: 48 x 48 mm
• Control Type: On-Off
• Input Type: RTD, Thermocouple

• Brand Name: Texas Star
• Size: 48 x 48 mm
• Temperature Range: 2 Line- 7 Segment
• Display Type: LCD
• Voltage: 100V
• Frequency: 50Hz
• Model No.: DX350 HDV
• Control Type: PID/On-Off
• Usage/Application: Electrical Fitting

Libratherm offers Microprocessor based one to eight loop PID Temperature Controller (Model PID- 8000) for processes requiring multiple zones heating or heating plus cooling control. It is most suitable for difficult process, which results in frequent system disturbances, and applications where simultaneous and accurate temperature control of number of heatingcooling zone is required. It also eliminates the need for number of individual PID or ONOFF Temperature Controllers thereby saves on cost. PID-8000 can accept 8 similar type of Thermocouples or RTD (Pt-100) inputs and can provide switching PID or ONOFF Control output in the form of DC Pulses or SSR Drivers for heating and cooling. It can also simultaneously provide 8 analog PID control Outputs in the form of (4-20mA) or (0-5) volt, which can be used to drive external SCR Heater Power Controller or other actuators. Open or Faulty sensor indications for each zone is also displayed with the respective Zone No. Each zone loop parameters like PID, SET, Hysterisis, Power Limit and Ramp Time values can be independently programmed from the user-friendly front panel membrane keyboard. Features:  Microprocessor based design.  Elegant looks and Very easy to operate.  Accepts all types of maximum 8 inputs.  PID or ON Off heat and cool action per channel.  All zones are individually configurable for Heat or Cool.  Compact in size – ½ DIN (192 x 96 x 200 mm).

Salient Features: - High Stability and Reliability - Special Controller for Cooling with time delay - Trip Controller for safety with manual acknowledge - Sensor failed Protection .

Radix Digital Controllers are highly reliable and long-lasting. Although both our digital and programmable controllers can be programmed for various setpoints via membrane keys or potentiometers, digital controller programming is hardware based and works best in applications requiring simplicity and ruggedness.  

• Frequency: 50/60 Hz
• Display Type: 4 Digit/7 Segment
• Voltage: 110- 230 V AC
• Resolution: 0.1°C.
• Accuracy: ±1°C (-50 – 70°C).
• Mounting Type: Wall
• Control Type: On-Off
• Brand: Selec
• Temperature measuring range: -50 – 99°C.
• Sensor error delay: 1 minute.
• Power supply: 220 VAC±10%, 50/60Hz
• Power consumption: ≤3 W.
• Sensor: NTC sensor (1PC).
• Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC.
• Ambient temperature: 0 – 60°C.
• Storage temperature: -30 – 75°C.
• Relative humidity: 20% – 85% (No condensate).
• Front panel size: 75(L) x 34.5(W)(mm)
• Mounting size: 71(L) x 29(W)mm.
• sensor length: 1m (include the probe).
• Product size: 75(L) x 34.5(W) x 85(D)mm.
• Package includes: 1 x 220V Mini Digital Temperature Controller. 1 x Temperature sensor probe with cable. 1 x Instruction Manual.

• Brand Name: System Controls
• Temperature Range: 0-400 Deg C for J type Thermocouple Input
• Application: Rubber & Plastic Moulding Machine
• Power: 100 to 240 VAC
• Accuracy: 1% of Full Scale
• Type: Digital
• Size: 96*96 mm
• Weight: 750 gm
• Model Name/Number: DTC-PS
• Display Size: 0.56"
• Control Action: ON/OFF or Proposnal
• Warranty: 1Year

• Brand Name: DIXELL
• Display Type: Digital
• Model: XR02CX