Dipti Enterprises Goregaon East, Mumbai, Maharashtra

Complex or unusual shapes. Reduced weight. A cost effective alternative.

Type : Wire Springs

Material : Metal, Steel

Style : Coil

Thickness : 0-5-10mm, 10-15mm, 15-20mm

Application : Industrial

Grade : AISI, ASTM, BS, JIS

Color : Black, Blue, Grey, Golden

Feature : Corrosion Proof, Durable, Easy To Fit

Wire Diameter : 20-40mm

Country of Origin : India

Brand Name : WIRE FORMING

Physical parameters: d (wire diameter): This parameter describes the diameter of wire used as Torsion springs, whose ends are rotated in angular deflection, offer resistance to externally applied torque. The wire itself is subjected to bending stresses rather than torsional stresses, as might be expected from the name.

Length : 6 - 30 Inch

Packaging Type : Box

Wire Diameter : 20-40mm

Specialities : High Strength, Finely Finished, Easy To Fit

Material : Steel

Shape : Spiral

Finishing : Polished

Material : Steel

Application : Industrial

Feature : Corrosion Proof, Finely Finished

Finishing : Polished

Wire Diameter : 1 - 10 Mm

Material : Metal

Shape : Round

Application : Industrial Use

Grade : AISI, ASTM, BS

Color : Grey

Feature : Corrosion Proof, Durable, Easy To Fit

Finishing : Polished

Physical parameters: d (wire diameter): This parameter describes the diameter of wire used as material for spring. De (Larger External Diameter): External diameter at large end of the spring. Tolerance for this parameter is (+-)2%(indicative). Ds (Smaller Internal Diameter): Internal diameter at small end of the spring. Tolerance for this parameter is (+-)2%(indicative) L0 (free length): Free length of compression springs is measured in its uncompressed state after previous one time blocking. Tolerance for this parameter is (+-)2%(indicative). R (spring rate): This parameter determines spring’s resistance, while it is working. It is measured in 1 DaN/mm = 10 N/mm. Tolerance for this parameter is (+-)15%(indicative). P- Pitch means centre distance between two coils.. L1 & F1 (length at force F): Force F1 at length L1 can be calculated from equation : F1 = (L0-L1) * R. Equation derrived from previous for calculating L1 : L1 = L0 – F1/R.   Compression springs are often specified where the large end is meant to work in a bore and the small end is meant to work over a rod. They offer the advantage of a reduced solid height compared to straight compression springs, especially when capable of “telescoping.”   Conical Springs are Cone shaped compression springs designed to provide a near constant spring rate and a solid height lower than a normal spring. Each spring features a variable pitch to achieve the constant spring rate and coils which nest during deflection to provide a solid height approximately equal to two wire diameters.   Some uses for conical compression springs are as follows: Small Solid Height: A Conical spring can be designed so that each active coil fits within the next coil, so the solid height can be equal to one or two thicknesses of wire. This is useful where the solid height is limited. Variable Rate: These springs offer a constant, or uniform pitch, and have an increasing force rate instead of a constant force rate (regular compression springs). The larger coils gradually begin to bottom as a force is applied. A variable pitch can be designed to give a uniform rate if necessary. Stability: Conical compression offers more lateral stability and less tendency to buckle than regular compression springs. Vibration: Resonance and vibration is reduced because Conical Compression springs have a uniform pitch and an increasing natural period of vibration (instead of a constant) as each coil bottoms.

Packaging Type : Box

Wire Diameter : 20-40mm

Feature : Optimum Quality, High Strength

Material : Steel

Shape : Round

Finishing : Polished

Material : Metal

Application : Industrial Use

Grade : AISI, ASTM

Color : Black

Feature : Corrosion Proof, Easy To Fit, Finely Finished

Finishing : Polished

Material : Steel

Application : Industrial

Color : Silver

Feature : Corrosion Proof, Finely Finished

Finishing : Polished

Physical properties: d (wire diameter): This parameter describes the diameter of wire used as material for spring. De (External Diameter): External diameter at large end of the spring. Tolerance for this parameter is (+-)2%(indicative). Ds (Internal Diameter): Internal diameter at small end of the spring. Tolerance for this parameter is (+-)2%(indicative) B.L (Body length): Body length of Extension springs is measured in its uncompressed state Tolerance for this parameter is (+-)2%(indicative). F.L (Free length) : Free length means distance between two hooks .(Inside Hooks) R (spring rate): This parameter determines spring’s resistance, while it is working. It is measured in 1 DaN/mm = 10 N/mm. Tolerance for this parameter is (+-)15%(indicative).

Material : Stainless Steel

Length : 100-200mm

Application : Industrial Use

Color : Black, Grey, Silver

Feature : Corrosion Proof, Excellent Quality, Fine Finishing

Standard : AISI, ASTM, BS, DIN

Physical Parameters: d (wire diameter): This parameter describes the diameter of wire used as material for spring. De (External Diameter): External diameter at large end of the spring. Tolerance for this parameter is (+-)2%(indicative). Ds (Internal Diameter): Internal diameter at small end of the spring. Tolerance for this parameter is (+-)2%(indicative) Ln (Block): Maximal length of a spring after total blocking. For most conical springs this value equals double wire diameter. Tolerance for this parameter is (+-)2%(indicative). L0 (free length): Free length of compression springs is measured in its uncompressed state after previous one time blocking. Tolerance for this parameter is (+-)2%(indicative). R (spring rate): This parameter determines spring’s resistance, while it is working. It is measured in 1 DaN/mm = 10 N/mm. Tolerance for this parameter is (+-)15%(indicative).P– Pitch means centre distance between two coils F– is the deflection. L1 & F1 (length at force F): Force F1 at length L1 can be calculated from equation : F1 = (L0-L1) * R. Equation derrived from previous for calculating L1 : L1 = L0 – F1/R.   Compression springs are often specified where the large end is meant to work in a bore and the small end is meant to work over a rod. They offer the advantage of a reduced solid height compared to straight compression springs, especially when capable of “telescoping.”   Conical Springs are Cone shaped compression springs designed to provide a near constant spring rate and a solid height lower than a normal spring. Each spring features a variable pitch to achieve the constant spring rate and coils which nest during deflection to provide a solid height approximately equal to two wire diameters.   Some uses for conical compression springs are as follows: Small Solid Height: A Conical spring can be designed so that each active coil fits within the next coil, so the solid height can be equal to one or two thicknesses of wire. This is useful where the solid height is limited. Variable Rate: These springs offer a constant, or uniform pitch, and have an increasing force rate instead of a constant force rate (regular compression springs). The larger coils gradually begin to bottom as a force is applied. A variable pitch can be designed to give a uniform rate if necessary. Stability: Conical compression offers more lateral stability and less tendency to buckle than regular compression springs. Vibration: Resonance and vibration is reduced because Conical Compression springs have a uniform pitch and an increasing natural period of vibration (instead of a constant) as each coil bottoms.

Material : Stainless Steel

Shape : Conical

Application : Industrial Use, Vehicles Use

Feature : Easy To Fit, Finely Finished

Finishing : Polished

Compression springs small range to large range.

Type : Compression Springs

Material : Iron, Metal, Steel

Shape : Round

Thickness : 0-5-10mm, 10-15mm, 15-20mm

Application : Industrial Use, Vehicles Use

Grade : AISI, ASTM, DIN, GB, JIS

Color : All

Feature : Corrosion Proof, Durable, Easy To Fit, Finely Finished, High Strength, Optimum Quality

Finishing : Non Polished, Polished

Wire Diametert : 20-40mm, 0.2 to 10 mm

Country of Origin : India