DM Water Plant Dealers in Mumbai

• Application: Commercial Application, Purification for Drinking
• Automation Grade: Automatic
• Installation Service: No
• Capacity (LPH): 1000 LPH, 2000 LPH, 500 LPH
• Material of Construction: SS Powder Coating, FRP

Special Features Instantaneous flow rates up to 20 m3/h provide up to 400 m3/day on a feed water of 100 ppm total anion feed. Average resistivity of purified water is 0.5 mS/cm, with low running costs. High chemical efficiency - high purified water output from low regenerate chemical usage. Smaller footprint and higher flow rates than conventional plant. 30 minute regeneration time. Reduced outage time can often eliminate the need for duplex plant. Near neutral effluent reduces disposal costs. Stainless steel process pump fitted as standard Automatic control by PLC Message display provides continuous read out of system status Flow display provides information on flow rates, throughput and number of regenerations. Audible alarm and 'no flow' alarm circuit Can be connected to level sensors in chemical tanks to prevent regeneration when insufficient chemicals are available. Minimal installation and commissioning costs.

• Application: Treating Hard Water
• Weight: 100-1000kg
• Color: Metallic
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 2years

We are offering excellence in the form of Water Demineralization Plant to enhance the buyers' content. Get in touch with us for placing small as well as bulk orders, timely deliveries will be straight to your doorstep! Our water demineralization plant is designed for superior performance, corrosion resistance, easy operation and low maintenance.

• Capacity: 50lph to 25m3/hr
• Place of Origin: India
• Mild steel pressure vessels internally lined with rubber/FRP provided with internal fittings and initial charge of cation and anion exchange resin.: One set of regeneration equipment including hydraulic ejectors, acid & alkali tanks.One set of regeneration equipment including hydraulic ejectors, acid & alkali tanks
• One set of frontal pipework & valves: One mild steel base frame for mounting cation & anion units

We offer mb dm plant. Mix bed dm plant comprise of one mild steel rubber-linedfrp pressure vessels filled with strong acidic cation exchange resin and strongly basic anion exchange resin in mixed form. They are available in a range of diameters. Mix bed dm plant is usually used as polishing unit at outlet of two bed dm plant ro plant. The modular construction permits flexibility in the selection of cation and anion units to cater to different types of raw water. Treated water of conductivity less than 1 microsiemencm with ph of 6.5 to 7.5 is achieved at mix bed dm plant outlet.

Water Demineralization Plant uses the demineralization process by which the mineral slats are removed from water using the ion exchange process. Synthetic, cation resin exchanges hydrogen ions (H+) for positive ions, and anion resin exchanges hydroxide ions (OH-) for negative ions. Water quality from demineralization systems is typically around 1 part per million (ppm). We offer single and separate-bed Water Demineralization Plant for improved water quality. Using the ion exchange process in which calcium and magnesium ions are exchanged with sodium ions, the water softeners eliminate scaling and residues on industrial equipment and boilers. We offer a wide range of Water Demineralization Plant for industrial and commercial use.

Being the leading names in the industry, we offer our clients functionally advanced range of De Mineralisation Plants that are acclaimed among the clients for durable standards. They re performance oriented and requires minimum maintenance. We offer them in varied technical grades and are treasured for high strength and wide industrial applications. Features: High tensile strength Robust design Safe to use

• Type: Dm Plant
• Application: Treating Hard Water
• Certification: CE Certified, ISO 9001:2008
• Color: Black, Blue, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual
• Driven Type: Electric
• Warranty: 1year, 2years

Aguapuro is engaged in manufacturing best quality Mixed Bed DM Plants, which are manufactured using mild steel that ensure high durability. Our range of Mixed Bed DM Plants can be availed in various sizes ranging from 500 ltrs/hr up to 140 m3/hr and above to fulfill the requirements of the buyers. Advantages Sturdy construction High performance Easy to maintain Easy to install Well packed Treated Water Quality The outlet of the unit is having conductivity less than 1  2 micro siemens/cm with neutral ph

• Application: Industrial
• Voltage: 230 V
• Brand Name: AST
• Type: Dm Water Plant
• Water Source: MIDC,CORPORATION
• Flow Rate: 100 LPH
• Automation Grade: Semi-Automatic
• Material of Construction: FRP
• Frequency: 50-60 Hz
• Phase: Single

We manufacture DM Plant that is fabricated using superior grade raw material in the production process making them durable. Each vessel has chambers that are capable of standing high atmospheric pressures, making the vessels long-lasting. Our DM Plant is manufactured using the latest scientific techniques to make it effective while de-mineralizing water easily. We manufacture and source the components from reliable vendors to make for an efficient filtering mechanism inside the DM Plant that is very effectual in operation. Uses : Pharmaceutical industryFood processing industryEffluent treatmentElectronic industryBreweriesBeverage industry The range of cation and anion exchange units are up to a flow rate of 9.7m3/hr and the units employ both normal and counter-flow regeneration. These smaller standard units are skid mounted. For smaller units material of construction can be moulded FRP and for larger units SS or MS with or without rubber lining. Control valves are 5-cycle multi part valve and for larger units, a frontal manifold with individual corrosion-resistant valves. System can be manual, semiautomatic or automatic depending upon the requirement of client. The larger units are designed and manufactured to suit the client's requirements. The larger units typically can cope with flow rates up to 100m3/hr. Acid and caustic used for regeneration of the anion and cation resins. For ultra-pure water, additional mixed bed polishers can be provided depending upon the applications.

Demineralised Water systems produces high quality water free from any kind of minerals. It operates on the principle of ion exchange, degasification and polishing for treating water and removing ions. Demineralization technology is one of the cost effective solutions for treatment of water. These systems are widely used to treat water in the field of steam, power, process, and cooling. Varieties of Demineralized Water Systems: Constructed with FRP, MS, MSRL or SS vessels Available in Automatic and manual mode Integrated with Multiport and individual valve

• Capacity: Up to 1000 m3 / hrs & more
• Material of construction :: Fiber reinforced plastic (FRP)
• Features: Fully assembled & tested,Variety of cost effective standard models,Quick availability

We are providing highly proven and effective dm water plant, which is highly resilient and robust in built. In this, the process of removing the mineral salts from water by ion-exchange is done. Generally, all natural water has electrolytes in varying concentrations and ion-exchange vessel holds ion-exchange resin of the required type through which water is allowed to pass. The selective ions in the water are exchanged with ions or radicals loosely held by the resin. In this way, the water is passed through several vessels or a mixed bed vessel so that both positive and negative ions are removed and water is demineralised. It is the most effective way of demineralizing water and is used in various industries.

We have established ourselves in the midst of leading Water Treatment Plant Manufacturers & Suppliers in India. One can avail from us a wide variety of Industrial Water Treatment Plant that is used in various industries for the purpose of water purification. We use only optimum quality Stainless Steel and Mild Steel for the manufacturing of Water Treatment Plants so as to ensure high performance and durability. Rugged construction and simple installation are the additional features of our Water Treatment Plants. Lastly, we also manufacture Water Treatment Plants as per the specification of customers.

Ion exchange technology is used to remove salts (cations and anions) from the water Soluble chemical compounds, when dissolved in water, become ionized; that is their molecules dissociate into positively and negatively charged components called ions. Consider common table salt, sodium chloride. In its solid form, this compound consists of one sodium atom (Na) and one chlorine atom (Cl) tightly coupled together (NaCl). When dissolved in water, however, the compound splits into two ions, Na and Cl. Ion Exchange A process in which Contaminant ions are exchanged from water is called ion exchange. This process occurs in ion exchange resin Initially, resin is loaded with hydrogen (H ) ion for cations and hydroxide (OH-) ion for anions. As water passes through the resin, the contaminant ions in the water displace the loaded ions from the sites on the resin. This is because the resin has a greater affinity for the contaminant ions. Affinity for most resins is based loosely on ionic size and charge

The company has emerged amongst the topmost Manufacturers and Suppliers of Water Demineralization Plant. Water Demineralization Plant uses ion exchange process during the processes for removal of dissolved solids or minerals from the water. We employ the latest engineering techniques with high precision while manufacturing Water Demineralization Plant. Water Demineralization Plant, offered by us, finds its application in oil and gas sector, pharmaceutical industry, chemical industry and many more. Additional Information The ion-exchange process involves two stages of demineralization : Removal of cations from the water by the cation exchange process.Removal of anions from water by the anion exchange process.

DM plant consists of two Beds (Cation & Anion) and Mixed Bed Water Quality (Conductivity) from Two Bed Outlet will be between 15 to 20 micro siemens. Water Quality (Conductivity) from Mixed Bed Outlet will be less than 1 micro siemens. First raw water is passed through the cation resins column (H+ form), which converts all ionized salts to the equivalent mineral acids.

DM Plant is an Ion exchange technology used to remove salts (cations and anions) from water. Soluble chemical compounds, when dissolved in water, become ionized; that is their molecules dissociate into positively and negatively charged components called ions. Consider common table salt, sodium chloride. In its solid form, this compound consists of one sodium atom (Na) and one chlorine atom (Cl) tightly coupled together (NaCl). When dissolved in water, however, the compound splits into two ions Na+ and Cl- A Typical two-bed DM Plant consists of two FRP vessels connected in series along with its internal fittings. The first unit consists of high capacity strongly acidic cation exchange resin, which converts positive ions of salt and replaces them with hydrogen ions to form respective acids, which are absorbed in next vessel by strongly basic anion exchange resin. The water obtained by this process shows conductivity less than 30 µScm and Total Dissolved Solids less than 10 ppm.Further high purity water can be achieved by Mixed Bed Deionizers, which are designed to produce high purity treated water. They can be used as polishing units after two beds DM Plant to obtain high purity water.