Drawing Machine Dealers in Fort, Mumbai

• Capacity Round: 1" 25mm, 1.25" 36mm
• Hex: -5/8" -16mm, -1" -25mm
• Garden Size: 7" x 3.5" 175mm x 75mm , 8" x 4" 200mm x 100mm

We are a leading exporter of Bar Drawing Machines which can be availed at industry leading prices. These machines are available in various standard sizes and also they can be customized as per the client needs.

Wire drawing machines are suitable and known for their performance in the field of wire drawing. Graded casted part are mounted on steel fabricated frame to bear the maximum load and fatigue to give trouble free service. The machines are available for different size of wire rods.

• Warranty: One year
• motorised machine: motorised coolant pump fitted
• After-Sales Service Provided: No overseas service provided
• Power(W): 1
• Condition: New
• Model Number: SWD-204
• Port: Mumbai

This is an ideal geared type motorized wire drawing machine arrangement to hold six wire drawing dies at one time. It is fitted with special self-adjusting wire winding system so that the wire does not break during operation. It is fitted with motorized coolant pump to keep the drawing dies cool for better finish & longer die life.

Wire drawing machines are suitable and known for their performance in the field of wire drawing. Graded casted part are mounted on steel fabricated frame to bear the maximum load and fatigue to give trouble free service. The machines are available for different size of wire rods.  

This floor model Hollow Tube making machine is a motorised model tube forming machine ideal for making hollow gold and silver rings and bracelets. Gold or Silver strip of metal is fed through the hollow drawing die to get the required shape of hollow tube depending on the shape of the drawing die. One can draw hollow round, oblong or heart shape hollow pipes which is wound onto the mandrel of required diameter. This hollow tube drawing machine is supplied with suitable drive Electric motor suitable to run on 220 volt single phase supply fitted to special gear box drive with electric control panel box to allow variable speed control. Extremely accurate Strip cutting machine is also offered with circular knives made with special steel. This machine is also available with motor drive for motorised operation with on/off switch and V belt. Kindly ask for more details.

General Features: - Main body with base, drawing drum and drawing die box of close grain Cast Iron - Water Cooling arrangement provided inside the Drawing Drum and the Die Box - Phosphorous bronze gears with high carbon axle steel worms - Suitable for making Nail Wire from 8 mm or 6 mm input rods up to 2 mm - Also suitable for making Wire used to make Barbed Wire, Wire Mesh, etc. - Wet / Slip type Fine Wire Drawing Machine also available - Details on request.        The wire rod to be drawn is pointed in the Wire Pointing Machine. This pointed wire is inserted through the die of the first Wire Drawing Machine and fastened to a locking device on the drum. The drum is then started. As the drum rotates, the wire fastened to the drum gets pulled and coiled around the drum. Since the wire getting pulled is passed through the die having a higher inlet diameter and a lower outlet diameter, the drawn wire diameter gets reduced.     The starting end of the drawn wire is released from the lock of the first drum, is passed through the overhead loop and pulley provided, is brought down and is inserted through the die of the second drum and drawn through this die for further reduction. Thus, the wire is drawn through all the wire drawing drums of the set in a continuous manner to get the required finished diameter of the wire.     When the drum of the last wire drawing machine gets fully loaded with the drawn wire, the machine will be stopped to unload the finished material and then restarted. (If one opts for the continuous coiling machine, the drawing process will not have to be stopped for this purpose)     When the bundle of input rod finishes, the machine should be stopped. The end of this bundle is welded to the end of a new bundle of rod using the butt welding machine. Then the process is to be continued.     Also, in case of an accidental snapping of wire in between drums, the snapped ends are welded with the help of the butt welding machine and the process is continued.

Six Block OTO Type Wire Drawing Machine Wire Drawing Machines are available from 3 Blocks to 11 Blocks & 300MM to 600 MM dia. DOUBLE BOX  TYPE CONTINUOUS WIRE DRAWING MACHINE FOR NO TWIST can also be offered. Bull Block Type Wire Drawing Machine & Double Dack Type Wire Drawing Machine Product Specification General Construction:All Drawing Blocks are internally water cooled by multi jet spray. The Blocks are manufactured from special quality cast iron. Die Box: Die Box Comprises of two separate compartments, one for the dry shop drawing lubricant, & another one for water cooling of the die. The box is adjustable in vertical & horizontal positions. Operator Controls :START-STOP Push Button, INCH foot switch, ON, OVER LOAD, GUARD OPEN indicators, etc. Guards:Machines have rear steel plate guard and also wire mesh guard provided covering the units from front. All mesh guards are electrically interlocked and when guard is open entire machine will shut down. Pull In Tong:Box type tongs with hardened jaws are supplied with each machine to cover the full range of wire sizes to be produced. The Tongs have a length of chain and a hook to fit into the pockets of each blocks. Note: Max. Power & Finished speed shall vary as per application.

Wire Drawing Machines are available from 3 Blocks to 11 Blocks & 300MM to 600 MM dia. DOUBLE BOX TYPE CONTINUOUS WIRE DRAWING MACHINE FOR NO TWIST can also be offered. All Drawing Blocks are internally water cooled by multi jet spray. The Blocks are manufactured from special quality cast iron.

Bull Block Heavy Duty Wire Drawing Machine, friction screw presses