Drum Heaters Dealers in Mumbai

Oil drum heater is heating on the surface of drum to make the concentration and viscosity of the liquid and coagulum inside decreased uniformly. In this way It will be easy to take out the liquid and coagulum in any season. The flexible drum heater has an Inside Ni-Cr Alloy heating wires. Outside is silicon rubber insulation material for Fast heating and long working life. Ni-Cr Alloy heating wire is wound around the alkali-free fiber-glass. Main insulation material is silicon rubber which is of high heat-resistance and insulation. These drum heater is soft and flexible resulting in snug fit over the drums. Features Temperature controller on the surface of heating band The temperature range can be set between 30-150C normally Maxi heat-resistance – 250C Suggested operating temperature – < 200C Insulation resistance – > 50MΩ Dielectric strength: > 1500V /min Can be used on both HDPE and metal drums Application Fats Gelatin Glucose Grease Lubricating Oils Paints Petroleum Jelly Phenols Plastics Vegetable Oils Varnishes Waxes

• Brand Name: Economyheaters
• Place of Origin: Maharashtra, India
• Heating Element: Heaters
• Electric Heater Type: Base Drum Heaters

• Voltage: 220-380V
• Power: 12 Kw
• Phase: 3 phase
• Frequency: 50 Hz
• Power Source: Electric
• Brand: HAMCO
• Capacity: 200 Ltr
• Heating System: Vertical heating system

We are a prominent Manufacturer, Exporter & Supplier of Industrial Drum Heater. The Industrial Drum Heater is engineered to perfection by our team of proficient technicians. The Industrial Drum Heater is known for its robust construction, durability, efficient performance and long working life. We supply the Industrial Drum Heater in various parts of the world at the most reasonable prices. Power : 440 V, 50 Hz, 3-� power supply. On demand half size drum heater could be made Construction : This industrial drum heater ( vertical model) has a well type, double walled construction. The Inner chamber is made of MS with a heat resistive silver paint finish and the outer chamber is also made of MS with a powder coat finish. The industrial drum heater has an electrical heating system, suitable for heating 200ltrs standard size drum. The drum heater is made into 2 semicircular halves, which are joined at one end by heavy duty hinges & clamps and at the other end by a special press fit adjustable lock, with the control panel on one half heater & heater connector junction box on the other half. A SS �U� type Enconel heater of suitable capacity is used as the heating element for uniform distribution of heat. The maximum achievable temperature is 250oC. A digital microprocessor PID temperature controller cum indicator with PT-100 sensor controls the heating process. The unit is easily moveable on its costar wheels.

Drum Heaters are ideal for heating materials that require sensitive temperature control. Each unit heats and thermostatically controls the air temperature around the sides of the drum. This eliminates many of the problems associated with heaters that come into direct contact with the drum or contents. These heaters are available in a variety of voltages and wattages in both single and three phase » 240 V / 440 V standard AC Supply.» Temperature controlled with thermostat.» Insulated for heat losses. » Both the heaters are movable on castors.» Easy to use.» Economical to operate.» Half drum heaters are also available. Catalog No. SME-FDH Thermostat Control Supply Cord: 3 meters long.

• Type: BriskHeat Heavy-Duty Flexible Drum Heaters with Thermostat
• Features: maintain temperature and viscosity, adjustable temperature control, Resistant to moisture and chemicals.

This Industrial drum heater ( vertical model) has a well type, double walled construction. The Inner chamber is made of MS with a heat resistive silver paint finish, and the outer chamber is also made of MS with a powder coat finish. The unit has an electrical heating system, suitable for heating 200ltrs standard size drum. The drum heater is made into 2 semicircular halves, which are joined at one end by heavy duty hinges & clamps and at the other end by a special press fit adjustable lock, with the control panel on one half + heater,& heater + connector junction box on the other half. A SS ‘U’ type Enconel heater of suitable capacity is used as the heating element for uniform distribution of heat. The maximum achievable temp. is 250ºC. A digital microprocessor PID temperature controller cum indicator with PT-100 sensor controls the heating process. The unit is easily moveable on its castor wheels.

• Voltage: 230V, Single Phase or 440V, 3 Phase
• Phase: 3
• Brand Name: Thermo Drum Heater
• Condition: New
• Size: 200 Ltr standard drum
• Heater Material: Resistance wire
• Installation: Freestanding
• Capacity (l): 200 Ltr
• Temperature (deg. Celsius): 180
• Product Type: Thermo drum Heater
• Power (Kw): 4.5

Sunil Heat's drum heater has been designed to overcome the problem to handling and heating -5 g&!c drums containing oil, wax. resin, fats, food products or chemicals. The specially constructed uñar ste. frame of the unit enables f 5 gallon drums to be quickly and simply lifted into a horizontol disperin position without the aid of hoists or ramps. The unit is mobile, being fitted with four Castor wheels wit Optional brake feature.This enables 45 gallon drums to be readily transported in stores and productio areas.The 6kW heating unit consists of inconel sheathed heating elements which are located within polished aluminum reflector. The elements are controlled by a 3-heat rotary switch and the unit is equippe vith a heavy duty. metal clad, shrouded plug and socket, designed so that the mains supply cable can readily detached from the unit while drums are being loaded, transported or unloaded. Other safety feature incorporeted in the design of the unit inclume a wire mesh elements guard, a mains-on neon warning hg! and drain holes in the polished aluminium reflector to cope with accidental spillage.The radiant heating unit can be supplied separately or complete with the wheeled, tubular stand. Standard units are available for operation on 230/415 volts, 50 Hz AC/DC, Electricity SupplyNote :This unit should not be used for heating drums containing highly inflammable liquids.OUT FLOW HEATER used to reduce the viscosity of the oil, from main tank to day tan Installed on the outlet of main tank which helps in continuos flow oilConstruction: material M.S. flanges, pipes, etc.Capacity: 9 to 24 kw, 230 volts AC 50 HzLength: 27” to 36” long with automatic thermostats to control ti temperature of range from 60° C. to 1100 CA complete unit with panel board with indicators of each heaters Note : Removable Element without draining TankTANK HEATERSused to drain out the oil from the transporter tanker to the ma tanker in factory available in 6 kw. 230 volts AC 50 Hz wi wooden handle  

• Type: Drum Heaters
• Material: Aluminium, Brass, Concrete, Copper, Metal, Silicon, Steel
• Shape: Round
• Application: Water Boiling, Water Storage
• Color: Black, Light Grey, Metallic, Silver, Smoke Grey, White
• Condition: New, Used
• Finishing: Chemical Coated, Powder Coated
• Warranty: 1 Year, 2 Yrs
• Feature: Anti Corrosive, Anti Leakage, Good Strength, Heat Resistance, High Storage, Rust Proof, Unbreakable

Drum heaters These pads are highly efficient in producing uniform heat to the entire barrel. On each drum a single pad or multiple pads can be used.

• Type: Drum Heaters
• Brand Name: CELSUN
• After-sales Service Provided: Yes

tried and tested across many industries, our range of flexible heating jackets simply wrap around the vessel / drum , clip together and the thermostat can be set to the desired temperature.
high-grade thermal insulation to reduce heat-loss and increase efficiency whilst providing protection for the operator.
fitted with adjustable retaining straps and quick release buckle clips.
integrated fully adjustable thermostats.
240volt or 430volt versions available from stock.
ideal for wide variety of plastic, fibre and metal containers – drums, tubs, buckets, kegs, carboys, totes and ibcs.
deliver an even heat over a large surface area, minimizing the possibilities of damaging the product.
fit and forget – no regular maintenance required.
safe to use 24 hours a day.
available in various capacity like 1kw, 1.5kw, 3kw, 4.5 kw for standard 200 / 50 / 20 liter poly / metal drum or custom size..

We are offering electric drum heater that is used to melt material within the drum that can be extracted or removed. The standard drum size is 200 kg that is fitted with side heaters and bottom heaters. Flp control panel is available separately with the unit and is fitted with the digital control to ensure accurate temperature control. We have drum heater in which entire drum is inserted and semi-solid materials can be liquefied. Our ms electric drum heater is available with separate temperature control panel that can wall-mounted. types flameproof drum heater non-flame proof drum heater features heaters are fabricated flame proof by covering the various heating elements with s.s. Tube insulated with m. G. O. Powder.ptr 100 ohms sensor is available in the sensor for the exact measurements of temperaturestandard 9 k.w. Load is applied to the drum heatertemperature controller ensure that temperature does not shoot up beyond set valueworking temperature of the drum heater is 150°c max..

Drum heaters are used to control temperatures on a variety of pails or drums where maintaining viscosity and keeping the contents fluid are important. Drum heaters provide uniform heat and prevent scorching or degradation of sensitive materials. Drum heaters also provide freeze protection and are available with fixed or adjustable thermostats for various applications. Economy offers different types to suit variety of applications, and usage.

Drum Heaters, electric immersion heater

Drum Heaters, IR Flash Cure Dryer, Geyser Elements

Drum Heaters, High Temperature Cables, mineral insulated cables, lab oven