Dryer / Drying Machine Dealers in Andheri, Mumbai

Salient Features : Pre-air filtration by 20 micron filters. Secondary AIR Filtration by 5 micron filters Final air filtration through HEPA (0.3 micron) filters as an optional feature Air Dehumidification on special demand Monoblock Construction: Retarding chamber & expansion chamber are made in single piece construction to enhance cGMP  and facilitate hygienic cleaning Solid Flow Sensor Monitor: Dust monitor installation to detect Leak on Filter bags to avoid Material Loss and Air Pollution. Inlet / Outlet dampers have proportional control valve Proportional control temp controller Inlet / Exhaust Location: on service floor Wash in place Control: By PLC with MMI colour monitor with printer as optional Specially designed explosion flaps Pneumatically inflated gaskets for bowl sealing & finger bag Intrinsically safe system of earthing with low voltage Steam radiator in SS Construction Air preparation unit in SS 304 Pneumatic bag shaking  

FUNCTION  Used mainly for drying of high grade, temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances, which are dried to very low residual moisture, content level. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. CAPACITY Standard models range from 4 trays to 48 trays. SALIENT FEATURES Bodies may be of cylindrical or rectangular cross section. Both shelves and body are heated (the body to prevent internal condensation) with controlled circulation of hot water, steam or dia thermic fluid. Vacuum is drawn through large diameter ducts to minimize pressure drops and produce minimum working pressures. Both rotary and static dryers can be supplied with the following Optional ancillaries. Heater system for either pressurized hot water or dia thermic fluid. Cyclones and sleeve filters for powder recovery (for rotary dryers) Solvent recovery system with condenser and receiver, vacuum pump and ancillaries, characteristics and dimensions depending on the drying processes. Vacuum Tray dryer is the most commonly used batch dryer. They are box-shaped and loaded and unloaded via a door (two doors on the larger models). Inside are several heating plates mounted one above the other on which the product is placed in trays. The bottoms of both heating plates and trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam or thermal oil.     The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To void retrograde condensation the cabinet walls are indirectly preheated by the heating plates. Next, the product is introduced and heated at atmospheric pressure. Only after all individual product trays reach the same temperature the cabinet is evacuated and drying can start. The  preheating phase is very important in order that the drying curve and the foaming of the product is identical throughout the cabinet. During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuums of only few mbar abs are reached. Heating temperatures are normally in the range between 800C and 1100C. Depending on product and surface load, drying takes from a few hours to 1 to 2 days. For some products the vacuum and temperature profiles are automatically controlled in order to prevent a pass over of the critical product temperature. factor in the design of drying cabinet systems. If for example vigorous foaming of the product is desired, evacuation to the operational vacuum level must take place very quickly. Vapors produced during drying are taken out direct, or via a steam jet compressor to a surface condenser in which the vapors condensate. The non-condensable vapors are extracted by the vacuum system. On completion of the drying, the product can be cooled by circulating of cooling water through the heating plates. Features: All contact parts are made out of SS304 / SS316 / SS316L quality material in GMP models and mild steel externals with stainless steel internals in standard model Hollow pad type heating shelves which are easily removable for maintenance Condenser and condensate receiver fixed on the dryer body or stand alone for remote installation Full welded skirt on vacuum dryer body for flush mounting through the wall. External fluid heating of dryer with protective panels in stainless steel or mild steel powder coated. Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid (for temperature requirements above 95 oC) Validation ports and nitrogen purge nozzles Can be designed to customers specification requirements Steam sterilisable models available Double door loading available for large models Halar lined internals for corrosive applications

General Specification: Construction : External : 2 mm  Thkinternal : 2 mm Thkmoc : cGMP  Surface Finish : External : Buffed to 150 grit matt finish Internal : Buffed to 220 grit mirror finish.  Inlet & Outlet : All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustable damper at the outlet. Door : Doors at provided at the front and / or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors. Air Circulation : Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity, static & design depends on the size and model of dryer. Heating : Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the dryers. Temperature Control : Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic. Trays : Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with cooved corners. Trays are buffed to mirror finish. Trays are also available in aluminum / Polypropylene / Frp/ M.S. galvanized as per clients requirements. Trolley : Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer. Control Panel : Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.

• Country of Origin: India
• Type: Salon Hair Dryer
• Brand Name: Berina
• Application: Parlour, Personal
• Color: Red

Salonmart offer Professional Hair dryer at lowest cost.

Microwave Dryer is the best suited technology for industries related to pharmaceutical formulations. Thus people are highly preferred this technology over others. Rufouz Hitek Engineers prepare such Microwave Dryer System which can go well with your manufacturing specifications. The term microwave itself refers to the frequency which lies in the electromagnetic radiation. They are the most commonly used technique that used in our day to day lives. Drying is one of the operation where a big amount of energy is needed for changing the phase. Heat in the microwave is generated through the interaction between the microwave and the part where electromagnetic energy is degenerated.

Microwave Dryer is the best suited technology for industries related to pharmaceutical formulations. Thus people are highly preferred this technology over others. Rufouz Hitek Engineers prepare such Microwave Dryer System which can go well with your manufacturing specifications. Recently we have formulated a Dielectric Microwave Dryer in association with SAMEER- which is one the outcome of the Tata Institute of Fundamental Research. The term microwave itself refers to the frequency which lies in the electromagnetic radiation. They are the most commonly used technique that used in our day to day lives. Drying is one of the operation where a big amount of energy is needed for changing the phase. Heat in the microwave is generated through the interaction between the microwave and the part where electromagnetic energy is degenerated. Buy microwave dryer from hitekengineers with affordable price.

Brassomatic replaceable Core Dry-all Filter Driers are made up of heavy duty steel shell, housed inside the Dry-all mounted porous filter cores. These provide maximum water capacity, excellent acid removal characteristics and the ability to remove the products of oil decomposition. A bolted end flange allows for simple and trouble-free installation. Sizes available: ½” to (3+1/8)” For Single Core Shells: ½” to (1+1/8)” For Two Core Shells: 7/8” to (2+1/8)” For Three Core Shells: (1+5/8)” to (3+1/8)” For Four Core Shells: (1+5/8)” to (3+1/8)”

• Country of Origin: India
• Size: Standard
• Type: Plastic Dryers
• Shape: Standard
• Application: Industrial Use
• Feature: Eco Friendly
• Voltage: 220V
• Packaging Type: Wooden Box
• Brand Name: Forum
• Condition: New
• Capacity: 1000
• Warranty: 1
• After-Sales Service Provided: 1

Range 12-1500Kgs. Main Features :  Even heat distribution. High efficiency to save lots of drying time required. Accurate thermo control. Very high accuracy assured by excellent controller. Convenient change of raw material by two pieces of design. Reliable design. Compact in size.

• Type: Hair Dryer
• Material: Plastic, HDPE, LDPE, PVC, PP
• Application: Personal, Parlour
• Color: White, Black, Red, Grey, Brown, Blue, Orange, Green
• Power: Electric
• Feature: Quick Dry, Attractive Designs, Light Weight, Hanging Loop, Stable Performance, High Air Flow, Auto Heat Resistant, Energy Saving Certified, Low Power Consumption
• Warranty: 3months, 6months
• Brand Name: Philips, Nova.Samsung, Bajaj, Syska

• Type: Electric hair dryers work by blowing room temperature air in through the vents. The air then passes
• Power: 1000 W
• Material: ABS
• Brand Name: RIOO
• Color: WHITE
• Usage/Application: Professional
• Model Name/Number: RHRD 001
• Current: 5.4 A
• Dimension: 17 X 9X 20
• Frequency: BLOWING RATE : 13 M /S,BLOWING VOLUME - 71 m3/h

Attached to the shaft are hollow paddles provided with specially designed scraper blades, which scrape the entire internal surface of the Dryer and continuously move and rotate the material thereby precluding the possibility of material remaining in contact with hot surfaces for protracted periods of time.

We are considered as one of the most important Fluid Bed Dryer Exporters from India. We present acme quality Fluid Bed Drying Machine that is designed using cutting edge technology. Used for dying purposes, Fluid Bed Dryer is used in various industries like pharmaceutical, dyes, food and chemical industries. Known for its efficacious performance and long life, Fluid Bed Batch Dryers are highly demanded by customers. We provide availability of Fluid Bed Dryer in unlike specifications as per customer demands. ADVANTAGES The conventional drying method for drying products in tray dryers is rather inadequate & troublesome. They also occupy large space & have very high & uneven drying times and also involved high labour input. To over come this problem RIDDHI made Fluid Bed Dryer which is the simple solution to dry the products. SUITABILITIES This compact unit is suitable for drying granular, crystalline, coarse or similar materials in Pharmaceuticals, Dryer, Fine Chemicals & Food & Allied Industries. It is also possible to dry fine crystal or coarse materials in fluid bed dryers. DESCRIPTION Latest improvement in design makes this unit truly GMP model for Pharmaceuticals industries & versatile in operation for other industries like food, dyestuff, chemicals & polymer industry. In GMP models, all the contact parts made out of S.S.304 / 316 material & are provided with isolated panel board. However with standard Fluid Bed Dryers for product containers, retarding chamber are made out of stainless steel materials S.S. 304 only & other parts from mild steel sheet. BATCH SIZE Batch size indicates weights of wet products (inclusive of moisture). Our Model RDFD-30 can take batch size of 30 to 40 Kgs. of wet material. Similarly model RDFD-120 can process 120 to 135 Kgs. of wet material per batch. The weight of materials to be loaded per batch depends upon the bulk density of wet material. OPERATION The wet material is introduced into the dryer as a batch of material in a product container which is provided with air distributor plate & clutch weave. Induced draught is created by the blower & fresh air is sucked into the unit. After filteration, clean air passes through the heating elements. This hot air then passes through the product containers, creating turbulance in the products & hence the product moves up and down known as Fluidization in the product container. Due to this process, the heat transfer is quick and the product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from the dryer. HEATING Fluid Bed Dryer can be supplied in electric heating, steam heating or hot water circulation systems or gas heating system on demand. Electrically heated dryers are provided with electrical heating elements and are suitable to raise air temperatures by about 750 C (i.e from 300 C to 750 C). Similarly steam operated dryers are provided with steam radiator suitable to raise air temperature about 600 C to 750 C depending upon pressure of steam. Generally dryers bigger than RDFD- 60 are incorporated with steam heating system as it is more economical. DRYING TIME The drying time depends upon various factors such as physical properties of material, moisture content, type of moisture (free moisture or water of crystallization), drying temperature etc. The crystalline products can be dried faster than amorphous product containing same percentage of moisture at the same temperature. Generally pharmaceutical granules or crystals containing free moisture of about 20% to 25% can be easily dried in about 30 to 40 minutes at a temperature of about 750C. Certain crystalline materials containing about 40% of moisture can be dried in Fluid Bed Dryer within 35 to 45 minutes. IMPORTANT In case the product contains solvents or inflammable substances, it is essential that the Dryer is steam operated &provided with flame proof motor. Motor The dryer will be provided with with suitable Remi/Hindustan/Sabar or standard ISI make motor of 2800 RPM FILTERATION Single stage filteration of 20 microns PP cloth filter, P.P. filter bag for exhaust air, also multi stage filteration can be given on demand. Positive Earthing Arrangement, explosion flap are given as a part of standard features. Control Panel Pre-wired control panel indicate Digital Timer, Digital Temperature Indicator cum controller(Inlet), Digital Temp. Indicator (Outlet), Sensor, Star-Delta Starter with relay, Indicating Lamps, MCBs, Amp. Meter cum Volt Meter, Selector switch etc. SPECIAL FEATURES Uniformity in drying and reduction in drying time.Atmospheric inlet air is filtered by means of single / multi stage filters of 20 microns to prevent any fine dust to pass through the product.Steam Coil made out of 1” dia. SS 304/316 finned tube & is designed to get pressure of around 3-4kg./cm^2 (working pressure 3 kg/cm^2).Digital temperature indicators cum controller is provided with the unit to indicate the inlet and outlet air temperature as well as to controller the present inlet air temperature.Air suction and discharge dampers provided to control the inlet and outlet air flow.An explosion safety flap of adequate capacity at the rear end of the dryer and an positive earthing point to prevent static charge in the machine are provided.Timer provided to set the process time which will cut off the motor supply after pre-set time period.

These dryers are of solid construction with a strong & heavy base of Casting. The Body is of sheet metal. The Flywheel and the Perforated Basket are balanced to reduce vibrations. Heating is provided with Elements, which can be easily replaced. The lid is interlocked with the Foot Pedal, which cuts off power supply to the Motor & Heaters.

• Tray Size: 16 x 32 x 1.25 (h)
• Tray height: 2 inches

All stainless steel 304 316 316L CGMP or mild steel externals with stainless steel internals (vapor and product contact parts), Hollow pad type heating shelves which are easily removable for maintenance, Condensor and condensate receiver fitted on the dryer body or stand alone for remote installation Fully welded skirt on vacuum dryer body for flush mounting through the wall, External insulation of dryer with protective panels in stainless steel or mild steel powder coated Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid ( for temperature requirements above 95 degree centigrade ), Validation ports and nitrogen purge nozzles. Can be designed to customers specific requirements, Steam sterilisable models available, Double door loading available for larger models

Drying solutions to produce cereal based baby foods (weaning foods), drink cereals, brewers yeast, fruits & vegetables, milk powder (for chocolates, gulab jamun & other Indian sweetmeats), also lines for making potato flakes / potato granules, maleic anhydride, phthalic anhydride, etc 

• Specialities: Air locks at the fabric entry and exit openings Special panelling tor low heat radiation Integrated exhaust air duct Etc
• BENEFITS: Gentle heat treatment Continuous fabric support even at chamber transition points Uniform Etc.

The DynAir relaxation dryer offers improved performance and universal application for open width and tubular knitted fabrics. Up to 15 percent higher drying performance thanks to a higher number of nozzle elements. It is also possible to integrate a heat recovery unit. Its modular design makes it very easy to adapt it for changing requirement. DynAir is manufactured in such a way that it does not take much space and easily accessible. It comes with special paneling for low heat radiations. It is adaptable to the boundary conditions of a particular application and different operating process for optimum energy utilisation. High efficiency indirect gas heating system practically eliminates yellowing during the treatment of polyamide and elastane-based fabrics, as the combustion gases do not come into contact with the fabric.

luid bed dryer are found throughout all industries, from heavy mining to food, fine chemicals and Pharmaceuticals and sugar indu Fluid bed dryer are found throughout all industries, from heavy mining to food, fine chemicals and Pharmaceuticals and sugar industry. It is stationary equipment, provided with FD and ID pans, with various capacities from 15T/hr to 50T/hr along with dust catching system. They provide an effective method of drying relatively free flowing particles with a reasonably narrow particle size distribution. In general, fluid bed dryers operate on a through-the-bed flow pattern with the hot air passing through the product perpendicular to the direction of travel. The dry product is discharged from the same section.   Advantages of FBD High rate of heat transfer is achieved with almost instant evaporation Batch / continuous flow material is possible Moisture reduction from 1,5 %to 0.02-0.03% In fluid bed drying, the heat and mass transfer rates are faster by a magnitude of one Sugar temperature should be close to wet bulb temperature of air, This allows gentle drying without caramellsation of sugar The gentle drying and cooling process brings with it an excellent product quality, especially with regards to brightness of the product The enlarged cross-section above the fluid bed reduces dust discharge Stationiry type / no hopper movement reduces crystal breakage Lower maintenance due to absence of moving parts

This is due to our streamlined packaging system that we are able to meet the customized and standard packaging requirements of the clients. Moreover, we ensure complete safety of the products. We make use of premium material for packaging the offered lot so as to ensure safe side deliveries.