Dryer / Drying Machine Dealers in Midc, Mumbai

• State: Liquid
• Application: Industrial
• Packaging Type: Barrel, Drum
• pH Value: 0-7, 7-15
• Purity: 0-99 %
• Color: Red, White, Yellow

• Features: Very high evaporation capacity, Very high thermal efficiency, Partial drying possible, Continuous operation, Compact installation
• Applications: Crystalline Solids, Agro waste in sludge form, Biological sludge.

Rotary Vacuum Paddle Dryer  is a jacketed cindrical vessel with a large diameter hollow shaft. Attached to the shaft are hollow paddles provided with specially designed scraper blades, which scrape the entire internal surface of the dryer and continuously move and rotate the material thereby precluding the possibility of material remaining in contact with hot surfaces for protracted periods of time. The jacket and hollow shaft with paddles can be heated with hot water, steam or any other thermal fluid capable of providing a larger indirect heat trfer area. Cooling can be also be done by cold water, brine or any other refrigerant through the jacket and hollow shaft. Limpet coil can be provided in lieu of jacket, if liquid heating medium is used. Hard facing of shaft provided in way of gland packing areas of trunnions. Arrangements for nitrogen purging provided. Bag cleaning arrangement with pulsation by nitrogen jet injector provided. Heavy duty trunnions and bearings support the hollow shaft and the drive is provided by me of a motor through reduction gears chain and sprocket. Provision has also been made to insert four breaker bars inside the dryer shell for particle size reduction. In special cases, stationery scraper blade can be provided to scrape the rotating agitator, for highly sticky material. Silent features:  Ideal for temperature sensitive materials. Almost 100% recovery of solvents.  Low energy consumption. CAP:- 10 LTRS TO 30000 LTRSMOC MS,SS 304,SS316,SS316L

Cashew nut dryer ( oven )- borma electric 1. Capacity - 30 kg 2. Capacity - 60 kg 3. Capacity - 100 kg 4. Capacity - 125 kg 5. Capacity - 150 kg 6. Capacity - 250 kg 7. Capacity - 500 kg 8. Capacity - 750 kg 9. Capacity - 1000 kg

• Features: Heating fluid temperature Slope of drier Speed of drier Airflow in drier

Can operate either as batch type or continuous type drier. We can operate either as batch type or continuous type drier. Operates at low power – Maximum of 5 HP Drying time around 25% that of Tray Drier – Saves production time. Temperature can be positively controlled anywhere between 35 to 200° C Very economical – Material cost can be controlled as instead of a SS shell, M.S. shell with SS lining can be used. Totally contained system – Evaporate fumes can be directed to the desired position. Product can be cooled before discharging – Time saving as product can be directly sent for packing.

• Automatic Grade: Automatic
• Design: Customized

• Brand Name: Metwiz
• Capacity: 5 liter
• Usage/Application: Spray drying powder
• Material: SS
• Model Name/Number: MW-SD01

• Features: Main Body/Vacuum chamber thick SS 316 plate with heavy duty SS 316 flange and stiffeners.Trays in SS 316 rounded corners and edges.Silicon transparent gasket for door.
• Optional: Hot water system (steam heated) with MS tank (insulated), SS 304 steam radiator/electrical heaters,
• Finishing: Internal 320 grit mirror polish and outer 180 grit mat finish.

The DMH series Liquid Line Filter Driers are designed to protect the refrigerant system from liquid and solid contaminants. They incorporate a specially formulated desiccant blend of molecular sieves and activated alumina providing very high mechanical strength, outstanding filtering capability, high moisture, adsorption and acid removal. DMH series is recommended for refrigeration, freezing, air-conditioning systems and for mobile refrigeration.

• Country of Origin: India
• Type: Salon Hair Dryer
• Brand Name: Berina
• Application: Parlour, Personal
• Color: Red

Salonmart offer Professional Hair dryer at lowest cost.

An Air Tray Dryer Is used for the best drying results in conventional process. It consists of a double-walled cabinet with one or two doors. The gap between two walls is filled with light resin-bounded fibreglass wool insulation material to avoid heat loss. The doors are provided with gaskets to avoid air leakages from the front side of the door. Stainless steel trays are placed inside the chamber. cGMP model dryers are designed to dry specific products.

• Type: Air Compressor
• Color: Blue
• Feature: Durable, High Performance, Low Maintenance, Stable Performance
• Voltage: 230V/1/50Hz
• Condition: New
• Power Source: Electric
• Pressure: High Pressure
• Motor Power: 0.5 - 10.6 HP
• Warranty: 1Year
• Configuration: Air Compressor
• Flow Rating: 25 CFM to 2825 CFM
• Country of Origin: India

• Brand Name: Hitek
• Condition: Good
• Place of Origin: Mumbai
• After-sales Service Provided: Available
• Application: Food Industry,Paper Industry,Rubber Industry,Pharmaceutical Industry,Textile Industry
• Feature: Small Drying Period,Best Output,Low Production Cost,Control Temperature,Upgraded Edition.

Industrial Microwave Dryer that we offer is perfect to be used for pharmaceutical formulations. It is manufactured using highly advanced techniques under the keen observation of experts. We are counted among the top Manufacturers, Exporters and Suppliers of Microwave Dryer. We conduct stringent quality tests on Microwave Dryer so as to ensure that only the defect-free product reaches the customers end. It can be obtained from us at the best market price. Applications Of Industrial Microwave Dryer : Food Industry Paper Industry Rubber Industry Pharmaceutical Industry Textile Industry Advantages Of Microwave Dryer : Small Drying Period Best Output Low Production Cost Control Temperature Upgraded Edition Corrosion Free Tough Features

Microwave Dryer is the best suited technology for industries related to pharmaceutical formulations. Thus people are highly preferred this technology over others. Rufouz Hitek Engineers prepare such Microwave Dryer System which can go well with your manufacturing specifications. Recently we have formulated a Dielectric Microwave Dryer in association with SAMEER- which is one the outcome of the Tata Institute of Fundamental Research. The term microwave itself refers to the frequency which lies in the electromagnetic radiation. They are the most commonly used technique that used in our day to day lives. Drying is one of the operation where a big amount of energy is needed for changing the phase. Heat in the microwave is generated through the interaction between the microwave and the part where electromagnetic energy is degenerated. Buy microwave dryer from hitekengineers with affordable price.

Brassomatic replaceable Core Dry-all Filter Driers are made up of heavy duty steel shell, housed inside the Dry-all mounted porous filter cores. These provide maximum water capacity, excellent acid removal characteristics and the ability to remove the products of oil decomposition. A bolted end flange allows for simple and trouble-free installation. Sizes available: ½” to (3+1/8)” For Single Core Shells: ½” to (1+1/8)” For Two Core Shells: 7/8” to (2+1/8)” For Three Core Shells: (1+5/8)” to (3+1/8)” For Four Core Shells: (1+5/8)” to (3+1/8)”

Salient Features : Pre-air filtration by 20 micron filters. Secondary AIR Filtration by 5 micron filters Final air filtration through HEPA (0.3 micron) filters as an optional feature Air Dehumidification on special demand Monoblock Construction: Retarding chamber & expansion chamber are made in single piece construction to enhance cGMP  and facilitate hygienic cleaning Solid Flow Sensor Monitor: Dust monitor installation to detect Leak on Filter bags to avoid Material Loss and Air Pollution. Inlet / Outlet dampers have proportional control valve Proportional control temp controller Inlet / Exhaust Location: on service floor Wash in place Control: By PLC with MMI colour monitor with printer as optional Specially designed explosion flaps Pneumatically inflated gaskets for bowl sealing & finger bag Intrinsically safe system of earthing with low voltage Steam radiator in SS Construction Air preparation unit in SS 304 Pneumatic bag shaking  

Range 12-1500Kgs. Main Features :  Even heat distribution. High efficiency to save lots of drying time required. Accurate thermo control. Very high accuracy assured by excellent controller. Convenient change of raw material by two pieces of design. Reliable design. Compact in size.

• Country of Origin: India
• Size: Standard
• Type: Plastic Dryers
• Shape: Standard
• Application: Industrial Use
• Feature: Eco Friendly
• Voltage: 220V
• Packaging Type: Wooden Box
• Brand Name: Forum
• Condition: New
• Capacity: 1000
• Warranty: 1
• After-Sales Service Provided: 1

• Application: Industrial, Pharamaceutical
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Brown, Grey, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Pneumatic, Electric, Hydraulic, Mechanical
• Warranty: 1year
• Power: 1-5kw, 15-20kw, 5-10kw
• Capacity: Capacity

• Types:  Specifications
•   Blow Boy (Slim Model):  Fully automatic with IR sensor, cover FRP  Color : White  Size : H = 230, W = 165, D = 145, Watts = 700, Volt = 230  Type: Single blower  Time: It dries hand in 40 to 55 seconds
•   Dart (Pin Point):  Fully automatic with IR sensor, D.C. motor, Body with stainless  steel mirror finish.  Color: White  Size : H = 255, W = 160, D = 110, Watt = 800, Volt = 230  Time: It dries hand in 25 to 30 seconds
•   Hydry (Quick):  Fully automatic with IR sensor, Cover FRP.  Color: Off-white  Type: Single blower  Size : H = 265, W = 245, D = 135, KV = 1.8, Volt = 230  Time:It dries hand in 25 to 30 seconds.
•   Hydry (With Mirror):  Fully automatic with IR sensor, cover FRP, supplied with mirror.  Color: Off-white  Type: Single blower  Size : H = 265, W = 245, D = 135, KV = 1.8, Volt = 230  Time:It dries hand in 25 to 30 seconds.
•   Drymax:  Fully automatic with IR sensor , stainless steel brush finish.  Size : H = 275, W = 210, D = 140, KV = 1.8, Volt = 230  Time: It dries hand in 20 to 25 seconds.
•   Acudry:  Fully auto with IR sensor with FRO, (Fibrous)  Color: Off-white  Size : H = 275, W = 250, D = 145, KV = 1.8, Volt = 230  Time: It dries hand in 25 to 30 seconds.  
•   Dryopus  (Opus Operation):  Fully automatic with IR sensor, stainless steel brush finish,  heavy single impeller, high pressure.  Size : H = 270, W = 280, D = 120, KV = 1.8, Volt = 230  Time: It dries hand in 25 to 30 seconds.
•   Dryzone (Hand & Face Dryer):  Fully auto with IR sensor, S.S. brush finish, heavy single  impeller, high pressure.  Size : H = 300, W = 280, D = 120, KV = 1.8, Volt = 230  Time: It dries hand in 25 to 30 seconds.
•   Blow Macho (Twin blower,   double outlet):  Fully automatic with IR sensor, cover FRP, S.S. brush finish,  Color: White  Size : H = 240, W = 235, D = 150, KV = 1.6, Volt = 230  Type: Twin Blower  Time: It dries hand in 30 seconds.

General Specification: Construction : External : 2 mm  Thkinternal : 2 mm Thkmoc : cGMP  Surface Finish : External : Buffed to 150 grit matt finish Internal : Buffed to 220 grit mirror finish.  Inlet & Outlet : All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustable damper at the outlet. Door : Doors at provided at the front and / or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors. Air Circulation : Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity, static & design depends on the size and model of dryer. Heating : Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the dryers. Temperature Control : Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic. Trays : Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with cooved corners. Trays are buffed to mirror finish. Trays are also available in aluminum / Polypropylene / Frp/ M.S. galvanized as per clients requirements. Trolley : Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer. Control Panel : Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.

Established in Mumbai(India), we are capable of catering to the demands of the customers within the committed time. Noteworthy Supplier of Industrial & Municipal Sludge Dryer, we are customers' favored option in this domain.

GRAFICA introduces to most easy & accurate way of drying stencil film/emulsions. In vertical drying with low viscosity emulsions there are chances of emulsion to accumulate on bottom and cause uneven emulsion thickness. Our unique horizontal drying system helps to maintain emulsion thickness equally all over the screen. Drying cabinets mounted in roller bearing for easy movement. Screen frame can rest easily on a bend support rods inside drying cabinet to avoid touching of wet emulsion and avoids to keep a support piece below the frame as this a general problem when screens kept with print side down. Flow of filtered hot air is designed to give a uniform heat all over the screen.  Specifications Temperature Controller Complete Insulation for Heat Efficiency & Reduce Power Consumption Five Independent Drawers Max Frame Size : 30 x 40 OD (76 x 100 cm) & 46 x 56 OD (116 x 142 cm)

• Features: The dryer due to its closed design reaches the preset temperature fast, Specially designed blower facilitates in even distribution of the hot air inside the chamber.
• Pay Mode Terms: L/C (Letter of Credit)
• Size: 12 T
• 24 T: 48 T
• 96 T: No. of Trays
• 12: 24
• 48: 96
• Motor – Blower (HP): 0.25
• 0.5: 1
• 1.0x2 Nos.: Electrical Heater (k.w.)
•  :  
•  :  
• Upto 100 0C: 3
• 6: 9
• 15: Upto 200 0C
• 6: 9
• 15: 21
• Upto 300 0C: 9
• 12: 21
• 27: No. of Doors
• 1: 1
• 1: 2

These dryers are of solid construction with a strong & heavy base of Casting. The Body is of sheet metal. The Flywheel and the Perforated Basket are balanced to reduce vibrations. Heating is provided with Elements, which can be easily replaced. The lid is interlocked with the Foot Pedal, which cuts off power supply to the Motor & Heaters.

PNEUM SYSTEMS INC, has developed Heatless Air Dryer which is a chemical desiccant using dryer, working on adsorption principle. The system consists of twin towers filled with desiccant of appropriate quality and quantity. Wet compressed air after being filtered by the prefilter and coalescing oil filter enters the distribution valve. An electrically operated valve with built in passages, which directs the air to one tower. The air is then passed through the tower and comes out in dry condition. The air is then passed through after filter to remove any carry over dust, via non-return valve. There is a by-pass arrangement with an orifice, to allow a fraction of dry compressed air to expand and pass through the other tower, here by regenerating it and making it ready for adsorption Cycle. The Regenerating air is passed out to the Atmosphere via muffler. At a preset time, the sequence control timer actuates the Distributor valve to reverse the tower function . For lower capacities, the distribution valve and control valve are integral units, however for higher capacity these control elements comprise of discrete control valves and orifices. Our Heatless air dryers are compact, economical, pre assembled, fully automatic, “Fit and Forget” type of units with very little power consumption of around 100 watts. For detailed offer, please indicate capacity, pressure, and source of compressed air.

Compact, stainless steel unit with casters for easy movement, floor type freeze dryer provides unmatched process accuracy and reliability in performance. It optimizes your space requirements and reduces energy consumption. Basic specification : type: standard capacity: 1.2 litres condenser temperature: -55°c (-80°c optional) water holding capacity: 3-4 kg/24hr shelves: 4

• Tray Size: 16 x 32 x 1.25 (h)
• Tray height: 2 inches

All stainless steel 304 316 316L CGMP or mild steel externals with stainless steel internals (vapor and product contact parts), Hollow pad type heating shelves which are easily removable for maintenance, Condensor and condensate receiver fitted on the dryer body or stand alone for remote installation Fully welded skirt on vacuum dryer body for flush mounting through the wall, External insulation of dryer with protective panels in stainless steel or mild steel powder coated Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid ( for temperature requirements above 95 degree centigrade ), Validation ports and nitrogen purge nozzles. Can be designed to customers specific requirements, Steam sterilisable models available, Double door loading available for larger models

• Features: Air locks at the fabric entry and exit openings Special panelling tor low heat radiation Integrated exhaust air duct Etc
• BENEFITS: Gentle heat treatment Continuous fabric support even at chamber transition points Uniform Etc.

The DynAir relaxation dryer offers improved performance and universal application for open width and tubular knitted fabrics. Up to 15 percent higher drying performance thanks to a higher number of nozzle elements. It is also possible to integrate a heat recovery unit. Its modular design makes it very easy to adapt it for changing requirement. DynAir is manufactured in such a way that it does not take much space and easily accessible. It comes with special paneling for low heat radiations. It is adaptable to the boundary conditions of a particular application and different operating process for optimum energy utilisation. High efficiency indirect gas heating system practically eliminates yellowing during the treatment of polyamide and elastane-based fabrics, as the combustion gases do not come into contact with the fabric.