Dryers Dealers in Andheri East, Mumbai

An Air Tray Dryer Is used for the best drying results in conventional process. It consists of a double-walled cabinet with one or two doors. The gap between two walls is filled with light resin-bounded fibreglass wool insulation material to avoid heat loss. The doors are provided with gaskets to avoid air leakages from the front side of the door. Stainless steel trays are placed inside the chamber. cGMP model dryers are designed to dry specific products. Capacity: Lab model to suit 10kg powder - 6, 12, 24, 48, 96 and 192 trays. Standard, GMP & cGMP models available with SS 304/SS, 316/MS internals and externals. Construction: External: 2mm thick; internal: 2mm thick. Surface Finish: External: polished to 180 grit man finish; internal: buffed to 220 grit mirror finish. Inlet & Outlet: Pharmaceutical and industrial tray dryers have a 5-micron pre filter at the inlet and a manually adjustable damper at the exhaust. Doors: Doors are provided at the front and/or rear side of the dryer. The door lips are lined with silicon rubber gaskets to prevent air leakages. Suitable locking arrangement is provided for the doors. Air Circulation: This is done by specially designed re-circulation blowers inside the dryer. Blower capacity, static and design depend on the size / model of dryer. Heating: Dryers are supplied with either steam / electric / thermic fluid / hot water heating system. Suitable heating coils / calorifiers are provided. Temperature Control: This is done by an electronic digital temperature controller fitted to the control panel. The temperature control in the dryer is fully automatic. Trays: These are available in SS 304/316. All trays are fully dry-pressed and have curved corners. Trays are buffed to a mirror finish. They are also available in aluminium / polypropylene / FRP / MS galvanised according to client requirements. Trolley: A trolley is provided in the dryers to accommodate trays. Trolley tracks are used to load and unload the trays into the dryer. Electronic Panel: An automatic control panel is fitted on the side of the dryer. It consists of starters, contactors, safety relays, circuit breakers, indicating lamps, push buttons, timers, controllers etc. Backed by our efficient workforce, we are capable of manufacturing, supplying and exporting Air tray Dryer. Available in various models, these products are known for their longer service life, corrosion & abrasion resistant and easy maintenance. Our Air tray Dryer can also be customized as per the specifications laid down by the customers. We also check all the products on various parameters to ensure flawlessness.   Application area: • Chemical industry • Automobile industry. • Pharmaceutical industry.   Further Details : • The fan of the dryer is made of Mild Steel, AISI 304 / 316 and other material.• The internal side of fan and radiators is covered with mesh to give complete safety on operations.• The internal surface of the dryer is rounded, which result in least airflow resistance and low pressure.• The outer body of the product is provided with rounded edges.• The shafts are well balanced to provide optimum functional usage.

FUNCTION  Used mainly for drying of high grade, temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances, which are dried to very low residual moisture, content level. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. CAPACITY Standard models range from 4 trays to 48 trays. SALIENT FEATURES Bodies may be of cylindrical or rectangular cross section. Both shelves and body are heated (the body to prevent internal condensation) with controlled circulation of hot water, steam or dia thermic fluid. Vacuum is drawn through large diameter ducts to minimize pressure drops and produce minimum working pressures. Both rotary and static dryers can be supplied with the following Optional ancillaries. Heater system for either pressurized hot water or dia thermic fluid. Cyclones and sleeve filters for powder recovery (for rotary dryers) Solvent recovery system with condenser and receiver, vacuum pump and ancillaries, characteristics and dimensions depending on the drying processes. Vacuum Tray dryer is the most commonly used batch dryer. They are box-shaped and loaded and unloaded via a door (two doors on the larger models). Inside are several heating plates mounted one above the other on which the product is placed in trays. The bottoms of both heating plates and trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam or thermal oil.     The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To void retrograde condensation the cabinet walls are indirectly preheated by the heating plates. Next, the product is introduced and heated at atmospheric pressure. Only after all individual product trays reach the same temperature the cabinet is evacuated and drying can start. The  preheating phase is very important in order that the drying curve and the foaming of the product is identical throughout the cabinet. During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuums of only few mbar abs are reached. Heating temperatures are normally in the range between 800C and 1100C. Depending on product and surface load, drying takes from a few hours to 1 to 2 days. For some products the vacuum and temperature profiles are automatically controlled in order to prevent a pass over of the critical product temperature. factor in the design of drying cabinet systems. If for example vigorous foaming of the product is desired, evacuation to the operational vacuum level must take place very quickly. Vapors produced during drying are taken out direct, or via a steam jet compressor to a surface condenser in which the vapors condensate. The non-condensable vapors are extracted by the vacuum system. On completion of the drying, the product can be cooled by circulating of cooling water through the heating plates. Features: All contact parts are made out of SS304 / SS316 / SS316L quality material in GMP models and mild steel externals with stainless steel internals in standard model Hollow pad type heating shelves which are easily removable for maintenance Condenser and condensate receiver fixed on the dryer body or stand alone for remote installation Full welded skirt on vacuum dryer body for flush mounting through the wall. External fluid heating of dryer with protective panels in stainless steel or mild steel powder coated. Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid (for temperature requirements above 95 oC) Validation ports and nitrogen purge nozzles Can be designed to customers specification requirements Steam sterilisable models available Double door loading available for large models Halar lined internals for corrosive applications

Brassomatic replaceable Core Dry-all Filter Driers are made up of heavy duty steel shell, housed inside the Dry-all mounted porous filter cores. These provide maximum water capacity, excellent acid removal characteristics and the ability to remove the products of oil decomposition. A bolted end flange allows for simple and trouble-free installation. Sizes available: ½” to (3+1/8)” For Single Core Shells: ½” to (1+1/8)” For Two Core Shells: 7/8” to (2+1/8)” For Three Core Shells: (1+5/8)” to (3+1/8)” For Four Core Shells: (1+5/8)” to (3+1/8)”

• State: Liquid
• Application: Industrial
• Packaging Type: Barrel, Drum
• pH Value: 0-7, 7-15
• Purity: 0-99 %
• Color: Red, White, Yellow

• Types:  Specifications
•   Blow Boy (Slim Model):  Fully automatic with IR sensor, cover FRP  Color : White  Size : H = 230, W = 165, D = 145, Watts = 700, Volt = 230  Type: Single blower  Time: It dries hand in 40 to 55 seconds
•   Dart (Pin Point):  Fully automatic with IR sensor, D.C. motor, Body with stainless  steel mirror finish.  Color: White  Size : H = 255, W = 160, D = 110, Watt = 800, Volt = 230  Time: It dries hand in 25 to 30 seconds
•   Hydry (Quick):  Fully automatic with IR sensor, Cover FRP.  Color: Off-white  Type: Single blower  Size : H = 265, W = 245, D = 135, KV = 1.8, Volt = 230  Time:It dries hand in 25 to 30 seconds.
•   Hydry (With Mirror):  Fully automatic with IR sensor, cover FRP, supplied with mirror.  Color: Off-white  Type: Single blower  Size : H = 265, W = 245, D = 135, KV = 1.8, Volt = 230  Time:It dries hand in 25 to 30 seconds.
•   Drymax:  Fully automatic with IR sensor , stainless steel brush finish.  Size : H = 275, W = 210, D = 140, KV = 1.8, Volt = 230  Time: It dries hand in 20 to 25 seconds.
•   Acudry:  Fully auto with IR sensor with FRO, (Fibrous)  Color: Off-white  Size : H = 275, W = 250, D = 145, KV = 1.8, Volt = 230  Time: It dries hand in 25 to 30 seconds.  
•   Dryopus  (Opus Operation):  Fully automatic with IR sensor, stainless steel brush finish,  heavy single impeller, high pressure.  Size : H = 270, W = 280, D = 120, KV = 1.8, Volt = 230  Time: It dries hand in 25 to 30 seconds.
•   Dryzone (Hand & Face Dryer):  Fully auto with IR sensor, S.S. brush finish, heavy single  impeller, high pressure.  Size : H = 300, W = 280, D = 120, KV = 1.8, Volt = 230  Time: It dries hand in 25 to 30 seconds.
•   Blow Macho (Twin blower,   double outlet):  Fully automatic with IR sensor, cover FRP, S.S. brush finish,  Color: White  Size : H = 240, W = 235, D = 150, KV = 1.6, Volt = 230  Type: Twin Blower  Time: It dries hand in 30 seconds.

• Country of Origin: India
• Size: Standard
• Type: Plastic Dryers
• Shape: Standard
• Application: Industrial Use
• Feature: Eco Friendly
• Voltage: 220V
• Packaging Type: Wooden Box
• Brand Name: Forum
• Condition: New
• Capacity: 1000
• Warranty: 1
• After-Sales Service Provided: 1

• Material: Stainless steel
• Frequency: 50/60 Hz
• Features: Very high thermal efficiency, Compact installation, Heat Sensitive Materials.
• Automatic Grade: Automatic
• Design: Customized
• Application: Industrial
• Product Form: Powder

• Features: Outlet air dew point 40°C is achieved.

The system consists of twin towers filled with desiccant of appropriate quality and quantity. Wet compressed air after being filtered by the prefilter and coalescing oil filter enters the distribution valve. An electrically operated valve with built in passages, which directs the air to one tower. The air is then passed through the tower and comes out in dry condition. The air is then passed through after filter to remove any carry over dust, via non-return valve. There is a by-pass arrangement with an orifice, to allow a fraction of dry compressed air to expand and pass through the other tower, here by regenerating it and making it ready for adsorption Cycle. The Regenerating air is passed out to the Atmosphere via muffler. At a preset time, the sequence control timer actuates the Distributor valve to reverse the tower function .

• Features: All GMP model.One spare Fluid Bed Dryer Bowl with S.S. Trolley.Pneumatic lifting arrangement of product container with air filter and control valve.Air-filter housing in S.S. construction.

The brand new KAESER compressed Air Dryer is authentic and competent for an entire drying level. The KAESER Dryer provides ideal drying of the compressed air for better application and operation of all the flow rates. As they are created like the high-end industrial machines, where you’ll get authentic safeguarding against dew destruction for your systems and its working and operations even under the critical conditions. Some of the specific features of KAESER Compressed Air Dryer are- The Compressed air dryer is composed of several types of dryers including Secotec refrigerated dryers, kryosec refrigerated dryers, TX series refrigerated dryers, High- pressure refrigerated dryers, high-temperature refrigerated dryers, etc. The dryer is equipped with solid energy-saving refrigeration dryer along with extraordinary latent heat storage. The dryer stands out in the market in terms of its high-end energy efficiency, compact design and user-friendliness. Long lasting durability- As the compressed air dryer is composed of corrosion defiant air piping and aluminium heat transfer because of which it ensures lifelong durability and strength to its built up. The dry compressed air produced by the compressor ranges from 37.5 to 90m3/min. It has an air and water cooling effect along with an operating pressure up to 16 bars. The optional FE micro filter provides the high level of air purity and also the heatless refrigeration absorption dryers. There’s plenty of potential savings during partial load operation and work pause. It provides the highest level of durability along with little maintenance system manufacturing. Enhanced Compact Built Up- The chamber of the dryer is entirely filled with the phase change material because of which it minimizes the need for storage material to gain the same capacity as of the conventional storage media. Enormous Savings in Limited Load Operation-Built up on the temperature at which the compressed air is cooled by a cycled chamber differs the size of the compressor and hence promote minimal power consumption in the partial load operation. During the limited load operation, the surplus cooling can be stored for a time in the thermal mass for cooling later on without any need for power usage.

Drying solutions to produce cereal based baby foods (weaning foods), drink cereals, brewers yeast, fruits & vegetables, milk powder (for chocolates, gulab jamun & other Indian sweetmeats), also lines for making potato flakes / potato granules, maleic anhydride, phthalic anhydride, etc 

We are considered as one of the most important Fluid Bed Dryer Exporters from India. We present acme quality Fluid Bed Drying Machine that is designed using cutting edge technology. Used for dying purposes, Fluid Bed Dryer is used in various industries like pharmaceutical, dyes, food and chemical industries. Known for its efficacious performance and long life, Fluid Bed Batch Dryers are highly demanded by customers. We provide availability of Fluid Bed Dryer in unlike specifications as per customer demands. ADVANTAGES The conventional drying method for drying products in tray dryers is rather inadequate & troublesome. They also occupy large space & have very high & uneven drying times and also involved high labour input. To over come this problem RIDDHI made Fluid Bed Dryer which is the simple solution to dry the products. SUITABILITIES This compact unit is suitable for drying granular, crystalline, coarse or similar materials in Pharmaceuticals, Dryer, Fine Chemicals & Food & Allied Industries. It is also possible to dry fine crystal or coarse materials in fluid bed dryers. DESCRIPTION Latest improvement in design makes this unit truly GMP model for Pharmaceuticals industries & versatile in operation for other industries like food, dyestuff, chemicals & polymer industry. In GMP models, all the contact parts made out of S.S.304 / 316 material & are provided with isolated panel board. However with standard Fluid Bed Dryers for product containers, retarding chamber are made out of stainless steel materials S.S. 304 only & other parts from mild steel sheet. BATCH SIZE Batch size indicates weights of wet products (inclusive of moisture). Our Model RDFD-30 can take batch size of 30 to 40 Kgs. of wet material. Similarly model RDFD-120 can process 120 to 135 Kgs. of wet material per batch. The weight of materials to be loaded per batch depends upon the bulk density of wet material. OPERATION The wet material is introduced into the dryer as a batch of material in a product container which is provided with air distributor plate & clutch weave. Induced draught is created by the blower & fresh air is sucked into the unit. After filteration, clean air passes through the heating elements. This hot air then passes through the product containers, creating turbulance in the products & hence the product moves up and down known as Fluidization in the product container. Due to this process, the heat transfer is quick and the product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from the dryer. HEATING Fluid Bed Dryer can be supplied in electric heating, steam heating or hot water circulation systems or gas heating system on demand. Electrically heated dryers are provided with electrical heating elements and are suitable to raise air temperatures by about 750 C (i.e from 300 C to 750 C). Similarly steam operated dryers are provided with steam radiator suitable to raise air temperature about 600 C to 750 C depending upon pressure of steam. Generally dryers bigger than RDFD- 60 are incorporated with steam heating system as it is more economical. DRYING TIME The drying time depends upon various factors such as physical properties of material, moisture content, type of moisture (free moisture or water of crystallization), drying temperature etc. The crystalline products can be dried faster than amorphous product containing same percentage of moisture at the same temperature. Generally pharmaceutical granules or crystals containing free moisture of about 20% to 25% can be easily dried in about 30 to 40 minutes at a temperature of about 750C. Certain crystalline materials containing about 40% of moisture can be dried in Fluid Bed Dryer within 35 to 45 minutes. IMPORTANT In case the product contains solvents or inflammable substances, it is essential that the Dryer is steam operated &provided with flame proof motor. Motor The dryer will be provided with with suitable Remi/Hindustan/Sabar or standard ISI make motor of 2800 RPM FILTERATION Single stage filteration of 20 microns PP cloth filter, P.P. filter bag for exhaust air, also multi stage filteration can be given on demand. Positive Earthing Arrangement, explosion flap are given as a part of standard features. Control Panel Pre-wired control panel indicate Digital Timer, Digital Temperature Indicator cum controller(Inlet), Digital Temp. Indicator (Outlet), Sensor, Star-Delta Starter with relay, Indicating Lamps, MCBs, Amp. Meter cum Volt Meter, Selector switch etc. SPECIAL FEATURES Uniformity in drying and reduction in drying time.Atmospheric inlet air is filtered by means of single / multi stage filters of 20 microns to prevent any fine dust to pass through the product.Steam Coil made out of 1” dia. SS 304/316 finned tube & is designed to get pressure of around 3-4kg./cm^2 (working pressure 3 kg/cm^2).Digital temperature indicators cum controller is provided with the unit to indicate the inlet and outlet air temperature as well as to controller the present inlet air temperature.Air suction and discharge dampers provided to control the inlet and outlet air flow.An explosion safety flap of adequate capacity at the rear end of the dryer and an positive earthing point to prevent static charge in the machine are provided.Timer provided to set the process time which will cut off the motor supply after pre-set time period.

The  Rotary Dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer.When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some me where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.Available Capacity  : 100 Kg/hr. to 1000 Kg/hr.Available M.O. : M.S. , S.S. 304, S.S. 316, S.S. 316 L etc.

These three batch type of Vacuum Dryers work on exactly the same principle and belong to the same family.They are, however, suitable for only free flowing materials, which are readily converted from slurry or wet cake to free flowing powder without exhibiting sticking or lump forming properties during the course of drying operations.All the three Dryers are of the Rotary type, having inclined indirectly heated surfaces.The rotary action permits gentle folding and mixing of the material thereby enabling it to come in contact with the indirectly heated surfaces resulting in vapourisation of the moisture in the wet particles.

• Type: Electric hair dryers work by blowing room temperature air in through the vents. The air then passes
• Power: 1000 W
• Material: ABS
• Brand Name: RIOO
• Color: WHITE
• Usage/Application: Professional
• Model Name/Number: RHRD 001
• Current: 5.4 A
• Dimension: 17 X 9X 20
• Frequency: BLOWING RATE : 13 M /S,BLOWING VOLUME - 71 m3/h

Mevish’s Fluid bed dryer is a process unit for preparation of granulated materials for solid dosage forms in batch and continuous batch operations. The system is applied for drying, agglomerations and top spraying upon fluidized bed. Fluid Bed Dryer manufacturers, suppliers and exporters in various capacities & batch sizes. Batch size means the weight of wet product i.e. including moisture / solvent that can be charged in the dryer at a time. In case of very granular or crystalline material the capacity may be increased by about 15 to 20%. Mevish provides several options that can be supplied with Fluid Bed Dryer if opted such as Inflatable tubes, PLC automation control, AC Variator for blower, WIP CIP system, pneumatic damper on ducts, police filter, Scrubber on discharge, steam fittings if steam heater, electrical heater, chilling coil, solid flow monitors, Top spray arrangement with holding tank and peristaltic pump, EX rated FLP construction etc.   SALIENT FEATURES : • Very Versatile Process Equipment For Uniform And Efficient Drying Of Products. • Fully Automatic Operation Based on PLC Control / Without PLC Control • Minimum Handling And More Hygienic • Lifting & Tilting Device Of Product Container For Easy Handling • Capacity Available From 5 Kgs to 500 Kgs. • FLP Models Available As Option • MOC S.S. 304/ 316/ 316L • Option - Steam Heated Or Electric Heated Blower • CGMP Model With Documentation (IQ, DQ, PQ, OQ) - As Option.

Heatless adsorption dryers are used in certain applications where compressed air moisture can damage the process or products. With the use of activated alumina as the desiccant our heatless dryer can produce up to - 400C pressure dew point and can be raised to -700C by using molecular sieves.

A filter dryer is a piece of process equipment used during the filtration and drying phase of a pharmaceutical, bio pharmaceutical or chemical process for an active pharmaceutical ingredient or other compounds production. Filter Dryers are designed for washing and isolating solids with or without integrated containment systems.

• Type: Hair Dryer
• Material: Plastic, HDPE, LDPE, PVC, PP
• Application: Personal, Parlour
• Color: White, Black, Red, Grey, Brown, Blue, Orange, Green
• Power: Electric
• Feature: Quick Dry, Attractive Designs, Light Weight, Hanging Loop, Stable Performance, High Air Flow, Auto Heat Resistant, Energy Saving Certified, Low Power Consumption
• Warranty: 3months, 6months
• Brand Name: Philips, Nova.Samsung, Bajaj, Syska

The DMH series Liquid Line Filter Driers are designed to protect the refrigerant system from liquid and solid contaminants. They incorporate a specially formulated desiccant blend of molecular sieves and activated alumina providing very high mechanical strength, outstanding filtering capability, high moisture, adsorption and acid removal. DMH series is recommended for refrigeration, freezing, air-conditioning systems and for mobile refrigeration.

• Brand Name: Metwiz
• Capacity: 5 liter
• Usage/Application: Spray drying powder
• Material: SS
• Model Name/Number: MW-SD01

Established in Mumbai(India), we are capable of catering to the demands of the customers within the committed time. Noteworthy Supplier of Industrial & Municipal Sludge Dryer, we are customers' favored option in this domain.

Cashew nut dryer ( oven )- borma electric 1. Capacity - 30 kg 2. Capacity - 60 kg 3. Capacity - 100 kg 4. Capacity - 125 kg 5. Capacity - 150 kg 6. Capacity - 250 kg 7. Capacity - 500 kg 8. Capacity - 750 kg 9. Capacity - 1000 kg

The operation of the fluid bed dryer is very simple whereby the drying of the material takes place by forced air circulation inside the chamber. The atmospheric air is drawn through the air micron filter by a specially designed blower mounted on the top of the dryer. The clean air then passes through the heating elements (electric cheater / steam / thermic fluid radiator) to reach the required temperature. The hot air then passes through the product container and the product gets dries faster by air fludization. The air circulation is controlled by means of dampers. A Filter bag provided inside the drying chamber prevents the finest of particles of the material from entering the air stream. The main chamber is provided with on explosion flap to protect against pressure buildup inside the chamber. Digital temperature controller for the inlet air and temperature indicator for the outlet air comes as a standard. Higher capacity models are provided with automatic operation like automatic bag shaker timer, pneumatic damper (butterfly valve) operation, process timer, sampling valve with bottle, etc is provided as a standard. Fully automatic operation with data logging through a PLC is provided as an option. For higher capacity models, the blower can be detached for mounting in the service area to reduce noise level and isolate maintenance from the production area. Granulation Line:- Fluid Bed Dryer Manufacturer In India with a highly versatile machine for drying of granules, crystalline & coarse powders and similar materials for the pharmaceutical, chemical, food, dyestuff and allied industries. Salient Features: All contact parts are S.S. 316 quality and the bottom chamber, blower chamber explosion chamber, supporting structure, trolley, etc are of S.S. 304 quality. Automatic pneumatic bag shaking with timers and butter fly valve (optional for lower models) Pneumatic discharge ensures quick and complete discharge of the material fro the container. Pneumatic lifting for product container (optional for lower models) Temperature controller for electrical heaters / steam radiator. Quick action butterfly valve ensures that the systems is totally contained and enclosed. Explosion flap with aluminum / calf gasket to protect from pressure building inside the chamber. Optional: PLC automation with printer for data logging. Solid particle detection system or tarn bag detections system. Pneumatic lifting for product container (optional for lower models) Differential pressure gauges to monitor pressure across inlet air filter and filter bags. Positive earthing arrangement with low voltage relay. Inflatable silicon gasket for the filter bag and the product container.

luid bed dryer are found throughout all industries, from heavy mining to food, fine chemicals and Pharmaceuticals and sugar indu Fluid bed dryer are found throughout all industries, from heavy mining to food, fine chemicals and Pharmaceuticals and sugar industry. It is stationary equipment, provided with FD and ID pans, with various capacities from 15T/hr to 50T/hr along with dust catching system. They provide an effective method of drying relatively free flowing particles with a reasonably narrow particle size distribution. In general, fluid bed dryers operate on a through-the-bed flow pattern with the hot air passing through the product perpendicular to the direction of travel. The dry product is discharged from the same section.   Advantages of FBD High rate of heat transfer is achieved with almost instant evaporation Batch / continuous flow material is possible Moisture reduction from 1,5 %to 0.02-0.03% In fluid bed drying, the heat and mass transfer rates are faster by a magnitude of one Sugar temperature should be close to wet bulb temperature of air, This allows gentle drying without caramellsation of sugar The gentle drying and cooling process brings with it an excellent product quality, especially with regards to brightness of the product The enlarged cross-section above the fluid bed reduces dust discharge Stationiry type / no hopper movement reduces crystal breakage Lower maintenance due to absence of moving parts

• Features: Heating fluid temperature Slope of drier Speed of drier Airflow in drier

Can operate either as batch type or continuous type drier. We can operate either as batch type or continuous type drier. Operates at low power – Maximum of 5 HP Drying time around 25% that of Tray Drier – Saves production time. Temperature can be positively controlled anywhere between 35 to 200° C Very economical – Material cost can be controlled as instead of a SS shell, M.S. shell with SS lining can be used. Totally contained system – Evaporate fumes can be directed to the desired position. Product can be cooled before discharging – Time saving as product can be directly sent for packing.

The purified air is heated by either steamelectricThermic Fluide. The hot air passes through the product container having diffuser plate and stainless steel sieve. Due to the hot air steam the wet product gets fluidized. The material gets surrounded by hot air and gets dried due to rapid transfer of heat. The moist air passes through the filter bag to the exhaust dust.