Dryers Dealers in Bhandup West, Mumbai

• Material: SS316, Hastelloy C
• Driven Type: Electric
• Condition: New
• Application: Filtration and Drying
• Certification: CE Certified
• Warranty: 1yrs
• Country of Origin: India

Volume: 1 ltrs to 100 ltrs slurry volume Filtration Area: 0.005m² to 0.5m² Removable filter basket, size from 5μm to 20μm Design pressure: -1 to 4 bar Design Temperature:  -20°C to 150°C Materials: SS316, Hastelloy C etc. Surface finish: Ra < 0.8 μm or 400 grit inside/electropolishing Transport & separation process takes place in single unit Reduced product exposure as all operation takes place in single unit Real-time model-predictive process control for the comparison of different agitation regimes & different operating conditions such as vacuum pressure, nitrogen flow, jacket temperature & cake volume, together with comparison of different solvents Vacuum contact drying & through-circulation convective drying possible Application: TheseANFD systems are used for drying and filtration of various media including precious metals, various chemicals from slurries, pharmaceutical Intermediates, Food, flavours & fragrance industry, Edible oil deodorization & deacidification, Hazardous materials filtration, Moisture removal & solvent recovery, Precious metal & other catalyst recovery, Fine & speciality chemicals, Polymer devolatilization, Microsphere separation & purification in R&D centers, pilot plants & manufacturing facilities of fine & speciality chemicals, bulk drug (API) pharmaceuticals, dyes, intermediates, paints, oils, agrochemical, petrochemicals, oil & gas, chemical research institutes / colleges etc.

In the Oil Lecithine Drying unit, the recovering of fatty acids and other volatile matters are done. The deoderizor is also equipped with a vapor scrubber to minimize the pollution load. The system is designed to prevent the entry of volatile matters enter the deodorizer. There are varieties of products produced from soy processing; lecithine is also one of the important constituents along with others, which get extracted along with oil during extraction process. These are the phospholipids (gums) having phosphorus with nitrogen (amine group), in glyceride chain in place of one of the fatty acid group. Soy lecithin is edible used in various confectionaries, bakery products and pharmaceutical industry for coatings. This is a very good emulsifier used in making of margarines. If extracted oil water de-gummed early and the hydrated gums dried immediately then the quality of lecithin produced becomes good, that is lighter in color and less in acid value and peroxides too. So, its necessary have wet lecithine drying along with de-gumming plant. Capacity of lecithin drying plant is depending on the de-gumming unit capacity.

• Material: HDPE
• Certification: CE Certified
• Weight: 100-200gm, 200-300gm, 400-500gm
• Color: Available in Many Colors
• Automatic Grade: Automatic
• Power: Electric

Avishkar Enterprises offers premium quality Automatic Hand Dryers. We offer 100% Automatic Hand Dryers that are made using the most advanced touch free technology. Automatic Hand Dryers are the best to maintain a hygienic, dry and clean environment in the washrooms. We offer a wide assortment of elegant looking Automatic Hand Dryers in different designs, sizes and capacities at the market leading prices.

• Brand Name: Imported
• Color: White
• Material: ABS

"All in One" Compact Dryers

We are offering compressed air dryer.compressed air dryer is one of the major products of the company. Our compressed air dryer is equipped with the new compressor. This compressed air dryer is also equipped with inbuilt compressor protection facility to have durability in the long run. We offer it at the market leading rates. Compressed air dryer employs the advanced coil-in-coil technology, where in you have one tube inside another tube. This arrangement enables transfer of heat between the refrigerant and the compressed air. For refrigerated air dryers, the temperature differential between the air and the refrigerant causes absorption of heat energy from the air; hence, reducing the temperature of the compressed air. This causes the moisture to condense. featuresnew compressorinbuilt compressor protectionoverload protectionpolished enclosureadvantageeconomicalhigh performancebalances temperature balances moistureproduct detailsemerson-copeland / hitachi (optional) compressornew compressor (most of the competitors use r type (repaired) cheaper ones for cost reduction)reciprocating / rotary (optional) technologyall metal (crca powder coated / ss 304) enclosureinbuilt compressor protection for long lifeinbuilt mcb overload protectionbi-color powder coated / ss 304 buffed and polished (optional) enclosureapproved by cipla, dr reddy’s, aurobindo, dabur, godrej, raymond, iitspecialtyduex refrigerated dryers provide a constant pressure dew point +2 – 5 °c.employs the developed coil-in-coil technology (one tube inside another tube)moisture separator in order to remove the condensed moisturefor every 20°f drop in temperature of the compressed air the moisture holding capacity of the air reduces by 50%.

Standard compressed air enters to the Air to Air heat exchange, where it is pre cooled by out going cold dry air. Highly effective pre cooler reduces the temperature considerably, and enable to use smaller & economical refrigeration system. Then the pre cooled, relatively low temperature compressed air enters to Air to Refrigerant heat exchanger, where it is cooled down to +3°C (Pressure Dew Point). At this temperature, moisture in vapour form condensed to liquid form, and separated from the compressed air by moisture separator and discharged to drain port through automatic drain valve. The cold dry compresses air passes back to Air to Air Heat Exchanger, and gain temperature by exchanging heat with incoming warm air. The dry air coming out from the dryer is ready to use for instrumentation and process air applications.

PSA/Desicant Air Dryer:Standard compressed air enters to PSA unit where all the impurities like: moisture, CO, CO2 etc are removed to produced clean dry air upto -60° dew point. Refrigerated Air Dryer:Standard compressed air enters to the Air to Air heat exchange, where it is pre cooled by out going cold dry air. Highly effective pre cooler reduces the temperature considerably, and enable to use smaller & economical refrigeration system. Then the pre cooled, relatively low temperature compressed air enters to Air to Refrigerant heat exchanger, where it is cooled down to +3°C (Pressure Dew Point). At this temperature, moisture in vapour form condensed to liquid form, and separated from the compressed air by moisture separator and discharged to drain port through automatic drain valve. The cold dry compresses air passes back to Air to Air Heat Exchanger, and gain temperature by exchanging heat with incoming warm air. The dry air coming out from the dryer is ready to use for instrumentation and process air applications.

We offers a wide range of Industrial Spray Dryer. Available in an array of shape and sizes, our Industrial Spray Dryer are made using superior grade raw materials. Our Industrial Spray Dryer is fabricated as per the international standards and is well reputed for their durable and anti corrosive features. Salient FeaturesSuperior qualityEasy operationSmooth functionalityHigh tensile strengthDurable Used inPharmaceutical industriesChemical industriesFood industries

• Dryer Capacity: 5Kgs to 500Kgs
• Batch Size: 5Kgs to 500Kgs
• Type: Fluid Bed Dryer
• Condition: New

A Fluid Bed Dryer with latest improvement in design makes this unit a truly versatile one for pharmaceutical, food, dyestuff, chemical and polymer industries. All contact parts are made of S.S.304316 and are provided with isolated control panel. Due to induced draft created by specially designed heavy duty fan the atmospheric air is drawn through the 5-micron air filter. 5Kgs to 500Kgs

• Condition: New
• Material: Stainless Steel
• Wind power: 3400-13600m3/h

We settle the financial transactions with our customers through the secured payment procedures. We also settle down upon a variety of negotiable instruments. Every item in our range is manufactured utilizing premium supplies sourced from renowned traders. Therefore, our products are reliable.

• Material: Stainless Steel And Mild Steel
• Country of Origin: Made in India
• Automation Grade: Semi-Automatic
• I Deal In: New Only
• No. of Tray: 6-24 Tray 

Drying oven is fabricated of rigid angle/square pipe frame with double walled panels insulated with best quality compressed fibre glass. It is provided with a rigid door fitted with strong hinges and best choosen locking arrangement. A control panel is fixed in front of the oven to facilitate its operation. It has a large working space and is available in good matt surface finishing (in synthetic / enamel colours for non gmp). Inner walls are SS-304 / 316 as required.The Drying ovens are electrically heated and thermostatically controlled. It can be fitted with timer to facilitate working day and night. Dryers are well accepted for fast & economical drying of powders, bottles & other materials.   Optional : Available in STD/GMP models Construction SS 304 / 316 / 316L Flame proof motor & panel Intrinsically safe earthing system Chart Recorder device for temperature Control Panel with PLC control

steam laundry dryers, alternatives dyeing machinery

In the pelletizing process, in many cases the pellet cutting operation occurs underwater- in particular with the USG strand pelletizing and SPHERO underwater pelletizing systems. For these applications,Lunarmech has developed the following types of pellet dryers.   AERO impact dryers CENTRO centrifugal dryers   PRINCIPLE OF PELLET DRYING The drying operation as part of the pelletizing process consists of 3 individual steps Pre-dewatering: up to 95% of process water is removed by gravitational force Primary drying: water drops adhering to the pellets are largely removed through airflow or mechanical movement Final drying: The residual heat of the pellets is used to evaporate the remaining surface moisture   THE Lunarmech ADVANTAGE Impartial advice on the optimal drying solution as per customer needs All machine parts coming into contact with the product are corrosion resistant Wide range of operating capacities from small quantities up to 22000 kg/hr. For virgin polymers and compounds; cylindrical and spherical pellets; products with any fillers or reinforcements; standard size and micro pellets   For more information on our Dryers, contact us now to speak to one of our technical consultants

• Power: 1200 W
• Material: Plastic
• Voltage: 220 V

• Type: Vibro Sifter
• Material: Stainless steel and Mild Steel
• Country of Origin: Made in India
• I Deal In: New Only
• Automation Grade: Semi-Automatic

• Capacity: 6 in trays
• Material: Stainless steel
• Model: VTD 6
• No. of shelves: 6