Dust Collector Parts Dealers in Military Road, Mumbai (89 products available)

• Type: Electrical
• Color: Blue
• MOQ: As per client requirement
• Quality: Superior

With us, one can stay assured for safe deliveries as we make use of premium material for packaging the lot. Also, we make sure that the material is sourced from the trusted places only. Based in Mumbai(India), we have gained wide appreciation owing to our high quality products and client-centric approach.

Fresh air is drawn in by means of a fan. The air is then passed through a filter and heated to produce warm air by use of electric heaters. If the product contains a solvent or inflammable substances, the dryer must be operated using steam and provided with a flame-proof motor. The heated air passes through the product container which has diffuser plates and a sieve. Due to the stream of air, the wet product gets fluidised. The material gets surrounded by the hot air and gets dried due to heat transfer. Moist air passes through a filter bag and an exhaust duct. The Fluid Bed Dryer is not suitable for drying of liquids or pastes.

• Power Supply: Single Phase AC220V - 240V, 50/60HZ0H
• Motor’s RPM: 32,000RPM
• Air pressure (Kpa): 23.7Kpa (230V) /25.2Kpa (120V)
• Air flow (L / Min): 3750L/min (230V) / 3660L/min (120V)
• Output Power: 1251W (230V) / 124W (120V)
• Current: 5.2A (230V) / 10A (120V)
• Noise Leve: MAX.55dB
• Suction Level: 1-9 step
• Dimensions (Body): 295mm (W) X 330mm (D) X 250mm (H)
• Modal: Table Top

• Material: MS SS
• Brand Name: Deepti
• Driven Type: Electric, Mechanical
• Color: Blue
• Condition: New
• Automatic Grade: Automatic, Manual
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Application: Dut collector
• Certification: ISO 9001:2008
• Voltage: 380V, 440V
• Minimum Particle Size: 10 microns
• Type: Air Pollution Control Equipment
• Weight: 1000-2000kg
• Warranty: 2years
• After-Sales Service Provided: Yes
• Country of Origin: India
• Industrial: Equipment

We are offering dust collection machine. Features: long lasting inlet with single dust collection bag. Sturdy suction motor. Cloth fitter bag of 5 to 10 micron with extra paper bag. Easy to fit under work bench. Down time for replacement of fitter bag 5 minute. Pvc fitting & pipe offered with machine. Silencer for lesser noise. Locking facility. Dim : 18” dia x 18” ht.

The KA system is designed for conveying and de-dusting the material, releasing filtered air into the work environment and cutting down noise emissions. Available in six models to satisfy all plant engineering requirements. The conveyor system is equipped with easily accessible and renewable filter cartridges. The system is modular, sturdy and compact, to adapt to all plant solutions. Accessories: antistatic bars, metal separators, DPM measuring devices. safeties conform to EC standards. Automatic and independent operation or can be interfaced with granulator/shredder. Models: • KA04 • KA07 • KA012 • KA110 • KA145 • KA350 Technical data: • Designed for conveying and dust removal of materials with filtered air release into working ambient • A large number of different models to meet all requirements • Negative pressure transport to reduce material dust and noise emissions • Transport systems with filter cartridges which are easy to access and renew • Robust and compact modular structure which can be adapted to any plant layout • Accessories: antistatic bars, metal separators, DPM measurers • Safety in compliance with EC standards • Automatic and independent operation or interfaceable with granulator/crusher Designed for: • Can be paired with a conveyor system

• Impeller Diam.: 125 to 240 mm
• Air Flow: 175 to 1200 m3/hr.
• Input Voltage: 110, 220, 440 V AC (50/60 Hz.)
• Power Input: 20 to 350 W

 These Blowers normally use forward curved impellers made of galvanized steel, which are press fitted on the Rotor of External Rotor Motor, making the unit compact. Single inlet signifies that the Air is drawn from one side of the Blower only. The Rotor with impeller is dynamically Balanced in two planes, for vibration free running during its entire life. The assembly of Motor and Impeller is essentially mounted in a technically designed Housing for optimum performance. The External Rotor Motor is cooled with the air stream flowing over it.   Blowers Range From :

• Wind Volume:: 2.3m/min
• Input Power:: 1080W
• Voltage: : 110v/220v
• Frequency:: 50/60Hz
• No Load Speed: : 16000r/min
• Size/Qty:: 53*48*44cm
• Net Wight : : 17.46 Kg

• Type: Dust Collectors
• Weight: 100-1000kg
• Color: Grey
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric

Dust collectors are used in many processes to either recover valuable granular solid or powder from process streams, or to remove granular solid pollutants from exhaust gases prior to venting to the atmosphere. Dust collection is an online process for collecting any process-generated dust from the sourcepoint on a continuous basis.   Dust collectors may be of single unit construction, or a collection of devices used to separate particulate matter from the process air. They are often used as an air pollution control device to maintain or improve air quality.   Parts Fabric filters generally have the following parts: Clean plenum. Dusty plenum. Bag, cage. venturi assembly. Tubeplate. RAV/SCREW. Compressed air header. Blow pipe. Housing and hopper.

• Pressure :: 2” WC to 25” WC
• CAPACITY:: 500 CFM to 50000 CFM
• Brand Name: FIBROTECHNIKS

We are offering diverse range of gas blowers with following specification: capacity : 500 cfm to 50000 cfm. we design gas blower as per client's requirement. We manufacture and supply complete air exhaust blower unit after testing. these gas blowers are manufactured in pp+frp/pph+frp/pvc+frp/pvdf+frp/frp/frv/grp etc. our impellers are dynamically balanced as per is standards. Impellers are fabricated in pp or frp. impellers are fabricated in clockwise and anti-clockwise directions as per the client's requirements. pressure and type of gas blowers are as follows type : direct drive coupling drive vee belt drive.

Compressed Pads manufactured from Knitted Wire Mesh are highly effective to absorb the heat, vibrations, sound. It is light weight, efficient & compact & has application in various Industries.

We are one of the successful centrifugal air blowers manufacturers. These centrifugal air blowers are corrosion resistant, having high impact strength and are easy to machine. They are manufactured using thoroughly checked, peak quality rigid PVC/Polypropylene + FRP. We provide these high working capacity multistage centrifugal blowers in variety of sizes; ranging from 500 cfm to 10000 cfm. These centrifugal blowers are user friendly and highly cost effective in operation. They are mostly used in laboratory, fume cupboards, pickling plants, electroplating industries, reaction vessels, and process rooms for corrosive, hazardous fumes removals & scrubbers. Striving at providing a prolific deal to our customers we provide these high quality centrifugal blowers on very nominal rates.

Shakti Fabricators offers a range of Stainless Steel filter Bag cage in a variety of shapes and specifications to choose upon. These bags are manufactured in bulk and comply with the all industry specifications and standards. FEATURES 10 Wire Filter Bag Cages Carbon Steel Bag Cages Split-Section Cages 12 Wire Bag Cages Galvanized Bag Cages Corrosion Resistant Cages Special Coatings & Finishes High Pressure Bag Cages Bottom Removal 20 Wire Bag Cages Stainless Steel Bag Cages Top Removal Heavy Duty Filter Cages Reinforced Filter Cages Manufactured Bag Cages Standard Bag Cages

HIGH PRESSURE BLOWERS ARE IDEAL FOR COMBUSTION AIR , PRODUCT COOLING , PRESSURE BOOSTER , FURNACE BLOWERS, FOUNDRY CUPOLAS , GLASS COOLING , DRYING OVENS , SMOKE ABATEMENT LIQUID AGITATION , CHIP BLOWING ETC.

• Technical Details: Power consumption: 3.75 kW Production: up to 600 kg/hr
• Features: High efficiency dust separator at the end of the cleaning line installation Effectively removes even

The Truetzschler Dustex DX is a high efficiency dust separator that effectively removes micro-dust particles at the end of the cleaning line installation. The Dustex improves the efficiency of downstream processes and ensures longer lives of clothings and spinning components, thus increasing economic efficiency of the overall installation.

• Impeller Diam.: 190 to 225 mm
• Input Voltage: 110, 220, 440 V AC (50 & 60 Hz.)

These Fans use Backward Curved Impellers made of Steel or Engineering Plastics. The impellers are press fitted on the External Rotor Motor and dynamically Balanced in two planes. Backward Curved Fans can be used with or without scroll Housing, and find its application in sucking operations, and where static required at Fan Inlet is high.

• Airflow (m3/h or CFM): Compound Saw Dust
• Material: Mild Steel
• Bag Capacity: 30kg
• No. of Bags: 2 Bag

» Strong Suction Motor» Single & Double Suction inlet available» Cloth filter bag of 5 to 10 micron with additional paper bag in which dust can be collected» Can be easily fitted under work bench» Down time for replacement of filter bag 5 minutes» PVC fitting & pipe will be provided with machine.» ln-built silencer for noise reduction» Locking facility» Very Silent machine» Dim : 15" x 22" x 16" (LxBxH) Approx. Specification of SQDC 1 : » Suction motor: 3/4 Hp, 440V » Starting Amp: 1.7 Amp » Running Amp: 1.1 Amp » Also available in single phase 220Volts » CFM : 250 » Sound Level : 45db Approx.

pullman industrial fans, blowers & exhausters, owing to their high efficiency and good workmanship, are widely used by various industries like chemicals, fertilizers, pharmaceutical, plastic, food processing, steel, mining, textile, engineering, research laboratories, hospitals and hotels, wood-working unit, cement plants epic. these are available in different materials of constructions such as ms, ss and aluminum etc. Depending upon the working conditions: and are classified and are recommended on the basis of the applications, following are the types of pullman fans, blowers & exhausters. pullman centrifugal high pressure blowers applications : these are extensively used and are most suitable for pneumatic conveying systems, flotation systems, liquid agitation,air slide fans for cement plants and numerous process applications requiring high pressures as well as for delivering air blast to furnaces, boilers etc.range: capacity up to 50,000 cmh. And pressure up to 1,500-mm. W.g.construction: constructional features are similar to those of blowers and exhausters but however, the impeller is of backward curved design which is suitable for developing high pressure. pullman centrifugal medium pressure blowers applications: used for fume extraction, dust collection, pneumatic & material conveying and in various process applications.range: capacity up to 1,00,000 cmh. & pressure up to 500-mm w.g.construction:. Supplied in only (sisw) & are fabricated in heavy gauge steel sheets with adequate framing of ms angles, drilled flanges are incorporated at inlet & outlet.the impeller, depending on the type of use, could be of backward inclined or radial design, statically & dynamically balanced for minimizing vibrations, drive arrangements in which blowers & exhausters are supplied are direct drive, direct drive through coupling or v-belt drive to suit specific requirements. pullman centrifugal low pressure blowers applications: these are suitable for industrial ventilation requiring high volumetric flow rates at low pressures.range : capacity up to 5,00,000 cmh. And pressure up to 150-mm w.g.construction: fans are available either in single inlet single width ( sisw) or double inlet ( didw) type ~ fabricated in mild steel sheets and stiffened by means of ms angles, at inlet & outlet drilled flanges are incorporated for easy connection of the fan to the system. the impeller is of backward inclined design, statically and dynamically balanced and mounted on the shaft by means of cast iron hub. Drive arrangement could be direct or through v-belts depending on a specific requirement.

• Features: High resistant capacity against chemicals, Reliable, Highly durable, Excellent tensile strength, Available in various shapes and sizes

We offer filter bags, all types of filter bags and cages, membrane filter bags, all types of high temp filter bags, cages and accessories. Our filtrations bags are used widely. They are made from different type of fibre. These include fibreglass, synthetic materials, silicon, etc. These are nonwoven filter bags. Fireproof materials can also be customised for the bags. These come with best finish.

Most of the factories / Giant Industrial Sheds, handling light Powder Type Material like Sugar, Salt, Milk Powder, Granules, Fibers, etc. are facing serious problems of Dust Pollution. It requires heavy manpower for cleaning floors / machine and this Pollution problem becomes very serious, sometimes causes Fire Casulaties Loss of Human Life requires huge maintenance of Electro-Mechanical machines and equipments. We have designed very scientific, unique Low Cost portable dust collector equipment and solved the very tiresome problems, eliminating the manual cleaning of Floor. It is specifically very useful in Sugar House Cleaning, where the Sugar Dust gets deposited, lot of Sugar falls from Hoppers, Bucket Elevators, Graders, and Bagging Points. The Sugar / Dust needs to be collected frequently. It adds further Dust Problem / Pollution, serious damages to Electricals / Windings, additional man power for maintenance and leads High Risk of Fire, due to dust being highly inflammable. This Unit helps in, faster cleaning of spread or fallen sugar on floor and dust deposits on various equipments. Similarly during Off-season, a series of Electrical Panels / Switch Gears in Power House need high pressure Blower to clean accumulated fine Dust.   Necessary coupling, connections & nozzles are provided for converting the Vacuum Cleaner into high-pressure Jet Blower / Dryer. Hence the utility of this Portable Unit is very well justified.   APPLICATIONS: Industries like  Sugar  Paper Pharmaceuticals  Paint & Pigments  Fertlizer  Cement  Leather  Cosmetics  Agriculture / Seed Processing Ornaments Mfg  Petro-Chemicals  Ceramic: Abrasive Sand, Powder, horts Grit, Metal Powder, Tiles  Food: Sugar, Spices, Tea, Salt, Biscuit, Cattle Feed, Grain, Starch  Chemicals: Caustic Soda, Lime, Detergent, Sunmica, Plywood.

• Country of Origin: Made in India
• Body Material: Steel
• Brand Name: Phoenix
• Application: Commercial
• Material: FRP
• Blade Material: Aluminium
• Capacity: 2300 cfm
• Speed: 1500 rpm

We are offering Multi Cyclone Dust Collector that consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet. Multi-clones operate on the same principle as cyclones–creating a main downward vortex and an ascending inner vortex. Multiclones are more efficient than single cyclones because they are longer and smaller in diameter.The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of the dust particles. The pressure drop of the multiclone collectors is higher than that of single cyclone separators. Applications • Steel Industry Blast Furnace, Electric Arc Furnace, BOF, etc • Fertilizer Industry Phosphate Rock Dryers & Calciners, Dryers • Non-Ferrous Copper Reverberatory Furnace, Laea Blast Furnace • Pulp & Paper Lime Kilns, Back Liquor Recovery, Bark Boilers • Sugar Industry Boiler Flue Gas, Bagging Section • Mineral Products Asphalt Stone Dryers, Cement Kilns • Pharmaceuticals Tablet Coating Fans, etc  

Almost every second factory is facing serious Sugar Dust Problem, resulting in coating of dust on sugar grain due to presence of fine dust in bagging. More over the spreading of dust in Drier/Sugar hous eis not only causing serious Dust Pollution but also a sheer loss of product due to dust generated in sugar handling. The system arrest the Fine & Flying Dust, generated during drying, conveying, sizing, bagging & ensure the work area clean, free from dust build up eliminates the risk of fire and Mechanical/Electrical damages otherwise take place due to dust emission. The dust so recovered is recycled and yields additional recovery. Dust collection is a continuous and on-line process in which specially designed suction hoods are placed close to the generation of dust. The exhaust extracted by the suction hood is carried to a separation device Wet Scrubber above, through a network of ducting, finally disposed off by mixing it in recirculating water. We have successfully solved the Dust Problem as well as improved the Luster Quality of Sugar in 40 Factories.and enjoying the TREMENDOUS BENEFITS of installations. The average dust collected in almost all factories is found 125 kgs. on every 1000 quintals of sugar produced / bagged in Sugar House. We are the only top dust collector manufacturer giving the best machinery with the below features. SALIENT FEATURES OF SMB’s VENTURI TYPE SUGAR DUST COLLECTION SYSTEM: 1) High Efficiency dust collection system effectively arrest particles up to 5 micron.2) Hoods & entry to Dust collector is designed to eliminate entrainment of dust.3) Ventury type Cyclonic Wet Scrubbers are almost ideal for large amount of abrasive fine dust.4) Complete Remedy for sparks / risks of fire, frequent damages of Electricals & bearings.5) Almost 100% collection of Flying Dust, Cooling effect at Pan Station & comfortable climate.6) The State-of-the-Art Technology, Computerized Design for Scrubber & Fan for Durability & smooth performance.7) Four Important Tasks Working, Environment, Economy, Seasonal returns & Negligible Maintenance are being considered for System Design..

• Usage: Liquid Filter,Centrifuge Filter Bags,solid-liquid separation
• Type: Mesh Filter Bag
• Pay Mode Terms: T/T (Bank Transfer)
• Dimension(L*W*H): 330x330x690MM

The operation of the fluid bed dryer is very simple whereby the drying of the material takes place by forced air circulation inside the chamber. The atmospheric air is drawn through the air micron filter by a specially designed blower mounted on the top of the dryer. The clean air then passes through the heating elements (electric cheater steam thermic fluid radiator) to reach the required temperature. The hot air then passes through the product container and the product gets dries faster by air fludization. The air circulation is controlled by means of dampers. A Filter bag provided inside the drying chamber prevents the finest of particles of the material from entering the air stream. The main chamber is provided with on explosion flap to protect against pressure buildup inside the chamber. Digital temperature controller for the inlet air and temperature indicator for the outlet air comes as a standard. Higher capacity models are provided with automatic operation like automatic bag shaker timer, pneumatic damper (butterfly valve) operation, process timer, sampling valve with bottle, etc is provided as a standard. Fully automatic operation with data logging through a PLC is provided as an option.

Bag filters have a simple quick opening system that allow change of filter bags to be completed such that vessel are out of use for minimum possible time. Bags can be extremely durable. Air filters are used for separating solid particles from air on suction side of fan, compressor machine, etc.