Electric Control Panels Dealers in Midc, Mumbai

• Application: Automobile
• Phase: Three Phase
• Material: Mild Steel
• Frequency: 50/60Hz

We have manufactured PLC panels Modicon PLC for LARSEN & TOUBRO LTD control & Automation Division - Mahape for the following customers: Indian Oil Corporation Ltd (IOCL) LAB Plant - Baroda. Chedha Paper Limited, - Calcutta. Songo Gas Development (Tanzania) National Thermal Power Corporation (NTPC) - Ramagundam Bhillai Steel Plant - Bhillai Nuclear Power Corporation (NPC) - Tarapur Ramrupai Steel

PCC & MCC Panels, Motor Control Panels, Drive Panels, Changeover Panels, D.G. Set Control Panels, Auto Sychronising & AMF Panels, PLC & SCADA Based Panels.

Automatic power factor panel a reliable solution for elimination of penalties and cost reduction in electricity bills. Manufactured to be used in the AC power distribution system, these panels increase power while reducing the circuit loss, improving the output of the transformer in order to guarantee an economically orientated motor.

As a trusted name, we always make sure that our products are properly packed and remain free from damage during transit. For this, we have hired an adroit team of experts having immense experience in packaging. Our team of experts is capable of entertaining the voluminous orders in shortest time possible.

• Type: Solar Panel
• Certification: CE Certified
• Application: Industrial, Toproof
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power Source: Solar
• Warranty: 1Year
• Solar power: 1Kw, 250W, 500W, 750W

• Application: Production/ Lab

technical specifications   1) dimmer controlled variable line voltage. the test panel in dynamic mode feeds dimmer controlled variable voltage, upto the rated load current and gives indication of voltage, current, wattage & frequency on individual digital indicators.   2) temperature measurement. digital temperature indicator with suitable sensor for the specific application for the measurement of temperature upto 1200 °c.   3) rpm measurement. digital rpm indicator along with sensor suitable for the application for the measurement of speed upto 9,999 rpm./30,000 rpm   4) high voltage breakdown. useful for the measurement of breakdown voltage of the appliance under test. test voltages available are 0-3kv/5kv.30/100ma. indication of the test voltage & test voltage & test current are provided on digital indicators   5) earth contact resistance test. e c r tester feed 0-30 amps continuously adjustable current through the earthing line & thereby gives the value of earth contact resistance.   6) insulation test. digital insulation tester applies 500 v d c across the measurement terminals and displays the value of insulation.   7) digital leakage current test. digital leakage current tester suitable for measuring the leakage current from line or neutral to the body of an appliance under test.   8) resistance test. digital ohm meter with four wire measurement system allows accurate & precise resistance measurement   9) life endurance test. depending on the type of appliance can be provided which will keep the item under test on for the desired adjustable duration & off for the desired adjustable duration. digital counter counts on/off cycles

• Brand Name: SanaTech Automation
• Application: Building Distribution Control Panel
• Body Material: Mild Steel
• Phase: Three Phase
• Voltage: 230-415 V
• Frequency Range: 50-60 Hz

Desk & Simplex Type Design * Mimic on Roof Top * Controlling entire process from Centralized Control Room with process status. 

• Body Material: Mild Steel
• Phase: 2 Phase
• IP Rating: IP55
• Coating Type: Powder Coating
• Operating Voltage: 210-415 V

SS / MS / FRP / FLP Panels Customised as per requirement Integrated with PLC, HMI, Barriers, VFD etc. HMI’s with screen size 3.5" to 15" PLC’s from AB / FUJI / Mitsubishi / Siemens / Schneider, etc Desk type / Floor standing / Wall mount 

The Pioneers in India and a leading manufacturer of an extensive range of Explosion proof equipment that is innovation driven and is committed to carve a niche for itself as a renowned Ex equipment manufacturer, in the global market. Baliga Lighting has come a long way since inception in 1960 and gained the reputation of being a quality benchmark in Indian Industry.

• Features: Precisely designed ,Flawless finish,Compact design Longer service life

• REV/ FOR WARD CORRECTIONS: 110VAC AND 230VAC

We are offering electric control photo cell units are in ffs machines and bisuit packing machines. This controller with print mark scanner gives proper registration so as to achieve good finished products.it's give auoto correction for packing products at it's line of control.

Supported by our flourishing business processes, we are able to offer finest quality PLC Automation Control Panel. The offered panel is manufactured with the help of basic material and advanced tools in adherence to set industrial standards. Further, it is thoroughly checked on numerous parameters by skilled quality analysts assuring its flawlessness at user’s end. Our offered panel is applicable for controlling and monitoring instruments in different industries such as mechanical, automotive, textile, etc. Features: Heat resistance Compact design Easy to operate

  In Most Of The Industries, Due To The Fluctuating Load Conditions, The Power Factor Also Varies Accordingly. Hence It Is Practically Difficult To Maintain A Penalty Free Power Factor With Fixed Compensation Of Capacitors. This Results In Low Power Factor And Leads To Higher Kva Demand And P.F. Penalties.Due To Variable Load Conditions And Cumbersome Manual Switching Of Capacitors The Power Factor Can Not Be Maintained At Desired Levels. As Close Monitoring Of Power Factor Is Required All The Time To Avoid Penalties And To Minimize The KVA Demand, Automatic Power Factor Correction Panels Are The Best Solutions.The Panel Are Manufactured Using Micro Controller Based Control Relay To Control The Capacitor Switching. All The Settings Are Done By Finger Tip Key Pad With Options To Select “FIFO” Of “CYCLIC” Order And Many More.The Panels Are Made Based On Study Of Your Load And Perfect Tuning Is Possible To The Requirement Of Your System.   Advantages Of Automatic Power Factor Panels :    Avoids Power Factor Penalties. Reduces KVA Demand Avoids Leading Power Factor. Avoids Over Excitation Of Generators.  Minimizes Line Losses. Minimizes Transformer Losses. Protects Motors, Switchgears From Improves Voltage Conditions.

When the snatch block of the crane reaches its top position the snatch block pushes a plate which is hanging from one end of the lever of the limit switch. Due to the weight placed on the other end of the lever this lever is pushed up. When the lever is pushed up the shaft to which this lever is connected rotates there by rotating the cams which eventually open the contacts and disconnect the motor. The electronic limit switch contacts are automatically reset when the lever returns to zero position due to gravitational force

who have been in the business of manufacturing Control panel Accessories in India for over (20) years The group as a whole has many diversified interests ranging from manufacture of Control panel Accessories to design

PMCC Technical specification: Rated Service Voltage: 415 V Rated Frequency: 50h Rated Insulation Voltage: 660 V Busbar System: TP-E or TPN-E   (with isolable neutral) Max.Rating Of Busbars: 6000 A Fault Level Withstand: 50 ka /  65 ka FOR 1 SEC Degree Of Protection: ip 41/ 54 Proven interleaved busbar system for PCC / PMCC Concept: In conventional busbar system, conductors of each phase are grouped together. At higher current ratings in each phase, more than one flat of busbars placed quite close to each other are used. Skin effect & Proximity effect, causes uneven current distribution in each flat of the same phase which also results in unequal temperature rise in different phases. At higher currents increase in cross-sectional area of conductors does not yield proportionate increase in the current carrying capacity of the busbars. The interleaved busbar system offers a cost effective solution. Cable termination:     Cable Termination is at the rear of the panel. Elecmech Standard PCC / PMCC panel dimensions are more than sufficient, However Panels can be custom designed for adequate space for termination of increased number aluminium cables for special cases such as for Material Handling Applications Stacker Reclaimer, etc. Though Bottom Cable Entry is Standard, TOP cable entries are possible, and in some non-standard cases with bottom busbar chamber Wide cable alley facilitates comfortable termination of a large number of cables. Shrouded link work for multi-tier configurations ensures complete safety in the cable alley. Standard panels are provided with captive screws / Quarter turn knobs. However customized Panels can be provided with Alphabetical Key lockable doors to prevent un-authorized access to the cable alley. Cabling Space (mm) Power Cables:  600 X 500 (depth 1200)  600 X 600 (depth 1300)  600 X 700 (depth 1400) Control Cables: Control Cables Terminals are provided vertically at the rear side panel on the left. So there is ample space for control cabling. Add on chamber: The cabling area can be extended further by providing an ADD ON CHAMBER to accommodate more cables if needed. Compartmentalised Design For ease of Maintenance and trouble free operation, Elecmech offers standard Single Tier ACB panels upto minimum 550 width, However Multitier designs are also offered for switchgear rooms with space limitations and for cost effectiveness.   Standard Single Tier: for ACBs 630 to 6300A. Multi-Tier Arrangement: 2 tier arrangement for ACBs upto 1600A. PMCC:  8 feeders (fuse switches) in a panel. Flexibility in Compartment sizes. Compartment sizes can be 225 to 900 mm. Auxiliary Equipment Mounted by the side of ACB. Effective utilisation of space. Separate Chambers for Busbars, Droppers Auxiliary Busbars. Panels can be offered confirming to Form 2 / 3 / 4. Other PCC features  The Power Control Centre (PCC) is a free standing and floor mounting type switchboard, suitable for indoor installation. To facilitate transportation, each PCC is split into shipping sections. Each shipping section is wrapped in an HDPE cover and packed in a wooden crate case. To arrive at the approximate overall dimensions of the packing cases, add 300 mm to the dimensions of the respective section. Each vertical panel is divided into distinct compartments Viz busbar chamber, Vertical droppers, Control busbar chamber, d/o feeders / fixed feeders, power cabling chamber at rear with control terminals. The compartments house main equipment like Air Circuit Breakers, Fuse Switches, Moulded Case Circuit Breakers and associated auxiliary equipment. Compartment doors are provided with Sprin Loaded Quarter Turn door fasteners, Which pressurises the door towards the panel frame, ensuring dust-proofness by the compression of gasket between door and panel frame. The cable alley doors are removable type. They are provided with Spring Loaded Quarter-turn locks or can be provided with door locks operable by a special key. Overall Dimensions Weight: 2475. Width : 550, 600, 700, 800, 900, 1000, 1100, 1200, 1300 mm. Depth : 1000 mm (base frame), 1200 mm, 1400mm 1600mm w/o front door. Depth : 1044 mm (base frame), 1244 mm,1444, 1644 with front door and rear door /cover. To increase cabling area, Add-on-chambers with a depth of 300 mm may be provided on rear. Add-on-chambers may also be used for bus duct entry. Relays are accommodated, usually below ACB compartment. usually it is of 450mm / 500 mm Height. Safety interlocks: All PCC feeders incorporate Safety interlock, Unless the ACB is racked out to isolated position, its compartment door cannot be opened. Conversely, the ACB cannot be operated unless the compartment door is closed. However, to facilitate maintenance and inspection, a defeat feature is provided for both these interlocks. Only QUALIFIED PERSONNEL are permitted to use the interlock defeat mechanism. Copper Busbars can also be provided on request. Aluminum Busbar used are of electrolytic E91E grade with manufacturer’s test certificate Busbars are punched using Multihole punching hydraulic press. The Multihole punch and die is specially deisgned for punching upto 4 Holes in one stroke with minimal burrs and no distortion of busbars. Punched Joints are then buffed smooth with special buffing tools to remove Aluminum oxide Layer. The Buffed aluminum busbar is then immediately coated with abrasive antioxidation paste. Excess paste squeezes out of the joints when the al bus joint is tightened removing aluminum oxide and also prevents the aluminum from being oxidized. Aluminum busbars are fastened using High Tensile Hardware High Tensile Fastners are tightened using adjustable and calibrated Torque wrench for optimum tightening torques. Thus optimum pressures are applied to Aluminum at fishplates and Joints ensuring minimal joint resistance and thus reducing heat loss and temperature rise. Non compromising Quality & Reliability Elecmech Panels are built to last for 20-25 year design life. Panels are Powder coated in our recently installed 11 Tank Hot process pretreatment powder coating plant which provides best possible degreasing derusting, phosphatising treatment for ms fabricated panels. Uniform powder coating quality is ensured by our stringent QC process. Standard interlocking schemes are available in our wide database for 2-Incomer, 1-Buscoupler and 3-Incomer with 2-buscouplers, also with standby generators. Standard protection schemes are available in our wide database for transformer incomers, outgoing feeeders with numerical relays from various manufacturers and also conventional relays. ERDA / CPRI Type Tested Panels with valid certification

• Application: Cool Room
• Working Voltage: 220VAC +- 10%,50/60Hz
• Temperature Resolution: 0.1deg C
• Power Consumption: Less than 5w

Panel Switch Distribution Board Accessories: Din Rail Channels & End Clamps, Bus Bar Supports, Door Hinges, Locks, Keys, Handles, Fans & Filters, Document Holders, Neutral Links, Neutral Link Base, PVC Trunkings, Spacers, Grommets Closers, Porcelain Connectors Etc.

We are offering automatic power factor controller. Nippen model uno+ is used for measurement and control of pf using reactive power compensation. Capacitor banks are suitably switched on and off automatically to provide necessary compensation. An intelligent switching algorithm (wear leveling) ensures uniform aging of the capacitors used to achieve the target pf. an alarm function ensures protection of capacitor banks against abnormality in voltage, current and sets value of capacitors whenever these are beyond the higher and lower threshold limits. Ct polarity is automatically sensed internally in the event of reverse connection.

he appearance of the male and female model edge puf panel are designed and structure in layer to ensure a perfect and securely sealed joint between the puf panels. this technique will prevent condensation on the joint between the puf panels. This technique will prevent condensation on the joint whether is caused by inside air leakage. 

• Type: Electrical Panel
• Material: Aluminum, Metal, Steel
• Shape: Rectangle, Square
• Certification: ISI Certified, ISO 9001:2008
• Application: Factories, Home, Industries, Mills, Power House
• Color: Black, Gray, White
• Frequency: 50Hz, 60Hz
• Connection Type: 4 Way, 6way, 8way
• Feature: Dust Proof, Fire Resistant, High Mechanical Strength, Light Weight, Maintenance Free, Shock Proof, Weatherproof
• Phase: Double Phase, Single Phase, Tripple Phase

The efficiency, hygiene and life of a cold room depend on the panels and accessories that go into making up the structure. Blue Star's cold rooms are therefore constructed using pre-fabricated PUF panels designed specifically for such applications, and manufactured to international standards of quality and reliability at state-of-the-art facilities. These panels are packed with advanced high-density foamed-in-place PUF insulation to ensure high-efficiency insulation, and metal-finished (a choice of aluminium, pre-painted steel, stainless steel, galvanised steel or Galvalume). Modular in nature, these tongue-and-groove panels in a range of thicknesses and dimensions, are designed to interlock with ease at site to form cold rooms of any size and for any application. Each part of the cold room - walls, ceiling, floor, doors and even T-walls and corners - have special panels designed for the purpose to ensure perfect fit. These modular cold rooms are not just easily assembled at site. They are easily disassembled too and moved when required, or even enlarged or split into multiple rooms as later needs may demand. A range of options and accessories ensure that the entire cold room supplements the efficiency and ruggedness of the PUF panels: Flush-fit doors: Aesthetic, efficient, heavy-duty flush-fit doors with FRP door perimeter Cam lock: Posi-loc locking assemblies that provide perfect alignment of walls, ceiling, floor, corners and door frames Hardware: Heavy-duty cast alloy handles and hinges with attractive brushed-chrome finish Heated air vent: Tri-action heated air vent to eliminate pressure and vacuum variations inside the walk-in cold room Interior and exterior ramps: Ramps allow ease of movement of material without damage to floor Sweep gasket: Airtight heavy-duty sealing gasket below door with a double sweep, remains flexible at any temperature Posi-seal closure: Cushions closing of door, making it noiseless and firmly shut Vapour-proof light fixture: Trouble-free lighting within cold room This wide range of world-class panels and accessories ensures that Blue Star's cold rooms are air-tight, hygienic, highly energy-efficient and built for a lifetime.

• Voltage: AC 220 V ± 20% AC, 380 V ± 20% AC, 110V± 20% DC, 12 V ± 3 V DC 24 V ± 4 V
• Frequency: (50± 1) Hz, (60± 1) Hz
• Features: Variable Auto Transformer, Ammeter, Digital Temperature Indicator, Switches, Pilot lamps and Fuses.

• Usage: EOT CRANE
• Mounting: Floor

electrical medium voltage panels