Electric Control Panels Dealers in Saki Vihar, Mumbai

• motor voltage: 230V AC and 110V DC/220V DC

We offer half panels and sub-cubicles for 11kV. The VCB is ‘draw out’ type and can be racked out directly on the floor. VCBs are type tested according to International Standards IEC-62271 at renowned laboratories. They are compact, safe and reliable. The sub-cubicle is VCB with its compartment having all safety interlocks. The half panel is an assembly of the medium voltage compartments except for low voltage compartment.

We are open to receiving payment online as well as through traditional payment methods. Our terms and conditions for payment are transparent and we advise patrons to abide by them. We have developed state-of-the-art storage facility, laced with all the necessary amenities, required for maintaining high-quality standards.

• Size: Multisizes
• Type: Electric Control Panels
• Color: Grey
• Material: Mild Steel
• Power Source: Electric
• Autoamatic Grade: Fully Automatic

• Type: Solar Panel
• Certification: CE Certified
• Application: Industrial, Toproof
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power Source: Solar
• Warranty: 1Year
• Solar power: 1Kw, 250W, 500W, 750W

• Application: Automobile
• Phase: Three Phase
• Material: Mild Steel
• Frequency: 50/60Hz

• Brand Name: SanaTech Automation
• Application: Building Distribution Control Panel
• Material: Mild Steel
• Phase: Three Phase
• Voltage: 230-415 V
• Frequency Range: 50-60 Hz

L&T completes its product basket with a range of MV switchboards. All medium voltage switchgear, ranging from 3.3kV to 36kV are manufactured, assembled & tested at L&T’s advanced Switchgear Works – the Works are equipped with a SF6 gas handling laboratory. All the operations & processes implemented at our Works are in accordance with international norms.

We designed and manufactured AC/DC Drive panels of ratings up to 300 KW for Cement, Metal , Chemical and material handling Industries for LARSEN & TOUBRO LTD control & Automation Division - Mahape for the following customers: Indian Oil Corporation Limited Indo Bharat Rayon (Indonesia) Rajshree Cement J.K Cement Birla Cement L&T Cement Sunflag Iron Steel Jindal Steel (Hisar) Songo Gas Development (Tanzania) NALCO

• Features: Precisely designed ,Flawless finish,Compact design Longer service life

We are pleased to introduce ourselves as a leading manufacturer of instrument control Panels. We have till date supplied a variety of control panels to a large cross section of industry. A few highlights are specified in the foregoing pages.     1) Product range of instrument panel division   Product range of our instrument panel division suitable for different degrees of protections. These are classified as follows :-  1. Simplex panels.  2. Duplex panels with walk way.  3. Curved graphic panels.  4. Cubicle type panels.  5. Desk type panels.  6. Semi-graphic panels, with mimic on acrylic, fiberglass or mosaic tiles.  7. Full graphic panels.  8. Instrument racks.  9. PLC panels. 10. Relay based panels. 11. Purged panels. 12. Explosion proof panels. 13. Analyzer shelter for hazardous location. 14. Intrinsically safe systems. 15. Weatherproof panels. 16. Pneumatic interlock panels. A) Pneumatic well-head shutdown panels for off-shore oil platforms. B) All types of pneumatic logic panels for diesel engine driven pumps, compressors and generators. We have also supplied in past control room instrumentation panels for pneumatic controllers,recorders & indicators of reputed makes like Taylor, Foxboro, Kent etc.    2) Services Offered By Us :       For instrumentation purpose, our service include the following :-  1. Basic design & engineering.  2. Technical advice.  3. Selection/Sourcing of equipments & systems. 4. Detailed engineering. 5. Application software development. 6. Manufacture of panels. 7. Integrated testing of system. 8. Erection at sites. 9. Pre-commissioning checks.10. Assistance in plant commissioning.11. Post sales support.12. Post warranty support.   3) List of Consultants with whom we are registered :     We are approved suppliers of Instrument Control Panels for the following leading consulting engineers through   whom we have executed several projects.  

• Type: Addressable Fire Alarm
• Application: Office
• Brand Name: Ravel, Honeywell, Cooper, Notifier, Morley, Apollo
• Voltage: 24VDC
• Material: MS
• Zones: Multi Loop

• Type: Electrical Panel
• Material: Aluminum, Metal, Steel
• Shape: Rectangle, Square
• Certification: ISI Certified, ISO 9001:2008
• Application: Factories, Home, Industries, Mills, Power House
• Color: Black, Gray, White
• Frequency: 50Hz, 60Hz
• Connection Type: 4 Way, 6way, 8way
• Feature: Dust Proof, Fire Resistant, High Mechanical Strength, Light Weight, Maintenance Free, Shock Proof, Weatherproof
• Phase: Double Phase, Single Phase, Tripple Phase

c. The control panel provides the user the option of running the de-reeler in auto as well as manual mode. It is also having a speed adjustment facility. In addition, it also provides a re-wind feature.

PCC & MCC Panels, Motor Control Panels, Drive Panels, Changeover Panels, D.G. Set Control Panels, Auto Sychronising & AMF Panels, PLC & SCADA Based Panels.

Our organization has successfully expanded its business in the market owing to the offered elevated quality array of Electrical Control Panel. The Electrical Control Panel is used for controlling and monitoring instruments in different industries. We offer this panel in a number of technical specifications in order to meet vast necessities of our valuable clients. Clients can avail this panel from us at an affordable price. Features of Electrical Control Panel:- Optimum functionality Sturdy construction Low maintenance

•  Features: IP44, IP52, IP55 and IP65 Protection Classes,1.6 - 2 mm thick MS CRCA, SS304, SS316 sheet construction, RAL7032 and RAL7035 paint shades, Integrated Sound Alarms

• REV/ FOR WARD CORRECTIONS: 110VAC AND 230VAC

We are offering electric control photo cell units are in ffs machines and bisuit packing machines. This controller with print mark scanner gives proper registration so as to achieve good finished products.it's give auoto correction for packing products at it's line of control.

Our PCC Single Front Drawout Panel is of one of the best qualities and is highly demanded all over. We have a wide range of Panels with Starters & switches which consists of Industrial Electrical Control Panel, Electrical Power Control Panel, etc. We use one of the best quality parts to manufacture our products so that there is no compromise in their quality. We provide our panels at the most competitive prices possible. We also deliver well within the stipulated time avoiding all delays. Because of our high quality standards, we have also become one of the leading Exporters from the country.

Drawout Panels, electrical enclosures, single front drawout panels

who have been in the business of manufacturing Control panel Accessories in India for over (20) years The group as a whole has many diversified interests ranging from manufacture of Control panel Accessories to design

• Material: Mild Steel
• Phase: 2 Phase
• IP Rating: IP55
• Coating Type: Powder Coating
• Operating Voltage: 210-415 V

Low Voltage Bus Bar Assemblies, Arc Chamber Tube, Epoxy Cast Housing

We are offering solar panel 2w upto 300w polycrystalline.

we are offering solar panel. 1. solar panels, batteries & inverters 2. stationary items 3. textbook printing 4. exercise books 5. bicycles motor bikes 6. tools 7. crepines (sandfilters) 8. scooter bikes spare parts 9. printing inks & accessories 10. furniture 11. scrap (tyreshmsbottles) 12. jute gunny bags

• Voltage: AC 220 V ± 20% AC, 380 V ± 20% AC, 110V± 20% DC, 12 V ± 3 V DC 24 V ± 4 V
• Frequency: (50± 1) Hz, (60± 1) Hz
• Features: Variable Auto Transformer, Ammeter, Digital Temperature Indicator, Switches, Pilot lamps and Fuses.

PMCC Technical specification: Rated Service Voltage: 415 V Rated Frequency: 50h Rated Insulation Voltage: 660 V Busbar System: TP-E or TPN-E   (with isolable neutral) Max.Rating Of Busbars: 6000 A Fault Level Withstand: 50 ka /  65 ka FOR 1 SEC Degree Of Protection: ip 41/ 54 Proven interleaved busbar system for PCC / PMCC Concept: In conventional busbar system, conductors of each phase are grouped together. At higher current ratings in each phase, more than one flat of busbars placed quite close to each other are used. Skin effect & Proximity effect, causes uneven current distribution in each flat of the same phase which also results in unequal temperature rise in different phases. At higher currents increase in cross-sectional area of conductors does not yield proportionate increase in the current carrying capacity of the busbars. The interleaved busbar system offers a cost effective solution. Cable termination:     Cable Termination is at the rear of the panel. Elecmech Standard PCC / PMCC panel dimensions are more than sufficient, However Panels can be custom designed for adequate space for termination of increased number aluminium cables for special cases such as for Material Handling Applications Stacker Reclaimer, etc. Though Bottom Cable Entry is Standard, TOP cable entries are possible, and in some non-standard cases with bottom busbar chamber Wide cable alley facilitates comfortable termination of a large number of cables. Shrouded link work for multi-tier configurations ensures complete safety in the cable alley. Standard panels are provided with captive screws / Quarter turn knobs. However customized Panels can be provided with Alphabetical Key lockable doors to prevent un-authorized access to the cable alley. Cabling Space (mm) Power Cables:  600 X 500 (depth 1200)  600 X 600 (depth 1300)  600 X 700 (depth 1400) Control Cables: Control Cables Terminals are provided vertically at the rear side panel on the left. So there is ample space for control cabling. Add on chamber: The cabling area can be extended further by providing an ADD ON CHAMBER to accommodate more cables if needed. Compartmentalised Design For ease of Maintenance and trouble free operation, Elecmech offers standard Single Tier ACB panels upto minimum 550 width, However Multitier designs are also offered for switchgear rooms with space limitations and for cost effectiveness.   Standard Single Tier: for ACBs 630 to 6300A. Multi-Tier Arrangement: 2 tier arrangement for ACBs upto 1600A. PMCC:  8 feeders (fuse switches) in a panel. Flexibility in Compartment sizes. Compartment sizes can be 225 to 900 mm. Auxiliary Equipment Mounted by the side of ACB. Effective utilisation of space. Separate Chambers for Busbars, Droppers Auxiliary Busbars. Panels can be offered confirming to Form 2 / 3 / 4. Other PCC features  The Power Control Centre (PCC) is a free standing and floor mounting type switchboard, suitable for indoor installation. To facilitate transportation, each PCC is split into shipping sections. Each shipping section is wrapped in an HDPE cover and packed in a wooden crate case. To arrive at the approximate overall dimensions of the packing cases, add 300 mm to the dimensions of the respective section. Each vertical panel is divided into distinct compartments Viz busbar chamber, Vertical droppers, Control busbar chamber, d/o feeders / fixed feeders, power cabling chamber at rear with control terminals. The compartments house main equipment like Air Circuit Breakers, Fuse Switches, Moulded Case Circuit Breakers and associated auxiliary equipment. Compartment doors are provided with Sprin Loaded Quarter Turn door fasteners, Which pressurises the door towards the panel frame, ensuring dust-proofness by the compression of gasket between door and panel frame. The cable alley doors are removable type. They are provided with Spring Loaded Quarter-turn locks or can be provided with door locks operable by a special key. Overall Dimensions Weight: 2475. Width : 550, 600, 700, 800, 900, 1000, 1100, 1200, 1300 mm. Depth : 1000 mm (base frame), 1200 mm, 1400mm 1600mm w/o front door. Depth : 1044 mm (base frame), 1244 mm,1444, 1644 with front door and rear door /cover. To increase cabling area, Add-on-chambers with a depth of 300 mm may be provided on rear. Add-on-chambers may also be used for bus duct entry. Relays are accommodated, usually below ACB compartment. usually it is of 450mm / 500 mm Height. Safety interlocks: All PCC feeders incorporate Safety interlock, Unless the ACB is racked out to isolated position, its compartment door cannot be opened. Conversely, the ACB cannot be operated unless the compartment door is closed. However, to facilitate maintenance and inspection, a defeat feature is provided for both these interlocks. Only QUALIFIED PERSONNEL are permitted to use the interlock defeat mechanism. Copper Busbars can also be provided on request. Aluminum Busbar used are of electrolytic E91E grade with manufacturer’s test certificate Busbars are punched using Multihole punching hydraulic press. The Multihole punch and die is specially deisgned for punching upto 4 Holes in one stroke with minimal burrs and no distortion of busbars. Punched Joints are then buffed smooth with special buffing tools to remove Aluminum oxide Layer. The Buffed aluminum busbar is then immediately coated with abrasive antioxidation paste. Excess paste squeezes out of the joints when the al bus joint is tightened removing aluminum oxide and also prevents the aluminum from being oxidized. Aluminum busbars are fastened using High Tensile Hardware High Tensile Fastners are tightened using adjustable and calibrated Torque wrench for optimum tightening torques. Thus optimum pressures are applied to Aluminum at fishplates and Joints ensuring minimal joint resistance and thus reducing heat loss and temperature rise. Non compromising Quality & Reliability Elecmech Panels are built to last for 20-25 year design life. Panels are Powder coated in our recently installed 11 Tank Hot process pretreatment powder coating plant which provides best possible degreasing derusting, phosphatising treatment for ms fabricated panels. Uniform powder coating quality is ensured by our stringent QC process. Standard interlocking schemes are available in our wide database for 2-Incomer, 1-Buscoupler and 3-Incomer with 2-buscouplers, also with standby generators. Standard protection schemes are available in our wide database for transformer incomers, outgoing feeeders with numerical relays from various manufacturers and also conventional relays. ERDA / CPRI Type Tested Panels with valid certification

  In Most Of The Industries, Due To The Fluctuating Load Conditions, The Power Factor Also Varies Accordingly. Hence It Is Practically Difficult To Maintain A Penalty Free Power Factor With Fixed Compensation Of Capacitors. This Results In Low Power Factor And Leads To Higher Kva Demand And P.F. Penalties.Due To Variable Load Conditions And Cumbersome Manual Switching Of Capacitors The Power Factor Can Not Be Maintained At Desired Levels. As Close Monitoring Of Power Factor Is Required All The Time To Avoid Penalties And To Minimize The KVA Demand, Automatic Power Factor Correction Panels Are The Best Solutions.The Panel Are Manufactured Using Micro Controller Based Control Relay To Control The Capacitor Switching. All The Settings Are Done By Finger Tip Key Pad With Options To Select “FIFO” Of “CYCLIC” Order And Many More.The Panels Are Made Based On Study Of Your Load And Perfect Tuning Is Possible To The Requirement Of Your System.   Advantages Of Automatic Power Factor Panels :    Avoids Power Factor Penalties. Reduces KVA Demand Avoids Leading Power Factor. Avoids Over Excitation Of Generators.  Minimizes Line Losses. Minimizes Transformer Losses. Protects Motors, Switchgears From Improves Voltage Conditions.

The Pioneers in India and a leading manufacturer of an extensive range of Explosion proof equipment that is innovation driven and is committed to carve a niche for itself as a renowned Ex equipment manufacturer, in the global market. Baliga Lighting has come a long way since inception in 1960 and gained the reputation of being a quality benchmark in Indian Industry.