Electric Room Heaters Dealers in Mumbai

We offer the broadest selection of stocked Immersion Heaters in the industry. Technical Specification: Available in 1000W220V singledual element Length of the Heater can be from 11" to 36" Fin thickness: 0.3-0.4mm Max length: 6000mm Fin height: 3-10mm Material: Nickel-chromium

• Type: Instant Electric Water Heater
• Certification: CE Certified
• Voltage: 440V
• Condition: New
• Power Source: Electric
• Warranty: 1year
• Brand Name: Veito

Blue E has been engineered from the ground up for efficient performance. It is designed to installeffortlessly in your house. It provides hot water to the shower, kitchen or anywhere you need. Theheating elements in Blue E are designed with enormous attention to detail, and are assembledwith extreme precision and care. You can set the heating power to different levels by using theknob on the device. Safe and reliable to use with an energy efficiency class A with IP rating 25. FEATURE Analog knob temperature adjustment Fully electronically controlled Multi-point usage Hot water in seconds Energy efficient Space-saving design Over heat protection Solar compatible

• Voltage: 230 V
• Country of Origin: Made in India
• Power: 12 to 48 Watts
• Brand: Economyheaters
• Is It Portable: Non Portable
• Heater Material: Silicone
• Features: Corrosion resistance, Lightweightm High performance

Tubular elements used for heating liquids (corrosive and non-corrosive) are known as immersion heaters. For corrosive medium, sheath of the element can be enclosed in metallic or non-metalic Element casing made of special alloy can be used for longerlife of the element. Available in ranges of 1 KW to 4.5 KW with adaptor fittings 1" B.S.P to 21/2 " B.S.P threaded brass flanges duly nickel Chromium plated. Heaters high rating are available on request with flanged connections. The Photographs are those of water 7 oil immersion heaters simultaneously. Applications Air-conditioning Pharmaceutical Chemical Textile Nuclear and many more industries.

We are offering immersion heaters. These are mainly for water, oil, alkaline, etc applications made as per customer requirement. The length and the wattage will vary as per the need.

ENERGYPACK compact small size electrically heated thermic fluid heating  system suitable for R & D laboratories. Operating temperature up to 200 C.

• Voltage: 230 V
• Phase: Single Phase
• Heater Material: Plastic And Mild Steel
• Size: 8inch(Length)
• Frequency: 50 Hz
• Power: 1000 W

• Power: 220v-240v
• Heating Element: Heating Wire
• Driven Type: Electric
• Features: Easy Installation, Portable
• Pack Type: Carton Box
• Usage: Currency

Safeguard Liquid carry over in the downstream of vaporizer. Used for Nitrogen, Oxygen, Argon and CO2 22, 45 and 67 kw Cast aluminum block with stainless steel tubing Digital temperature control Automatic solenoid shut-off to control minimum temperature outlet Removable, cartridge heater rods Over-temperature safety switch

The Medium Duty Electric Models Feature:   Fully Automatic Controls—Fast acting surface-mount thermostat forautomatic temperature control. Factory installed sensitive manual resetenergy cut-off for safety to prevent overheating. (Maximum thermostatsetting is 185°F Direct Heat Transfer With Three Immersed Incoloy Elements—Transfersheat directly and efficiently to the water. Screw-in style element. Factory Installed Hydrojet® Total Performance System—Cold water inlet sediment reduction device helps minimize sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up at top of tank. Vitraglas® Lining—Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. The Bradford White high silica Vitraglas® lining provides a tough interior surface for our hot water tanks. 2" Non-CFC Foam Insulation—Covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiency and jacket rigidity. Water Connections—11⁄4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Conversion Kits—Design certified by UL for field conversion. Conversion kits are available to convert any one model to a variety of voltages, kW inputs and wire phase. (kit part numbers on reverse side.) Protective Magnesium Anode Rod—Provides added protection against corrosion for long trouble-free service. Steel Tank—Heavy gauge steel automatically formed, rolled and welded. T&P Relief Valve—Supplied.  Brass Drain Valve.

We are offering electric drum heater that is used to melt material within the drum that can be extracted or removed. The standard drum size is 200 kg that is fitted with side heaters and bottom heaters. Flp control panel is available separately with the unit and is fitted with the digital control to ensure accurate temperature control. We have drum heater in which entire drum is inserted and semi-solid materials can be liquefied. Our ms electric drum heater is available with separate temperature control panel that can wall-mounted. types flameproof drum heater non-flame proof drum heater features heaters are fabricated flame proof by covering the various heating elements with s.s. Tube insulated with m. G. O. Powder.ptr 100 ohms sensor is available in the sensor for the exact measurements of temperaturestandard 9 k.w. Load is applied to the drum heatertemperature controller ensure that temperature does not shoot up beyond set valueworking temperature of the drum heater is 150°c max..

We are reckoned as one of the chief Manufacturers, Exporters and Suppliers of Electric Panel Heaters from India. Electric Panel Heaters are fabricated using the latest manufacturing technology as per the set industry standards. Available in customized specifications, this Electric Panel Heater is supplied with all necessary accessories for hassle-free installation. It features an adjustable thermostat that facilitates precise control of the heat output. Simple to operate and modify, our Electric Panel Heater controls energy costs.

We present to you, Immersion Heaters. The corrosive medium, sheath of the element can be enclosed in metallic or non- metallic element casing, made of special alloy, which can be used for longer life of the element. Available in a diverse range, the high rating Immersion Heaters are available on request with flanged connections. Avail the Immersion Heaters in ranges of KW to 4.5 KW with adaptor fittings 1� B.S.P to ½� B.S.P

The new generation of electric instant tankless water heaters is again a striking proof of Vaillant´s leadership in innovation. The VED Electronic is extremely comfortable and efficient and tailored to individual demands and provides a superior experience for performance showering. It is an easy-to-operate, easy-to-install and easy-to-service appliance. The VED is electronically guided and the outlet temperature can be regulated in a step-less manner and and stays constantly up to the performance limit. Any fluctuations in the water pressure are electronically balanced and the desired water temperature is adjusted at the temperature selector. Output models 13-18 kW, 18-24 kW, and 27 kW ElectronicVED with electrical performance adjustment, stepless temperature regulation and output temperature stability up to the performance limit Flat design: 481 x 240 x 99 mm (height x width x depth) Installation system Pro I for maximum service and installation ease Adaptable to solar water heater system & heat pump for pre warmed water for appliances up to 24 kW

  We are one of the leading  Electric Thermic Fluid Heater Manufacturer in India. Our Electric Thermic Fluid Heaters are fully automatic in mode and thus very easy to operate and control. They are offered in both vertical as well as horizontal coil types. Our Thermic fluid heaters are highly efficient because the elements are totally immersed in thermal fluid and the jacket is fully insulated with high density insulation. The ETFH is designed and manufactured using high quality heating elements, precise dimensions in a state-of-the-art manufacturing facility. Our quality control guarantees highest safety and long life span. The main difference between this heater and a gas or steam boiler is the energy source which used to heat the thermal fluid upto the required temperature. While a gas, oil or diesel boiler has a burner which sprays or injects the fuel, in case of electric thermal fluid heaters, there is no flame as the heat is provided by electrical resistors.  Use of low Watt density flanged electric heaters maintain low heat flux densities. The surface area provided is generously sized to keep thermic fluid film temperatures low, which protects the thermic fluid from carbonizing.   Our electric thermal fluid heaters are supplied as a compact unit on a platform containing all equipment components like Heater unit , thermic circulating pump, various isolating valves, its interconnecting piping etc including the expansion tank. These heaters are suitable for upto a maximum temperature of 300 deg centigrade.They are available from a range 6 KW to 120 KW.

• Material: Mild Steel
• Power: 1500 W
• Voltage: 220 V
• Shape: Cylindrical
• Country of Origin: Made in India
• Frequency: 50 Hz
• Phase: Single Phase
• Usage/Application: Industrial
• Max Pressure: 0.8 Mpa
• Surface Finish: Powder Coated

 design these are made from chromium plated brass tube, check nut fixing type for horizontal mounting in tank. It is made of diameter, length and load as per requirement.   usage            immersion heaters are used in tank process

• Application: Heating
• Certification: CE Certified
• Voltage: 220V
• Power Source: Electric
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts

We are the main supplier of this product.

NDY08-18-9 NDY08-18-9 is one of electric heater, which belongs to the electrothermal membrance series.   Outlook design 1.Side cord-concealed structure; 2.Equipped with humidification water tank   Safety protection 1.Tip-over switch, safe and reliable; 2.Overheating protection;   Humanized design 1.Three kinds of power optional to satisfy different needs of temperature; 2.Select special heat-conducting oil, more environmental friendly and quiet;

• Voltage: 4500V
• Capacity: 10 L
• Mounting Type: Vertical
• Power (Watt): Above 4000 W
• Color: White
• Dimensions (W x D x H): 190X190X340 "

Uses : Immersion heaters are the heaters which are used mainly for heating water, oils, mineral oil, vegetable oil, fuel oil, chemicals, alkaline, acidic & non-acidic solution kept in tanks.Construction : The immersion heaters are sheathed in S.S. or mild steel or incoly tube or copper as per the requirement. The dia of tube is available from 8.2 mm dia onwards. This heater is fitted to the tank through a check nut for horizontal (through the side) mounting or with flange for vertical (over the side)  mounting. The size of check nut or flange is 11/4 " to 21/2 BSP.Electrical Data : In any voltage & wattage depending upon the surface area of heaters.Working Temperature : The temperature of immersion heater could go upto 600°C depending upon sheathed material & process application.

Introducing Andris Lux - a masterpiece in electric storage water heaters that’s a real class apart. Every day is an opportunity unknown and the beginning of something beautiful. To make the most of your day, all you need is a great energetic start to your morning. For the last 50 years, Racold, the leading specialist in geysers and water heaters, has helped you begin your day with that spurt of refreshing energy in style. With the Andris Lux geyser, that style has evolved into art. The exquisitely crafted Andris Lux geyser, designed by world renowned Italian designer Umberto Palermo, is his vision of elegant and stylish design for bath spaces in India. The unique square design, state-of-the-art features and affordable price tag makes this stunning water heater an unbeatable value for money.

In Electric brooders, the capital investment is lower as compared to other types of heaters. This type of heaters are more suitable for small firms.

Heater consist of a mild steel vessel having a flanged body for bolting directly to the wall of storage tanks. A flanged outlet is fitted to heaters as standard and an oil return may also be fitted. The outlet being on the right-hand side as shown in the drawing. Heater shrouds are vented to prevent air pockets.