Electric Shear Dealers in Mumbai

electric shear

Get Price Quote

Our range of Electric Shear is specifically designed to cut multilayered Aramide, Glass Fiber and other heavy-weight materials. Heavy Duty Electric Shear operates on the principle of conventional hand shear in which the cutting effect is produced by the up and down movement of the upper blade, the edge of which is in constant contact with the edge of the fixed lower blade. The principle employed in the Heavy Duty Electric Metal Shear has the advantage over rotary blade scissor because in that there is no bare shafts for threads to catch and wind up to eventually block the machine.

Portbale Electric Shears

Get Price Quote

• Voltage: 220 V
• Model No.: AMI-3
• Maximum shearing capacity: 3 mm (1/8")
• Number of shear strokes at max. load: 900 per min.
• Number of shear strokes unloaded: 1000 per min.
• Shearing/cutting speed: 2 Mtr. per Min.
• Nominal input: 550 watts.
• Weight (Approx.): 6.8 Kgs.

The portable electric shear model 'AMI-3' is very useful and an indispensable tool in all workshops, assembly line, erection sites, coach building shops, tin smith and alike industries as it is handy, convenient and easily accessible to different types of shearing jobs in various materials upto 3 mm thickness (in M.S. with tensil strength 45kg sqr. mm.) for straight, round, ovel, curved and/or irregular shapes at rapid speed reducing thereby the production and maintanance cost considerably.A moving cutter moves against a stationary one in the anvil. The cutting speed is high and there is no loss of material. While a shear can be used for splitting sheets where the resistance to bending is not great, they are not recommended for cutting across wide and thick plates. On heavier gauges of material they should be regarded as trimming shears, main portion remaining flat; while the cut portion is bent away beneath the anvil. The anvil is designed so that scribed lines are well in view and are easily followed allowing straight lines and curves to be easily cut. The minimum cutting radius is approximately 3.1/2lnch. Blades are of special die steel and are of simple design. They are of sufficient length to stand fro 10 to 15 grindings. The motor is for intermitent operation and is of fan cooled type, suitable for operation on AC. 220 volts, single phase, 50 cycles with built-in "ON" "OFF" Switch, 2 meter long cable and plug. Extra accessories: Spare blade Carbon brush

BOSCH Shear

Get Price Quote

• Weight: 2.7 kg
• Cutting capacity in steel (400 N/mm²), max.: 2.8 mm
• No-load stroke rate: 2,400 spm
• Material that can be processed: Steel up to 400 N/mm² at 2.8 mm
• Smallest radius: 38 mm
• Stroke rate under load: 1,500 spm
• Tool dimensions (length): 292 mm
• Tool dimensions (height): 205 mm
• Cutting capacity in steel (600 N/mm²), max.: 2.2 mm
• Cutting capacity in steel (800 N/mm²), max.: 1.9 mm
• Cutting capacity in aluminium (200 N/mm²), max.: 3.5 mm
• Rated input power: 500 W
• Power output: 270 W
• Sound pressure level: 79 dB(A)
• Sound power level: 90 dB(A)
• Uncertainty K: 3 dB
• Vibration emission value ah: 16 m/s²
• Uncertainty K: 1.5 m/s²

Portbale Electric Shears

Get Price Quote

• Voltage: 220 V
• Model No.: AMI-3
• Maximum shearing capacity: 3 mm (1/8")
• Number of shear strokes at max. load: 900 per min.
• Number of shear strokes unloaded: 1000 per min.
• Shearing/cutting speed: 2 Mtr. per Min.
• Nominal input: 550 watts.
• Weight (Approx.): 6.8 Kgs.

The portable electric shear model 'AMI-3' is very useful and an indispensable tool in all workshops, assembly line, erection sites, coach building shops, tin smith and alike industries as it is handy, convenient and easily accessible to different types of shearing jobs in various materials upto 3 mm thickness (in M.S. with tensil strength 45kg sqr. mm.) for straight, round, ovel, curved and/or irregular shapes at rapid speed reducing thereby the production and maintanance cost considerably. A moving cutter moves against a stationary one in the anvil. The cutting speed is high and there is no loss of material. While a shear can be used for splitting sheets where the resistance to bending is not great, they are not recommended for cutting across wide and thick plates. On heavier gauges of material they should be regarded as trimming shears, main portion remaining flat; while the cut portion is bent away beneath the anvil.   The anvil is designed so that scribed lines are well in view and are easily followed allowing straight lines and curves to be easily cut. The minimum cutting radius is approximately 3.1/2lnch. Blades are of special die steel and are of simple design. They are of sufficient length to stand fro 10 to 15 grindings. The motor is for intermitent operation and is of fan cooled type, suitable for operation on AC. 220 volts, single phase, 50 cycles with built-in "ON" "OFF" Switch, 2 meter long cable and plug. Extra accessories: Spare blade Carbon brush

electric shear

13,615 Per Piece

• Power Source: Electricity
• Voltage: 220 V
• Brand: V-MAX
• Frequency: 50 Hz
• Metal Sheet Thickness: 1.8 mm
• Cutting Speed: 2 Meter Per Min

Portable Electric Shears

Get Price Quote

Portable Electric Shears, LATHE MACHINE - Undercounter Type

Portable Electric Shears

Get Price Quote

Portable Electric Shears