Electrical Components Dealers in Mahim, Mumbai

• Features: High Tensile Strength, Rapid Wetting
• Dimensions: Diameter 1.5 x 500 mm

Electrodes – Collection Electrodes and Discharge Electrodes These are the components of Precipitators(ESP) used in air pollution control industries to extract the dust and smoke from the air or gas. These electrodes remove the dust elements by using electrostatic force. This process easily extracts 99.9% of the dust from the air. WHAT IS SO UNIQUE ABOUT OUR DESIGN? Our design team after extensive research have developed a special design which is: Cost effective and durable Appropriate for large and medium scale operation Compact design and multiple options are available We have been successfully using it in our plant and are proud to state that our company has met air pollution control norms with our in-house developed ESP. Thus we now would like to fill this gap of cost effective technology product by introducing it to the industry. UNIQUENESS OF OUR DESIGN   1) Collection electrodes Manufactured together with exclusive profile to accommodate quiescent area to avoid re-entrainment connected with airborne dirt and dust in to the air stream. Created upon appropriate moving devices in order to have ideal straightness completely. Layout in order to transfer rapping drive uniformly along the overall plate together with base welded anvil plates. 2) Discharge electrodes Discharge electrodes provide long-term, solid execution for applications that include substantial dust fixation conditions. It is Made with conduit and also spike for outstanding corona generation with elective ss discharge points for long life. The conduit can be square so as to get more pointed tips for corona discharge long lasting compared to weighted insert electrodes 3) Ceramic insulators Substantial alumina information ceramic insulators for substantial compressive toughness to take the strain. Exclusive style to prevent one on one contact with high temperature and for that reason definitely not at risk of split as a result of moisture build-up or condensation. 4) Rapping system Motor-driven tumbler retracted rapping system to avoid complexity of magnetizing. Very easy to maintain as compared to emigi system. �Power away from rapping� is usually included so that particles meal collapses with lowest resistance. 5) Tr set and also controller Has rapping control included with very same controller hence conserving in more charge not like EMIGI system. Electric power system readily available for optimization. It can be added to substantial impedance to give short enterprise safeguard actually regarding controller inability. Spark sensitivity is modified to optimize functionality. VARIOUS COMPONENTS OF ESP THE TASK Ionization - Charging of particles Relocation - Transporting the charged particles to the gathering surfaces Accumulation - Precipitation of the charged particles onto the gathering surfaces Charge dispersal - Neutralizing the charged particles on the gathering surfaces Molecule dislodging - Removing the particles from the gathering surface to the container.

We manufacture following "Electric components" : Plunger, Hex plunger , V-type plunger for Brass Holder, U-type Brass Plunger for Porcelain Holder, Brass Ring for Backlite Holder, Hex Ceiling Rose, Male-Female Pin Socket, 5Amp. 2-pin/3-pin set (Solid or Hollow), 15 Amp. 2-pin,3-pin Socket, D.P. Switch Contact, Brass Connector Contact, Jack Pin, T.V. Male Female Pin, Brass Reducer, Brass Wood Nipple, Dum-Nut, Meter Screw Parallel Adapter, Brass Adapter, Brass Neutral Link-Screws (As per customer's Specification), 'U' & 'L' type contact, Brass Saddles, Brass Male Female Bushes, 'Brass Cable Glands' etc. Moreover, we can supply any type of component as per customer specifications, in addition to our standard designed products. Copper Battery Connectors Brass Battery Connectors Brass Battery Terminals Copper Battery Terminals BATTERY Copper Battery Connectors Brass Battery Connectors Brass Battery Terminals Copper Battery Terminals TERMINALS COPPER BRASS BATTERY TERMINALS

• Material: Copper
• Color: Brown
• Thickness: 5-10 mm
• Weight: 1-10 Kg
• Resistivity: Corrosion & Chemical resistant
• Durability: Long Life

• Type: Cathode
• Material: Copper
• Application: Electrical Appliances
• Color: Brown
• Thickness: 5-10 mm
• Weight: 1-10 Kg

PURPOSE OF EARTHING Safety for Human life / Building / EquipmentOver voltage protection Voltage stabilization

• Origin: Africa
• Material: Copper
• Shape: Rectangular
• Certification: CE Certified
• Grade: A Grade
• Purity: 99.99%
• Type: Copper Cathodes
• Thickness: 8 mm

Dear Sir,   Please forward me the following details of your requirements :-1) Specifications2) Origin required3) Quantity per month4) Period of Contract5) Packing6) Destination Port7) Target Price8) Payment terms, etc   Thanks & regards,   Manish RohiraEleven InternationalBombay

Shield Alloys, having wide experience with Low Heat Input Electrodes, introduces an outstanding variety of SUPER-LOW HEAT INPUT TUBULAR HARDFACING STICK ELECTRODES having rich Chromium Carbides & Complex Carbides to provide extended service life to components under Abrasion, Erosion, and Impact at ambient and elevated temperatures. These specially formulated metal-alloy powder electrodes are suitable for extremely high deposition rates (Up to 4Kgs/ hr weld metal) and minimum penetration.Such Tubular Electrodes can simply be used on-site using any Transformer or Generator with an output of 150 amps (even less with 6.3mm electrode) on thin section without any distortion. High weld metal recovery and very low slag content enable multi-layer welding without any deslagging in between runs. This means faster deposition, less wastage and very high alloy contents unobtainable with conventional Solid-Core electrode design. The SA Tubular Hardfacing Stick Electrodes have: Very low operating current Super-Low Heat Input High deposition-rate High yield No deslagging No Baking No special Storage No wastage

• Weight: 100kg, 109kg, 140kg
• Rated Maximum Voltage: 15.5kv, 27kv, 38kv

Autoreclosers can be installed in branch feeder lines in a power distribution system or in a Ring Feeder arrangement for a simple Distribution Automation system. It has been observed that about 70% of faults in a power distribution system are Transient Faults typically less than 100 milli-seconds. With an Autorecloser capable of providing up to 4 reclosing operations each operation user configurable the Autorecloser can monitor the state of the fault on every close. If the fault has been transient then supply is restored. In the case of a permanent fault the Recloser will lockout and isolate the fault. This increases reliability of supply. For the Ring Feeder arrangement they can be set to isolate the faulty section and restore supply to the maximum number of users.

Special Features : Available as per customer's design and specifications. Material: Brass Sheet Half Hard as per IS 410 or 63/37 Half Hard Brass Sheet. Threads : ISO Metric (MM Threads) BA Threads BSW Threads (Inches) UNC, UNF Threads Any threads as per custom design Finish And Coating : Natural, Nickle Plated, Tin Plated or any coating as per customer specification. . 

The Field Coils of our company are marked by the quality. The Automotive Field Coils are manufactured using the latest technology so as to ensure high level performance. These Field Coils are long lasting since the superior quality raw materials are used in their manufacturing. We stand in the frontline among the reliable Automotive Ignition Coils Manufacturers based in India. We are among the leading Exporters of Automotive Field Coils.

We are well known as Welding Electrodes Supplier from Maharashtra, India. Our Welding Electrodes are available in different specifications for uses in various industrial segments. Buyers from all over the country can purchase Welding Electrodes in bulk from us. We are a trusted name offering Welding Electrodes that are approved by KR, Abs, LR and other authorized bodies. The Welding Electrodes can be purchased in bulk from us.Applications S-7018G can be used for highly efficient – welding of 400Mpa (73, 000Ibs/in3) class high tensile steel, such as bridges, buildings, rolling stock and machines. Characteristics on UsageS-7018.G is an iron powder low hydrogen type electrode of high efficiency used for welding 490MPa (73, 000Ibs/in3) class high tensile steel. Notes on Usage Dry the electrodes at 300 – 350oC (572`882oF) Keep the arc as short as possible Use wind screen against strong wind. Approval : KR, Abs, LR, BV, Dnv, Gl, Nk, Naks 1 Packing Packet 5 kg (11Ibs) Carton 5 Kg (11 Ibs) x 4 : 20kg (44Ibs) S – 7018. G is an Iron powder low hydrogen type electrode of high efficiency used for welding 490MPa class high tensile steel. Its usability is good with direct current applications as well as altermating current applications and easy to weld in all position. Details Dry the electrodes at 300 oC – 350 oC for 60 minutes before use. Store the electrodes at 100 ~ 150 C after drying for keeping them away from moisture. Keep the arc as short as possible, and avoid large width weaving. Adopt back step method or strike the arc on a small steel plate prepar – ed for this particular purpose to prevent blowholes at the arc starting. Use the wind screen against strong wind.

• Grade: Pure Copper
• Dimensions: 914mmX914mmX12mm
• Place of Origin: South Africa
• Weight: 125kgs +/- 1%
• Copper cathode: Purity 99.99% Min
• Model Number: Copper Cathodes High Grade 99.99%
• Packaging Details: Good Export worthy packaging and as per buyer requirement
• Port: Mumbai

We are offering our clients with all types of ARC Welding Electrodes such as Mild and Structural Steel, Stainless Steel, Cast Iron, Maintaince electrodes. These Welding electrodes are tested for quality from the manufacturers end Laboratory for which we provide Test Certificates to our clients when they are supplied to ensure that they get the best quality product. We also Provide to our clients Excise Cenvatable invoice.

We manufacture battery terminals as per custom specifications.

• Length: 350 mm, 450 mm
• Brand Name: ESAB
• Size: 1 mm, 2.5 mm, 3.15 mm, 5 mm

These are the components of Precipitators(ESP) used in air pollution control industries to extract the dust and smoke from the air or gas. These electrodes remove the dust elements by using electrostatic force. This process easily extracts 99.9% of the dust from the air.

brass electrical accessories, Brass Cable Glands, Electrical Accessories

Autoreclosers can be installed in branch feeder lines in a power distribution system or in a Ring Feeder arrangement for a simple Distribution Automation system. It has been observed that about 70% of faults in a power distribution system are Transient Faults typically less than 100 milli-seconds. With an Autorecloser capable of providing up to 4 reclosing operations each operation user configurable the Autorecloser can monitor the state of the fault on every close. If the fault has been transient then supply is restored. In the case of a permanent fault the Recloser will lockout and isolate the fault. This increases reliability of supply. For the Ring Feeder arrangement they can be set to isolate the faulty section and restore supply to the maximum number of users.

Electrical Equipments, Ac Drives, DC Motor Drives, Industrial Components