Electrical Components Dealers in Shapur Baug, Mumbai

• Length: 350-450 mm
• Material: Mild Steel
• Weight of Box: 500g to 1kg
• Elongation: 18 % (Min.)
• Diameter: 5.0 mm
• Tensile Strength: 63 kgf/mm2 (Min.)

As a promising name, we bring forth high quality product range that is designed and developed using the best in class raw material and modern work methodologies. Besides, we make sure that the basic material is sourced from the trusted places. Not only we present excellent products, but we are also flexible enough to make superfast deliveries and within the promised time. How does a lightning arrestor work? Lightning, is a form of visible discharge of electricity between rain clouds or between a rain cloud and the earth. The electric discharge is seen in the form of a brilliant arc, sometimes several kilometres long, stretching between the discharge points. How thunderclouds become charged is not fully understood, but most thunderclouds are negatively charged at the base and positively charged at the top. However formed, the negative charge at the base of the cloud induces a positive charge on the earth beneath it, which acts as the second plate of a huge capacitor. When the electrical potential between two clouds or between a cloud and the earth reaches a sufficiently high value (about 10,000 V per cm or about 25,000 V per in), the air becomes ionized along a narrow path and a lightning flash results. Many meteorologists believe that this is how a negative charge is carried to the ground and the total negative charge of the surface of the Earth is maintained. The possibility of discharge is high on tall trees and buildings rather than to ground. Buildings are protected from lightning by metallic lightning rods extending to the ground from a point above the highest part of the roof. The conductor has a pointed edge on one side and the other side is connected to a long thick copper strip which runs down the building. The lower end of the strip is properly earthed. When lightning strikes it hits the rod and current flows down through the copper strip. These rods form a low-resistance path for the lightning discharge and prevent it from travelling through the structure itself. The lightning arrestor protects the structure from damage by intercepting flashes of lightning and transmitting their current to the ground. Since lightning strikes tends to strike the highest object in the vicinity, the rod is placed at the apex of a tall structure. It is connected to the ground by low-resistance cables. In the case of a building, the soil is used as the ground, and on a ship, water is used. A lightning rod provides a cone of protection, which has a ground radius approximately, equal to its height above the ground. How do Lightning Protection Systems Work? Lightning protection systems control electrical discharges by directing them through a low-resistance path to the ground, avoiding passage through parts of a structure and reducing risk of fire or other damage. Air terminals (rods – the sketch here is of a rod tip) are fastened to the building to intercept electric discharges which might otherwise strike a building component itself, such as a chimney or metal roof. Electrical discharges striking the air terminal are directed through heavy duty metal conductors to a grounding system (rods driven into the soil) and thence into the earth. The lightning protection system was first invented by Ben Franklin in 1752. Copper lightning arrestors ball : Copper lightning arrestors ball comes in various sizes from 45 mm to 100mm. Copper point, Copper socket, Copper flance are attached to the pipe to make the complete lightning arrestors. Various sizes - 45 mm to 100mm.   Export quality lightning arrestors : This type of lightning arrestors is made of high quality copper combinations which matches the international standard use in foreign countries. It has high durablity and stong ressistance level .

• Material: Stainless Steel
• Thickness: 15-20mm
• Length: 1-20 Feet
• Surface Treatment: Polished
• Application: Automobile Industry, Industrial

Magnetic coils are usually used in the automobile industry and have varied applications in other industries as well. They serve a critical purpose and needs to be of high quality. You can find the best quality stainless steel magnetic coil at Nickel Impex LLP and can save a lot with quality products. We are in this business for a long time and have made a name in the market. We are known to be a reputed stainless steel magnetic coil supplier that has served a huge number of clients and businesses over a period. We are just a call away if you need to know about anything and you can place an order with us online without any hassle.

We are the leading manufacturers, exporters, and suppliers of Earthing Clamps from Mumbai, Maharashtra. We guarantee high quality, and durable Earthing Clamps that are especially designed to connect the pipes to the conductor for earthing. We offer a range of Earthing Clamps to our Indian and global customers that are available in three standard band lengths to suit pipe diameters of 12mm-32mm, 32mm-50mm, and 50mm-75mm. Our team of skilled people design and manufacture the Earthing Clamps under strict and approved quality control procedures as per BS 951 standards.  While the Earthing Clamps are available in two colors i.e. red for non-corrosive dry atmosphere, and blue for corrosive humid conditions.   Special Features:- Designed & Manufactured under strict and approved quality control procedures, as per BS 951 standards. Available in 2 Colours.:Red for Non-corrosive dry atmosphere and Blue for corrosive humid conditions. Available in 3 standard Band Lengths to suitPipe diameters of 12mm – 32mm, 32mm-50mm and 50mm-75mm Available in 2 Terminal Sizes:A-D for conductors of 2.5 mm2 – 10 mm2 and A-E for conductors of 2.5 mm2 - 16 mm2 (A-E being identified by its Blue safety label)

We are offering welding electrode. We would like to introduce ourselves as a one of the leading importer & stockiest of all kind of stainless steel ,nickel base alloy, titanium alloys, in filler wires, flux cored wire, welding electrodes etc in india. We can offer you all the material ex-stock mumbai at most competitive rates along with canvet benefit & batch test certificate of many brands such as nihonweld,tigweld arc,oxford alloys, arcos usa, gee ltd, esab, d&h secheron, ador etc cobalt base alloys :- welding electrodes : grade 1, grade 6, grade 12, grade 21 filler wire : grade 1, grade 6, grade 12, grade 21 stainless steel :- welding electrodes : e308, e308l-15, e308l-16, e-308l-17, e316, e316l-15, ,e316l-15, e309, e309l, e309mol, e385, e310, e347, e2209, e2553 filler wires : er308l, er308h, er316l, er316h, er309l, er309lmo, er310, er318, er310lmo, er904l, er 317l, er385 flux cord wire : e308lt-i, e316lt-i, e309lt-i, e347lt-i, e309lmot-1 nickel base alloys :- welding electrodes : nickel 141, monel 190, monel 187, inconel 62, inconel 182, inconel 117, inconel 112, incoweld a, hastalloy c-276, etc. filler wire : nickel 61, inconel 52, inconel 82, inconel 92, monel 60, monel 67, inconel 625, inconel 617, inconel 718, hastalloy c-276, titanium base alloys :- filler wires : grade 1, grade 2, grade 5, grade 12 aluminium wire :- : er4043, er5356 etc

Ours is a reckoned name in this arena and capable to deliver high quality products to our worthy patrons. One can rely on us for the quality as our offerings are prepared using the best in class raw material. With our inventory management system, we are capable to undertake urgent and massive requirements of the buyers at a time. Features: Resistant against abrasion Dimensional accuracy sturdy structure

• Material: Copper
• Thickness: 0.04mm - 5mm
• Place of Origin: INDIAN

We are a customer-focused firm and bring a solution that makes us capable to make safe and secure payments. Also, our payment procedure is verified and approved by the authority. Only high quality raw materials have been used for the production of our products as we comply with all quality standards. Features : Safe from electricity Completely safe Crack proof

• Material: Stainless Steel
• Thickness: 0-3mm
• Length: 0-250mm
• Application: Welding Purpose
• Weight: 0-50gm
• Finishing: Polished
• Feature: High Clarity, Proper Working, Smooth Texture

The company stands tall among the successful Suppliers of Welding Electrodes from Mumbai, Maharashtra. The Welding Electrodes offered by us is manufactured in compliance with set industrial norms. We maintain a large stock of the Welding Electrodes in our state-of-the-art warehouse, to meet the bulk and urgent requirements of the buyers. We are capable in delivering any order of Welding Electrodes to the buyers all over the country.

We have hired dedicated professionals for checking the quality of the products against various parameters. Located in Mumbai(India), we have marked our presence as a distinguish Supplier since our products are qualitative and timely delivered.

• Brand Name: Maxell Steel & Alloys
• Material: Stainless Steel
• Type: Welding Electrodes
• Place of Origin: Mumbai  
• Unit: Trader
• Packaging: Bulk

We are offering stainless steel welding electrodes. E307-16 2.0mm ∞ 5.0mm ac dc(+) 0.06 0.68 5.66 19.87 9.73 0.98 - 640 (93) 45 welding dissimilar steel such as a welding austenitic manganese steel to carbon steel forgings or castings. E308h-16 ac dc(+) 0.05 0.80 1.00 20.00 10.00 - - 600 (87) 40 for welding of low carbon steels of aisi 304 type where maximum resistance to intergranular corrosion is required. E308e308l-16 ac dc(+) 0.02 0.46 1.88 19.97 9.69 - - 590 (86) 45 for welding of 18% cr - 8% ni steel such as aisi type 301, 302, 304 305, and 308. E309e309l-16 ac dc(+) 0.03 0.69 0.97 24.02 13.21 - - 588 (81) 44 for welding low carbon 22% cr -12% ni steel, carbon steel or low alloy steel to stainless steel & stainless clad steel. E309cb ac dc(+) 0.08 0.56 1.65 23.10 12.9 - cb 0.79 electrode is designed for special applications requiring columbium with 22% chromium and 12% nickel e309 mol-16 ac dc(+) 0.03 0.65 1.10 23.71 12.84 2.31 - 606 (88) 41 for welding of type 316 clad steel or dissimilar steel.corrosion resistant lining of carbon steels or low alloy steel.

• Type: Zinc Anodes
• Material: Zinc
• Certification: ISO 9001:2008 Certified
• Color: Metallic, Shiny-silver, Silver
• Finishing: Non Polished, Polished
• Packaging Type: Plastic Sack
• Tensile Strength: 0-5 Mpa, 5-10 Mpa
• Application: Cathodic Protection, Corrosion Prevention
• Condition: New

We are the main supplier of this product.

Lead Anode is used as an electrode during Zinc Refining / Electrolysis. The company has brought commercial production of Lead Anode made by Lead-Silver Alloy or as per desired specification made the customers. Lead Anode, One of the major uses is in zinc smelters to do protection against corrosion as it is also anodic in behavior to noble metals.   We have developed very efficient shapes and sizes with years of experience. Great for custom chrome plating Solid - square or round, we will manufacture it for you All hooks are copper since it is the best conductor Send us your drawings and we will produce to your specifications Any size any shape All hooks are Plasticol coated for protection from the solutions and handling We also manufacture Lead Grids for certain applications

Buyers can rely on us for the best in line products as we prepare them using the finest grade raw material and modern techniques. Also, the basic material is sourced from the reliable places. Buyers are required to place orders; timely deliveries of consignments are our primary concern.

• Material: Stainless Steel
• Thickness: 0-3mm, 0-5mm, 7-10mm
• Length: 0-250mm, 250-500mm
• Application: Welding Purpose
• Weight: 0-50gm, 100-200gm, 50-100gm
• Finishing: Polished
• Feature: High Clarity, Proper Working, Smooth Texture, Temperature Maintained, Uniform Finish

We offer Stainless Steel Welding Electrodes in different specifications. Stainless Steel Welding Electrodes have good corrosion resistance and oxidation resistance, which make them durable and highly efficient. These Stainless Steel Welding Electrodes are widely used in chemical, fertilizer, oil, and medical machinery manufacturing. Besides, we provide Stainless Steel Welding Electrodes at very competitive price. Highlights : Corrosion resistance Impervious to air and water Non-magnetic Durable

With our domain expertise, we are capable of supplying Nickel Anodes in the Indian market. The Nickel anodes, we offer, are suitable for diverse industrial requirements owing to their excellent properties. The clients can avail the Nickel anodes from us in varied specifications to cater to the diverse requirements. We further offer the Nickel Anodes at affordable price.

• Country of Origin: India
• Type: Welding Electrodes
• Length: 350 mm
• Material: Stainless Steel
• Packaging Type: Box, Packet

product details: size 1 mm, 2.5 mm, 3.15 mm, 5 mm length 150 mm with the aid of our expertise, we prashaant steel are able to offer a superlative quality of tungsten electrode. It is widely used as high thermal and high electrical conductivity in various welding process. The offered product is manufactured using the standard quality raw material under the strict surveillance of vendors' professionals as per the set industry norms. Our offered product is rigorously examined under the keen eye of our skilled quality controllers to ensure excellent quality. Further, it can be availed at an affordable price with no constraint. features: tough and tensile rust proof high resistance to contamination specifications: electrode type current applications welding properties wl15 - gold plus(1, 5 % lanthanum oxide, gold) ac/dc non-alloyed and low alloy steels stainless steels aluminum alloys magnesium alloys titanium alloys nickel alloys copper alloys very good ignition and re ignition properties high service life very good arc stability suitable as a substitute for wt20 wl20(2,0 % lanthanum oxide, blue) ac/dc non-alloyed and low alloy steels stainless steels aluminum alloys magnesium alloys titanium alloys nickel alloys copper alloys very good ignition and reignition properties, in particular at high currents high service life very good arc stability suitable as a substitute for wt20

• Type: Flexible
• Material: Copper
• Certification: CE Certified
• Color: Brown
• Purity: 99%
• Technics: Copper Melting

• Material: Brass, Gun Metal, Aluminium Bronze
• Application: Connecting Rod to Tape Clamp
• Finishing: Natural
• Feature: Durable, Easy To Fit
• Size: 5/8 inches

Corrosion resistance, conductivity and mechanical strength are essentialconsiderations in clamp design to ensure an earthing system remains operative for many years. All Hallmark earth rod clamps have high strength copper alloy bodies and screws e.g. aluminium bronze, phosphor bronze etc. commercial brass is not used. Tightening torque (Bs EN 50164-1:2000) 15Nm.

• Working Temperature: -50 - 40 deg C
• Lamp Luminous Flux(lm): 14000
• Input Voltage: 90-307 V

• Material: Aluminium
• Grade: 7XXX
• Color: Grey
• Finishing: Polished

These brass plugs are precision engineered and appreciated in international market for dimensional accuracy and sturdiness. Further, the length of these brass plugs can also be customized as per the specific requirements of clients.

Manufacturer and Exporter Of a wide range of brass electrical wiring accessories, which includes Rod to Cable Lug Clamp, Rod to Tape Clamp, U Bolt - Rod Clamp, U Bolt - Rod to Cable Clamp and many more. Our earthing accessories are properly designed & installed to safeguard both lives & the equipment. Corrosion resistance, conductivity and mechanical strength are essential considerations in manufacturing our earthling accessories.The Brass Electrical Wiring Accessories has products like: Split Bolt, D Clamp, Earth Tag, Lock Nut, Reducer, etc...and are made from BS 2874 brass and various kinds of plating are used like natural brass, nickel plating, etc.. to give the product a good and look and strength. These Products are available in various sizes as per the requirement.

• Material: Copper
• Shape: Round
• Wall Thickness: 0.25mm - 1.5mm
• Finishing Type: Polished
• Size: 1 - 5 meter (length)
• Usage/Application: Air Conditioner Or Refrigerator
• Cu Content: 99.9%

We manufacture Copper Anodes/Nuggets from genuine copper cathode. They are highly used for decorative, rotogravure and printing circuitry. It is also used in Electrical ground rod and other functional plating applications. We provide Copper Anodes that are in different size and shapes having different levels of phosphorous. Our Copper Anodes provides good control and reliable performance. Copper Anodes that we manufacture are by far the best in the market with the finest reliability and dependability.