Electrical Gauges Dealers in Mumbai

Engaged in manufacturing and exporting electric contact gauges that find application in several industries. Highly efficient and durable, these contact gauges are widely used for monitoring , measuring and controlling of the line pressure by switching on & off electrical equipment. Complying to set industrial norms, these gauges make or break an electronic control cycle as per the position of the instrument’s pointer and there is no need for a separate switch on these electric contract gauges.

The adjustable contact arms P & Q can be set from outside individually by a knob at any required set point. The limit value switch is so designed that the instrument pointer can continue its movement beyond the set pointer, after the contact has been made.Electrical Magnetic Contacts are carfuly designed since they are subject to hard wear during use according to switching conditions because of the mechanical stress, the influence of current heat and the electric arc.

we are offering Electrical Contact type pressure gaiuges.

• Scale Range: 0.. Vacuum to 700 Kg/Cm² and above on request
• Thread Connection: 1/4", 3/8", 1/2", BSP and NPT, M-20
• Nominal Size (mm): 100, 150.
• Accuracy in FSD: 1%
• Mounting of Gauge: Bottom, Surface, Back, Panel with 3 Holes, Panel with Bracket
• Case and Bezel: SS 304
• Pressure Elements: Bourdon Tube
• Diaphragm: Nil
• Wetted Parts: Brass, SS 316 and other material on request
• Application: Pneumatic Control System, Air Conditioning Pumps, Chemical and Petrochemical, Water Treatment, etc.
• Electric Contact: 1 NO, 1NC, 1NO+1NC, 1NC+1NO (230 V AC/110 DC Max, Current 1 Amp) Liquid filled on request

• Dial Size: 4",6"
• Scale Range: 0 - 100 lb/sq.in to 0 - 20000 lb/sq.in
• Connection: 3/8" BSP OR NPT 1/2 " BSP OR NPT
• Application: Intended to make or break an electric control circuit relative to the position of the instruments pointer.
• Accuracy / Class as per Indian Standards: +/- 1 % FSD
• Mounting: Direct Bottom Panel Mounting with Centre Back or Side Back
• Case: Drawn Steel
• Pressure element: Bourdon tube
• Wetted parts: Brass soldered
• Movement: Bronze bushed, Brass movement with extra wide gear face on sector
• Dial: Aluminum with White background and black markings& numbering
• Pointer: Adjustable
• Window: Molded Acrylic
• Optional: Electrical Contacts as mentioned above Full 316 stainless steel system

• Dial Sizes: 4" (100mm) and 6" (150mm)

Electric Contact Pressure Gauges are suggested where application is for control of pressure & for Audible or visible alarms. These gauges give electrical output which can be used to turn a motor onoff & similar applications. These gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output.

Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. These gauges give electrical output which can be used to turn a motor onoff & similar applications. These gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output.

Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. These gauges give electrical output which can be used to turn a motor on/off & similar applications. These gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output.   Specifications   4 Available in 4" (100mm) and 6" (150mm) Dial Sizes 4 Contacts: 1NO+1NC, 1NO, 1NC, 2NO, 2NC, 2NO+2NC 4 Contact Rating:  230V, 100mA 4 SS316 Bourdon and Socket, SS304 Movement 4 Stainless Steel SS304 Case and Ring IP65 4 3/8”, ½” bsp or npt connection 4 Mounting: Bottom Direct, Bottom Surface, Back Direct, Back Panel, Back Clamp Mounting

can be used for different monitoring, measurement and control of line pressure by switching “on or off” electrical equipment. The SE model contact pressure with electrical alarm contacts are suitable for controlling or regulating process sequences. The contact opens and closes electrical circuits in relation to the position of the pointer on the pressure gauge. Our contact pressure gauges with bourdon tube system are used at process pressures of approximately 1kgcm2 and upwards. The materials used make the gauges suitable for chemically aggressive gases or liquids,although these may not be too viscous or be susceptible to crystallization. The inexpensive tried and tested bourdon tube system coupled with modern modular principle provides a very reliable yet inexpensive contact pressure gauge. Electrical alarm contact are used as magnetic snap-action contacts,especially in harsh industrial conditions. The high contact pressure and the choice of different electrical contact materials enable high currents to be switched reliably. If the electrical switching spaciest of the alarm contacts are exceeded or not reached (See DE 12 31), a relay is to be used to provide an appropriated current rating (DE 12 30).

MASS Make SingleDouble Snap action Magnetic Eletrical Contact Gauges are available in 100mm & 150mm dial size. These gauges serve for the measurment and control of pressure by switching 'on and off electrical equipments. Thus eliminates the need of separate switches for equipments such as pumps, motors, turbines, blowers for audiovisual alarms for signalling irregularities. These Contacts may be used under almost all operating conditions, they are largely immune to vibration. The contact pin carrier of the indicator is equipped with an adiustable magnet which attracts the contact arm just prior to reaching the indicator. This prevents arcing and burning of contact pins.

Our Electrical Contact Pressure Gauges are reckoned for their make and long service life. Product packaging is done using industrial grade materials by us to ensure safe and undamaged delivery of consignments. Further, we provide tailored packaging solutions. The team of quality auditors ensures the product quality on several counts prior to final dispatch.

electrical pressure gauges, Control Valve, Hydraulic Filters

• Dial Size: 4" (100mm) and 6" (150mm) Dial Sizes
• Material: Stainless Steel SS304 Case and Ring IP654 3/8”, ½”
• Brand Name: Adarsh
• Electric Contacts: 1NO+1NC, 1NO, 1NC, 2NO, 2NC, 2NO+2NC
• Contact Ratings: 230V, 100mA
• Mounting: Bottom Direct, Bottom Surface, Back Direct, Back Panel, Back Clamp Mounting
• Place Of Origin: Mumbai
• Delivery Time: 1 week (Min.)
• Payments Mode: T/T & other

Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. The contact pressure gauges give electrical output which can be used to turn a motor onoff & similar applications. Contact gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output.

electric contact pressure gauges, bimetallic temperature gauges

electric contact pressure gauge, Mechanical Carbon Bushing

Electrical Contact Pressure Gauges, steam gauges, Acrylic Manometer