Electrodes Dealers in Borivali, Mumbai

• GALVANISED STEEL GROUND ROD: GALVANIZED STEEL EARTH RODS

We are offering galvanized steel ground rod. galvanised steel earth rods are made up of high strength low carbon steel and hot dip galvanized. This design of the rod is actually cost effective option for earthing. steel ground rod a steel ground rod is an array of electrodes, known as steel ground rods which is installed in the ground to provide a low resistance electrical path to ground or earth. A ground bed is a component in an earthing system. in electrical engineering, ground or earth is the reference point in an electrical circuit from which other voltages are measured, or is a common return path for electric current, or a direct physical connection to the earth. electrical circuits may be connected to ground (earth) for several reasons. In mains powered equipment, exposed metal parts are connected to ground to prevent contact with a dangerous voltage if electrical insulation fails. Connections to ground limit the build-up of static electricity when handling flammable products or electrostatic-sensitive devices. In some telegraph and power transmission circuits, the earth itself can be used as one conductor of the circuit, saving the cost of installing a separate return conductor. for measurement purposes, the earth serves as a constant potential reference against which other potentials can be measured. An electrical ground system should have an appropriate current-carrying capability to serve as an adequate zero-voltage reference level. In electronic circuit theory, a "ground" is usually idealized as an infinite source or sink for charge, which can absorb an unlimited amount of current without changing its potential. Where a real ground connection has a significant resistance, the approximation of zero potential is no longer valid. Stray voltages or earth potential rise effects will occur, which may create noise in signals or if large enough will produce an electric shock hazard. the use of the term ground (or earth) is so common in electrical and electronics applications that circuits in portable electronic devices such as cell phones and media players as well as circuits in vehicles such as ships, aircraft, and spacecraft may be spoken of as having a "ground" connection without any actual connection to the earth. This is usually a large conductor attached to one side of the power supply (such as the "ground plane" on a printed circuit board) which serves as the common return path for current from many different components in the circuit. grounding systems. for building electrical grounding systems, an array of steel ground rods and copper bonding cable would serve as the ground bed. Steel ground rods can be made from steel with a copper clad surface typically 2 metre long and 20 mm diameter. These are driven vertically into the ground and bonded together with bare copper wire.

• Shape: Rectangle
• Purity: 99%
• Country of Origin: Made in India
• Electrode Material: Copper

Collecting Electrodes are utilized for electrostatic charging of particulates as well as collection of charged material on collection surfaces of gas stream. These Dust Collecting Electrodes have acquired applications in industrial processes wherein gas stream are expected to be smooth. Industrial Collecting Electrodes ensures even distribution of gas with minimal pressure loss and low material expenditure. We provide availability of Collecting Electrodes at the most nominal prices. We are counted as one of the famed Industrial Collecting Electrodes Suppliers from India.

In big industrial processes where gas streams have to be smooth, collecting electrodes are used for electrostatic charging of particles and subsequent collection of the charged material onto collection surfaces in the gas stream. Collecting Electrodes form passages center of which discharge electrodes are suspended. Collecting Electrodes are shaped to provide quiescent zones to prevent the collected dust from being entrained by the gas stream. Collecting Electrode guarantees a very even gas distribution wth a low pressure loss and minimum expenditure on material. The air is also cleaned due to collection of solid articles or liquid droplets from gas streams.

• Place of Origin: Maharashtra, India
• Port: Nhava Sheva
• Packaging Details: Gani Bag Packing, Wooden Packing, Reel Packing
• Model Number: SCER

• Length: Standard and Customized
• Condition: New
• Brand Name: SWI
• Size: Standard and Customized
• Pieces Per Box: 10 pc
• Thoriated tungsten (AWS classification EWTh-2): 97.30 percent tungsten
• Thorium: 1.70 to 2.20 percent

• Brand Name: AIROD

Manufacturer and exporter of copper bonded rod, copper bonded electrode, copper bonded rod welded with clamp, solid copper rod, purer copper rod and its accessories.

Every time an arc is struck the electrode receives a high current surge that brings it from a cold state to an extremely hot state very quickly. The ionized plasma gas flowing past the electrode is full of charged particles . These particles pull away atoms from the hot surface of the electrode which wears away the emitting element and creates a pit in the surface. The number of starts and stops is more important than actual cutting time in establishing the life of the electrode. It is important to keep an eye on your consumables to know how to evaluate when they need changing. To tell if an electrode is spent, check the pit in the electrode element (the element is the silver-colored insert held in the copper: hafnium for air and O2, tungsten for N2 or Ar-H2). Generally, the pit should not exceed 2.5mm for air and O2 and 3.2mm for N2 or Ar-H2. Electrodes should be changed in time to prevent possibly serious damage to the torch if the electrode bursts inside.

We are reckoned among the trusted Suppliers of Ignition Electrodes. The Electrodes offered by us are manufactured in compliance with set industrial norms.  To ensure that only defect-free Electrodes reach the buyers, we source these from known vendors in the market.  Bulk orders of these are processed by us as per the specific requirements of the buyers.  One can obtain these at reasonable rates from us.

ph electrode, Mettler Analytical Balances, Visible Spectrophotometer

We are offering all types of electrodes are available.

Pure Copper Earthing Rods that we export and supply are extensively in demand amongst buyers. Our rods are made using high conductivity hard drawn copper to BS 2874 - C101. These are ideal for such applications where soil conditions are very corrosive, such as soil with high salt and moisture content. These rods are also available with tin plating in order to reduce the risk of oxidation and thus increase their functional life. Threads on the rods are formed by roll threading process, which provides an extra strength to the threads, eliminating the risk of chipping of threads while driving the rod in the ground.

We, along with our team members make all the payment procedures completely transparent that makes us a trustworthy name in the industry. We are among the trusted names, involved in offering a world-class lot of WELDING ELECTRODE in the national market. These welding electrodes are made of 100% stainless steel with a protective coating for rust resistance. 

• Type: Electrodes
• Material: Tungsten Alloy
• Thickness: 0-3mm
• Condition: New
• Finishing: Polished

For T-25e, T-39, T-55, T-66, T-71 series and T-72 series splicers Use ER-10 electrodes