Electromechanical Relays Dealers in Mumbai

Low cost Universal three phase motor protection Easy InstallationMinimizes inventory Monitors and protects against phase loss, reversal and imbalance Response time 80 milliseconds maximum Bright LED for on and fault indications Operating Temperature -40°F to 167°F (-40°C to 75°C)1/4” male spade terminal connections Delay on make timer Adjustable 10 seconds to 5 minutesTolerance +/- 20%

We are a supreme manufacturer, supplier and exporter of dc motor protector (sn-25). The sn-25 series is a high current motor protector which delivers the benefit of locked rotor and overload protection in a robust integrated package. the sn-25 series has been designed to offer protection for a wide range of 12 volt to 48 volt applications in a minimum package size. The sn-25 series is suitable for both intermittent and continuous rated motors. The sn-25 is also designed for manual switching operations. The sn-25 is physically small and has unique 'snap action' bimetal disc, ensuring a positive make and break switching action for enhanced contact life. Has unique 'snap action' bimetal disc, ensuring a positive make and break switching action for enhanced contact life. features tin plated steel base and tab available in covered and uncovered versions designed to trip time or temperature specifications multiple bimetallic resistivities available applications over current and temperature protection in dc motors refrigerator compressors dc blowers engine cooling fan motors pump motor window lift motors front and rear wiper motors sun roof motors adjuster motors antenna lift motors door lock actuators wiper motors sliding door motors rating nominal operating voltage : 12-48 volts dc typical voltage drop at operating current : 200 mv max cut-off temperature range : 60oc to 166oc operating trip current range : 10-125 amps selection code sn-25nc( graph the current vs trip time graph shows that whenever there is a locked rotor condition and the current exceeds 2.5 times the rated current the circuit is opened by sn-25 within 4-7sec without harming the motor.

Auxiliary relays are used for machine safety. Auxiliary relay assists a protective relay in switch-gear for a number of operations. Protective Relay performs task of measurement and under required conditions, is closes its contacts. Protective relay is relieved of all duties such as tripping, Time lag, breaking of trip circuit current, giving alarm, showing flags,etc. This duties are performed by Auxiliary Relays.Each of these duties are performed by an auxiliary relay.Seal-in Relay, Alarm Relay,Time lag Relay are some of the auxiliary relays. Contacts of Protective relay are delicate. Seal-in Relay is an auxiliary relay that protects the contacts of Protective relay. Alarm Relay is an auxiliary relay that gives trip alarm(Indication) both in audible and visual form. Time lag relays are auxiliary relay that operate after a preset time lag. They are used in control and alarm circuits to allow time for the required sequence of operation to take place. This are various applications of auxiliary relay. These parts are made of 48% Ni:Fe.PML provides these parts with high magnetic properties and critical dimensions maintained for proper working of the auxiliary relay.

• Usage: industrial
• Mounting Type: Din Rail
• Number of Poles: 2 Pole
• Phase: 3 phase

• Brand Name: Beluk,
• Epcos: Entes
• Neptune: Nippen

• Brand Name: Hongfa
• Material: Plastic
• Color: Black
• Voltage: 24VDC
• Packaging Type: Carton Box
• Model No.: HF115F

automatic voltage regulating relay is of two types type-n-101 size: 135 mm(h) 330 mm(w) 250mm(d) type-n-101 96 mm(h) 192mm(w) 200mm(d)   solid statecontrol using latest c-mos, integrated ckts,     compact panel mounting type design     digital read out for pt sec, pt set & dead band settings,     led indication for supply,raise, lower & under voltage,     condition, continuously variable time delay setting,     automatic resetting after voltagecorrection,     single pulse operation of control relays     selfrrestfacility     under voltagealarm contact with internal blocking.:     .

• Frequency: 47 - 63Hz
• AC Input Range: 180V TO 270VAC
• Rhodium Plating: UP TO 3 Ltr. to 35 Ltr.
• Gold Plating Rectifier ranging from: 300W to 13KW

GS-SH-212T GOODSKY Relay: electromagnetic; DPDT; Ucoil: 12VDC; 1A/120VAC; 2A/24VDC; 2A GS-SH-212T GOODSKY Relay: electromagnetic; DPDT; Ucoil: 12VDC; 1A/120VAC; 2A/24VDC; 2A

• Current Type: AC
• Mounting Type: PCB Mount
• Usage: Factories, Power Plants
• Packaging Type: Carton Box

We have various types of relays like electromechanical, power  industrial , telecommunications, automobile relays ,we also have Keltron and samwha capacitors. 

• Material: Aluminium, Plastic, Polyester Film, Raw Aluminium
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Voltage: 110V, 220V, 380V, 440V, 580V
• Condition: New, Old
• Frequency: 50Hz, 60Hz
• Warranty: 1Year, 2Years
• Current Type: AC, DC
• Type: Power Relays
• Weight: 0-100gm, 1-2kg, 100-200gm, 200-400gm, 400-800gm
• Operating Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Feature: Auto Controller, Heat Resistance, High Performance, Stable Performance
• Phase type: Double Phase, Single Phase, Triple Phase

• Brand Name: CONTEC ELECTRONICS

We are offering relay.a relay is an electrically operated switch. Many relays use an electromagnet to operate a switching mechanism mechanically, but other operating principles are also used. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in long distance telegraph circuits, repeating the signal coming in from one circuit and re-transmitting it to another. Relays were used extensively in telephone exchanges and early computers to perform logical operations. A type of relay that can handle the high power required to directly control an electric motor is called a contactor. Solid-state relays control power circuits with no moving, instead using a semiconductor device to perform switching. Relays with calibrated operating characteristics and sometimes multiple operating coils are used to protect electrical circuits from overload or faults; in modern electric power systems these functions are performed by digital instruments still called "protective relays"

• Cut-off temperature range: 60ºC to 166ºC
•  :  
•  :  
• Nominal Operating Voltage: 12-48 Volts DC
• Typical voltage drop at operating current: 200 mV max
• Operating Trip Current Range: 10-125 Amps

  The SN-25 Series is a high current DC motor protector which delivers the benefit of locked rotor and overload protection in a robust integrated package. A broad range of design and mounting options enable this device to be custom engineered to meet your needs. Over current and temperature protection in DC Motors. - Refrigerator Compressors - DC blowers - Engine Cooling fan motors - Pump Motor Features - Tin plated steel base and tab.- Available in covered and uncovered versions- Designed to trip time or temperature specifications.- Multiple bimetallic resistivities available. The SN-25 Series has been designed to offer protection for a wide range of 12 volt to 48 volt applications in a minimum package size. The SN-25 Series is suitable for both intermittent and continuous rated motors. The SN-25 is also designed for manual switching operations. The SN-25 is physically small and has unique 'snap action' bimetal disc, ensuring a positive make and break switching action for enhanced contact life.  

• Material: Aluminium, Plastic
• Voltage: 11000V, 110V, 15000V, 220V, 25000V, 380V, 440V, 580V
• Frequency: 50Hz, 60Hz
• Power Consumption: 1-3kw, 12-15kw, 15-18kw, 18-21kw, 21-25kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1Year, 2Years
• Current Type: AC, DC
• Phase: Double Phase, Single Phase, Triple Phase
• Certification: CE Certified, ISI Certified
• Condition: New, Used
• Specialities: Accuracy, Auto Controller, Durable, Heat Resistance, High Performance, Shocked Proof, Stable Performance

MPR300 is a Microprocessor based LT Motor protection relay. The relay has got inbuilt CTs for motor sizes up to 50KW (i.e 88 A current) Features :- LED’s for trip indication. Inbuilt CTs available 4 selectable trip time curves for thermal overload Test facility through front push button. Manual reset facility through front push button. With / Without fail safe mode

• Voltage: 1 Pole
• Number of Poles: 2 Pole, 4 Pole, 1 Pole
• Mounting Type: PCB
• Brand: Omron, OEN
• Current: 0.5A, 1A
• Colour: Black
• Voltage Type: DC
• Package: Dual In Line,Single In Line - DIP Type Package
• Efficiency: High Speed,Cost Effective
• Application: Modems,Security Systems,EPABX
• I Deal In: New Only
• Contact material: Ru Alloy

• Material: Aluminium
• Certification: CE Certified
• Voltage: 110V, 220V
• Condition: New
• Frequency: 50Hz, 60Hz
• Application: Electromagnetic Flux

We are the main supplier of this product.

• Voltage: 12-24V
• Voltage Type: DC
• Rating: 35-70A
• Temperature Range: -40 to 85deg C

TeSys LR97D - Electronic over current relays 0, Direct mounting beneath TeSys Model d contactors up to LC1D38, width 45 mm. Current threshold adjust...teady state operation). Selection of 3-phase or single-phase operation. External 24 to 230 V AC power supply.

general purpose relay Plug in relays : (MPC & HPC) , General Purpose Relays (MCC), Special Relay (MSR), Power Relay (PCC & HPR), Relay TImer SOckets ( 8 Pins 11 Pins)

The 'CGV 24C' Numerical Protection Relay is a fully digital relay based on microprocessor technology with analogue to digital conversion of the measured values and subsequent numerical processing. It uses specialized digital signal processor (DSP) as the computational hardware, along with associated software.

• Number of Poles: 4 Pole
• Color: Plane
• Frequency: 50-60 Hz
• Usage/Application: Automation,Control Panels,Electrical Panels,etc.
• Brand: Finder
• Model Name/Number: General Purpose Relay 7 to 10A
• Voltage Type: DC
• Coil Voltage: 24 V DC
• Type: Voltage Relays
• Contact Form: 4PDT
• Dielectric Strength Between Open Contacts: 1000
• Mounted: Plug-in Type

• Voltage: 220V
• Packaging Type: Carton Box
• Number of Poles: 2 Pole
• Mounting: Rail Mounting
• Pack Type: Carton Box
• Operating Frequency: 50/60 Hz
• Operating Voltage: 230 VAC

• Certification: CE, RoHS
• Mounting Type: DIN rail mount
• Item Code: 900CPR-1
• Display Configuration: 3 Digits
• No. of Input: 1
• Type of Input: 1Ø-2 wire
• Output Contact: 1X1C/O (SPDT)
• Supply Voltage: 230V AC (Factory set)/110V AC; ±5% of setting +200ms
• Type of Output: RELAY

• Specialities: Easy to install, Light weight, Fine quality
• Country of Origin: Made in India
• Usage: Office Use
• Brand Name: Siddhi Electronics
• Current: 220 V
• Type: Voltage Relays

• Certification: CE
• Model Number: INT
• Brand Name: KRIWAN
• Application: Compressor