Electronic Detectors Dealers in Saki Vihar, Mumbai

• Model Number: EZ-Sense -1 with Indication, EZ-Sense - B Non Indicative
• Resolution: lPPMorl%LEL
• Response Time: 2-3 seconds
• Warranty: One year
• Battery: High Impact Plastic. (ABS)
• Temperature: -10°C to 50°C
• Weight: 200 GM
• Dimension: 119(H) X80(L)X 25(D)
• Gas Detected: LNG, LPG, CH4 Flammable gas, H2
• Leak Strength Indication: 1 - DIGITAL B - Three Level Visual Alarms
• Calibration: PPMorLEL% (To Customers specs)
• Sensor: Solid state semiconductor
• Housing: High Impact ABS Plastic
• Alarm indication: Alarm indication
• Calibration: Not required
• Gooseneck: 6 volt alkaline, Rechargeable batteries 1.5V (AA Alkaline)
• Warm-uptime: About 10 sec
• Battery Operating Time: About 4 hours
• Humidity: 15 to 95% RH

Flame and Gas Detection systems with/without SIL certified controlling & PLC conforming IEC 61508. These systems are also supplied wireless communication using HART/ ISA 100/ GSM wireless. SIL 2 certified Hybrid Sensors SIL 3 certified Controllers Point IR Gas Detectorss Open Path IR Gas Detectors Catalytic Detectors Electrochemical Detectors Metal Oxide Semiconductor Detectors Flame Detectors Photo Acoustic Detectors Ultrasonic Gas Leak Detectors

Advanced Metal Detection in Pharmaceutical Tablets Designed to meet the exacting standards and regulations of the pharmaceutical industry, METTLER TOLEDO Safeline pharmaceutical metal detectors provide the ultimate solution in fully integrated product inspection and rejection systems for tablets, capsules, powders and granules. Our metal detection systems are designed to detect all metal contaminant types, including ferrous, non-ferrous and even the most difficult-to-detect non-magnetic stainless steels.

Flame and Gas Detection systems withwithout SIL certified controlling & PLC conforming IEC 61508.These systems are also supplied wireless communication using HART ISA 100 GSM wireless.Metal Oxide Semiconductor Detectors.

• Technical Specification: UL / Vds / LPCB approved

We are offering beam smoke detector. The fireray⮠50r/100r series of reflective infrared optical beam smoke detectors are comprised of a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below and parallel to the ceiling. Lateral detection may be up to 7.5 metres either side of the beam. Applications the fireray⮠50r/100r series of reflective infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces with high ceilings, particularly if access to �point type� smoke detectors presents practical difficulties. key benefits single compact housing area coverage 50 metre or 100 metre model available 12-24 vdc operation low current consumption robust construction conforms to: bs5839 part 5 and en54 part 12, ul and vds

• Country of Origin: India
• Type: Veterinary Instruments
• Material: Stainless Steel
• Application: Veterinary Use
• Color: Black
• Feature: Best Quality, Easy To Use, Fine Finished, Rust Free Nature
• Surface Finishing: Polished
• Opening Style: Single
• Instruments Type: DETECTOR
• M.R.P. / PIECE: 10125.00rs

The HNL Flame Detector is a compact and highly responsive Flame / Fire Detector. The Unit incorporates an extremely sensitive sensing circuit that responds to high energy sources in a bandwidth of 185 – 260 nm with optimum spectral sensitivity centred around 200 nm.Thus HNL Flame Detector is the most effective in early detection of a fire before they can possibly cause damage. In contrast, other types of detectors operate at a disadvantage. Smoke detectors do not operate until the fire has developed into a sufficient size to accelerate smoke along with strata of hot air rising to the detector.It is particularly suitable for use in outdoor applications because it is not affected by wind or rain. Various modelsto detect & control the presence or absence of flame are available.

We offer Temperature and smoke detector - fire control. the fire control pro is a state-of-the-art smoke detector neatly integrated in the control pro family from steinel professional. As a dual sensor, the fire control pro uses two detection methods for twice the safety: smoke and temperature detection. Smoke is detected in a specially designed smoke chamber, temperature by a thermo-differential sensor. it provides the capability of reliably detecting different types of fi re, such as burning liquids or smouldering fi res. This also makes the system less receptive to kitchen and bathroom vapours, dust or electrical interference pulses. The fire control pro benefi ts from processor-controlled signal evaluation and drift compensation, preventing any triggering of false alarms to the greatest possible extent. # 2 detection sensor variables: smoke and temperature (optical/thermal) # light sensor for low-battery warning during the day (loud acoustic warning signal) # 24 h auto-calibration # microprocessor-controlled signal evaluation # symmetrical-flow smoke chamber # temperature-drift correction # cyclical self-test function # also suitable for kitchens and bathrooms # design co-ordinated with presence detector for a neat ceiling look smoke detection can be deactivated for 15 minutes by function button (e.g. In the event a large controlled quantity of smoke coming from a saucepan); with temperature detection remaining active. To begin with, a light sensor only allows the acoustic low-battery warning to sound during the day. Only when battery capacity becomes critical is a warning also given at night. In addition to the 9-v battery (lithium or metal hydride), the fire control pro smoke detector also comes with a 230-v connection and a communication port for interconnecting detectors. Needless to say, the steinel fire control is vds-tested and has a self-test feature. mounting : - ceiling mount. battery : - -v mh block battery, or 9-v long-life lithium block battery. battery failure signal : - 30 s cycle, 30 days. acoustic alarm : - 85 db (a) maximum detection zone : - 80 m2 relay contact : - 1 a 250 v response time (t90) : - 5 min supply : - 230v ac ip rating : - ip 40. http://www.pir-motion-sensor.com/fire-smoke-detector.php

• Certification: CE Certified, ISO 9001:2008
• Condition: New
• Power: 9-12kw
• Driven Type: Electric
• Warranty: 1year

We offer secured online and offline payment processing methods. The transaction, done through online mode, is instantly forwarded to the payment system. We also accept bank account transfers, cash payments, etc. We have established a state-of-the-art warehouse facility and equipped it with the latest inventory control system. Thus, we can take care of seasonal supply, wholesale supply, and quick supply among others.   Principle :Specific gravity of the sample & distinguish the real precious metal from the fake material.   Ease : Thanks to inbuilt measuring software which makes it operations easy.   Application : Gold Valuer Jewellery Showroom Bank & Financial Institution Fake Gold   FUNCTIONS : GOLD : User can select either copper or silver individually as mix material in GOLD for purity measurement. PLATINIUM : User can select either palladium or Ruthenium or Cobalt individually as mix material in PLATINUM for purity measurement.   Advantages To Detect Fake Gold Jewellery Precious Metal Karat Tester Evaluating the purity of GOLD in % / Karat. Non-destructive. precious metals like Platinum & Silver can be tested by Optional mode. Can be used as a normal scale or Densimeter.

• Type: Portable Gas Detector
• Certification: CE Certified
• Color: White, Blue
• Feature: Easy To Use, Portable
• Condition: New
• Application: Gas Detecting
• Display Type: Digital
• Warranty: 1Year
• Gas Type: Combustible Gas
• Brand Name: Ambetronics
• Detected gas: toxic,o2,n2

We are offering metal detectors.

• Model Name/Number: C7027A1049
• Brand: Honeywell
• Operating Temperature: Minus 18 deg.C to 102 deg.C, or Minus 40 deg.C to 102 deg.C
• Max. Pressure Rating: 5 psi
• Mounting: Collar with 1/2-14 NPSM internal threads for mounting on a 1/2 in. sight pipe
• combustion controls/amplifiers: R4341/R7323, R4343/R7323, R4344/R7323

• Country of Origin: France
• Type: Gas Monitor
• Application: Industrial Use
• Color: Black
• Voltage: 220V
• Condition: New
• Connectivity: Wired, Wireless
• Make: Oldham
• Model: BM25
• HC: 0-100% LEL
• O2: 0-25% Vol.
• CO: 0-2000ppm
• H2S: 0-100ppm
• Sensors: Catalytic, Infrared, Electrochemical, PID
• Battery: Upto 6 days continious running

Tablet Metal Detector, meeting the pharmaceutical industry’s requirements for sensitivity, stability and sanitation. This Pharma Metal Detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worn sieve wires or splintered dies. Its compact design accommodates many space-restricted areas within tablet and encapsulation rooms. Metal Detector provides 100% in-line inspection of tablets and capsules at the outlet of the press and screens for ferrous, non-ferrous and stainless steel contaminants. It has many features to enhance quality control measurements without interfering with smooth high-speed tablet manufacturing. This also allows easy integration with dedusters and collection drums. The construction of this special Stand saves space into the production room and reduces the retention areas. Cross contamination from production changes is prevented by its clean design and easily removable throughput chute, reject gate and cover. The scanning capacity is 10,000 tablets per minute and the metal detection head is fully adjustable for the height and  angle to ensure the best possible speed and detection accuracy. The Metal Detector chute cab be quickly and easily dismantled for routing cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet compression machine and dedusting systems. Flexible operating height, angle and frame with lockable casters allow for easy integration to any production facility. The complete unit takes up minimum system length. Features: Automatic Balance Principle  Ferrous / Non-Ferrous Detection & Rejection. Reject Confirmation and Indication For Irregularities. Toughness to Vibration And Noise. Digital Signal Processor. Rugged Mechanical Construction. Automatic Parameter Retention. Improved and Compact Search Coil. Date and Time Recording for Routing QC Checks. Timer with Adjustable Delay and Duration for Reject Device Control. All Sensitivity Checks, Settings and Routine QC Checks are recorded. Stable Operation on Mineralized or Conductive Products. LED bar Graph to Display the Status of Coil.

Hdpe Granules, Plastic Raw Material, Plastic Raw Materials

Microprocessor Based Operation, Digitally Controlled, auto tuning, auto setting.Rugged structure , made from ABS sheet, detachable for ease to install & transport, ABS Plastic molded top and shoes, with provision for screwing shoes to ground. Has aluminum strip with polycarbonate strip-insert on both sides for extra strength and high aesthetics.Detects all Metals, Zinc & Metal Alloys, ferrous / non-ferrous metals using single detection program. Test samples as per IS : 14132 : 1992.Indian NABL approved Lab tested, safe for people with pace makers, pregnant woman, digital devises, magnetic media., tested as per ICNIRP guidelines.    

• Gas Measured: Combustible Gases
• Range: 0 to 990 ppm, 0 to 70% LEL autoranging
• Methane Sensitivity: 10 ppm
• Probe: 16" (41 cm)
• Response Time: Less than 1 second
• Battery Type: Three C batteries
• Battery Life: 50 hours continuous
• Length (in): 10
• Height (in): 1
• Width (in): 3 1/2

• Warranty: 1 Year
• Accuracy: 1% of the full scale value
• Theory: Temperature Recorder
• Brand Name: Ambetronics
• Model: GT-2511-WP-PID
• Application: Industrial
• Enclosure: Weatherproof
• Item Code: GT-2511-WP-PID

• Power Source: Battery
• Alarm Current (A): 3A 
• Battery Life: 10 years
• Voltage (V): 12 v
• Weight (g): 200g
• Shape: Round
• LED Indication: Yes

The robust constructed compact testing device - easy to handle and very effective, designed to fit in any pocket, is also appropriate for harsh industrial environments. The SONAPHONE Pocket accessories include airborne and structure-borne sound probes. You will receive the appropriate probe for your application from our product range, which you can attach to the device with just one simple movement. You do not need much time or expensive training in order to perform the test procedure. Compact ultrasonic meter for preventive maintenance Find leaks and save energy Preventive alarm in case of bearing failure Compact design Easy to use External accessories - wide range of applications   SONAPHONE Pocket finds the problems before they cause serious cost to your company. Only by determining and eliminating leakage points in the compressed air system can energy savings of up to 35% and thus cost savings be achieved. In addition, it ensures the safety and efficiency of industrial processes, for example, by preventing defects in bearings and electrical equipment. Applications of ultrasonic devices: Finding leaks in compressed air, gas or vacuum systems Wear test on rotary equipment Find signs of electrical equipment partial discharge or insulation faults to ensure safe operation Use to test steam lines, save energy, reduce vapor loss and steam system failures Pressure-free systems for compactness testing

• Material: Polycarbonate
• Detector Type: Fixed Single Gas
• Brand: OLDHAM
• Measuring Range: 0-10 ppm
• Model: CTX300
• Name of Gases Detected: Chlorine Cl2
• Sensor Life: 2 years
•  :  

• Features: Wide detecting scope Highly stable with long life Fast response and high sensitivity Used for detection of LPG Gas

Only detector available which is kitchen platform panel mountable 100% more effective than competing products in terms of ability to detect LPG Additionally it can also detect heat, very useful features for kitchens

manufacturers and authorized agent of various type of fire detection and protection products including nitie; apollo and airsense brands and also lstk project undertaking of various fire detection and protection such as hydrants; water based protection products and also installations of gaseous fire suppression products etc.

• Power Consumption: 3W max
• Dimensions: W158 ×H116×D68mm
• Weight: 1.2kg Approx.
• Display Type: Digital
• Model: Cosmos KD-12A
• Measurement Range: 0-100 ppm

MSA Chillgard VRF Refrigerant Leak Detector is the first industry detector for Variable Refrigerant Flow Systems (VRF) with integrated BACnet capability. Therefore, it can be directly connected with any Building Management Systems (BMS). MSA applies its proven Photoacoustic infrared sensing technology that provides a stable zero baseline, minimizes cross-sensitivities and offers low cost of ownership through minimum maintenance required.   Low-level detection at 25 ppm minimum detection Versatility—capable of operating within wide temperature and humidity ranges Low maintenance—no moving parts and stable PAIR sensor technology Easy installation—simply secure back plate to wall 20-year proven photoacoustic infrared sensing technology Digital communications BACnet® Modbus