Electronic Detectors Dealers in Sakinaka, Mumbai

Model 2620 single channel digital control modules are designed to supervise and display the status of a single integral or remote (2620 R) sensor assembly. Model 2620 is housed in a NEMA AX wall mount enclosure or Ex- proof enclosure. Model 2620R Single Channel controllers interface with industry standard two or three wire 4-20 mA sensor or other standard voltage / current sensor transmitters and provide the user with concentration display and two independent adjustable alarm levels. The 3 J4 digit LCD or Alphanumeric LCD display can read the concentration. LEDs on the front panel provide indication of all three alarms. The alarm relays can be programmed to be either latching or non-latching and to activate either as a rising or failing alarm. The relays are SPDT Form C type rated at 5 Amps, to provide direct alarm action, reducing the need for interposing relays. Local Alarm devices can be connected to the configurable on board alarms. The Fail Safe Supervisory provides a reliable indication that the Monitor is fully operational. I he "hail Safe" design monitors the input power and status of the power supply for the amplifiers. A failure of any one of these functions illuminates a "Fault" Light Emitting Diode. The HEART of any Analytical system is the SENSOR. It is the most critical component in overall system performance. Because no single sensor technology is ideal for all applications, ENDEE offers TEN different sensor technologies. This capability is mandatory in today's complex industrial market. Command of each of these technologies enables us to "FITTHE PRODUCTTO THE APPLICATION", and assure long-term service and reliability & optimal performance in every application. The Monitor is a Single Gas Multi-purpose monitor that combines simplicity and high performance in a low cost low maintenance package. The rugged NEMA 4X or 7X assembly is suitable for a variety of industrial, commercial and general purpose applications to monitor HAZARDOUS,Toxic gases or Oxygen iri Process Fuel Gas or Ambient Air. Fast and accurate response. Long Life Applications Specific Gas Sensor Tech. Solid State Electronics Continuous Monitoring Two Alarm Levels Fail Safe Protection Recorder Output Integra or Remote Sensing Sensor Un-attended Operation Sampling by Diffusion or sample Draw Pump. Flexibility to fit your application needs Interfaces with Industry Standard Transmitters. The HEART of any Analytical system is the SENSOR. It is the most critical component in overall system performance. Because no single sensor technology is ideal for all applications, ENDEE offers TEN different sensor technologies. This capability is mandatory in today's complex industrial market. Command of each of these technologies enables us to "FITTHE PRODUCTTO THE APPLICATION", and assure long-term service and reliability & optimal performance in every application.

Our organization is a one-stop stop and the best destination for acquiring superiority guaranteed Smoke Detector Camera. We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.

Inline Tunnel Metal Detector Tunnel metal detectors can be integrated with conveyor systems to provide inline metal detection solutions, capable of detecting and rejecting all types of metal, preventing contaminated products from reaching end consumers.

• Alarm Mode: Vibration, Sound
• Range: 4 -6 feet

The company is a highly acclaimed Supplier of Metal Detectors. The Metal Detectors, offered by the company, can be availed in a wide range that includes Door Metal Detectors, Black Hawk Metal Detectors, Hand Held Metal Detectors, Phantom Metal Detectors, Baggage Metal Detectors, Stealth Metal Detectors and Bag Metal Detectors. The company offers the Best Metal Detectors at the best prices on a timely basis.

• diameter: minimum 6mm

Detect all Type of Ferrous and Non- Ferrous Metal Alloys Light Weight with Strong ABS Body Easy to operate Operate on Dry and Rechargeable Mode Variable Sound Effect as per Metal Volume, Vibration Mode Option Harmless for Heart patients.

Flame and Gas Detection systems with/without SIL certified controlling & PLC conforming IEC 61508. These systems are also supplied wireless communication using HART/ ISA 100/ GSM wireless. SIL 2 certified Hybrid Sensors SIL 3 certified Controllers Point IR Gas Detectorss Open Path IR Gas Detectors Catalytic Detectors Electrochemical Detectors Metal Oxide Semiconductor Detectors Flame Detectors Photo Acoustic Detectors Ultrasonic Gas Leak Detectors

Flame and Gas Detection systems withwithout SIL certified controlling & PLC conforming IEC 61508.These systems are also supplied wireless communication using HART ISA 100 GSM wireless.Metal Oxide Semiconductor Detectors.

We are offering metal detectors.

• Brand Name: GFG
• Gas Type: Combustible Gas
• Brand Name: GFG
• Detector Features: Adjustable Sensitivity
• Display Type: Digital
• Minimum Order Quantity: 1 Unit
• Display Type: Digital

The gas detection controller GMA200continues with the tradition of the company under consideration of innovative technology and trend-setting flexibility. It is designed for commercial and industrial applications for the measurement of combustible and toxic gases as well as for the measurement of oxygen. The compact construction of the GMA200-MW4provides a cost-efficient solution for safe gas monitoring of industrial facilities.Parallel Measurement and flexible applicationUp to four analog and 16 digital transmitters can be connected to GMA200-MW4 and monitored simultaneously.Via the configuration software the measurement range, the measurement designation, the type of transmitter and the type of gas can be set individually as well as three alarm thresholds can be programmed for every connected single transmitter.The microprocessor of the GMA200-MW4 evaluates all receiving signals and activates alarm and relays. In doing so one single gas detection controller GMA200-MW4 can master different gas detection tasks.Integrated RelaysPermanent increasing demands on safety measures require complex gas detection systems and redundant protective measures to protect from gas hazards.Therefore the GMA200-MW4 has six internal relays. For the implementation of safety measures and alarm, four relays can be programmed freely so that in case of alarm the safety measures can be triggered automatically. The programming grants wide-ranged and flexible possibilities like allocation of one or more measurement point s to relay,single alarm per measurement point,configuration of collective alarm and group alarm, error report and voting function. For each, safety related error report and maintenance, one further relay is available.Graphic displayThe clear conception of the controllerGMA200-MW4 allows the rapid recognition of hazardous situations. Current measurement values are shown continuous on the LCD- graphic display.At Alarm a red back light is active.Technical dataMeasuring gases: combustible and toxic gases and vapours, for all GfG transmittersDisplay and control elements: 2,2"-LCD graphic display; 5 button keyboard (left, right, up,down, OK); 13 LEDs for Alarms, operation and Relay statusEnvironmental conditions: for storage:-25..+60°C | 0..99%r.F. (recommended 0...+30°C)for operation: -20..+55°C | 0..99%r.F.Power supply:Operating voltage: 100-240V AC 50-60Hz or/and 24V DC (20-30V DC valid)Power consumption: max.7W (without Transmitter) max.25W (with Transmitter)Fuse: F1=T 500mA (for GMA200-MW4) F2=M 1A (for Transmitter)Transmitter connection:Power supply: 24V DC ±3% with built in power supplyunit, otherwise 20-30VDC (see above) 4x 150mA respectively Itotal=0,6A atany other subdivisionRS485 outputs:TRM-Bus1+2: RS485; Half-Duplex; max. 38400 Baud (only for GMA200-MW4 relay modules)GMA-Bus: RS485; Half-Duplex; galvanically isolated; max. 230400 Baud (for GMA200-MW4 relays modules, control center, PC, SPS or Gateway)Relay Outputs:Contactors: Six Relays with one open contact eachContact current capacity:3A/250V AC or 3A/30V DCAnalog outputs: 2 x analog output4-20mA (burden max.560Ω)free allocatableAlarm acknowledgement inputs: 2 x Reset, free allocatableData logger (optional): 2GB microSD memory card with FAT (FAT16) formattingUSB terminal: Mini USB jack for configuration of the device via PCConnection cable:Cable entries: max. 9 units M16x1,5 (for cable cross section 4,5-10mm)Housing:Protection: IP65Material: PlasticsWeight: ca. 890gDimensions: 209 x 180 x 64mm (W x H x D)Approvals/Testings:Electromagnetic compability: DIN EN 50270:2006Electrical Safety: DIN EN 61010:2010 Additional Information: Item Code: GMA200 Pay Mode Terms: T/T (Bank Transfer),Other Port of Dispatch: Mumbai Packaging Details: One Sensor Per Box

Multi Zone door Frame detector,is backed with technological superiority and quality. It is a highly dependable and Simple to operate by actual user on site. Audio and visual alarm is provided to draw an attention of the user. An audio alarm varies with the volume of metal detects. The convenient slabs of Sensitivity levels offer freedom for user to assign Severity of security level. A special feature of ''FERRITE'' detection is provided to detect special weapons made with ferrite material which is impossible to detect with conventional metal detects. IN and OUT programmable counters give a statistics of the incoming and out going traffic.Details : A Hand Held metal detector is a carefully designed device, ideal for detecting metal on HUMAN BODY and an OBJECT for security purpose. It is designed and manufactured as per related IS. (Indian standard). It''s design is such that it dose not affect an in-planted PACEMAKER. Due to its ultra high sensitivity it is an ideal detector for jewelry and precious metal industries. Battery charger is built-in so it''s handling become very easy.

The HNL Flame Detector is a compact and highly responsive Flame / Fire Detector. The Unit incorporates an extremely sensitive sensing circuit that responds to high energy sources in a bandwidth of 185 – 260 nm with optimum spectral sensitivity centred around 200 nm.Thus HNL Flame Detector is the most effective in early detection of a fire before they can possibly cause damage. In contrast, other types of detectors operate at a disadvantage. Smoke detectors do not operate until the fire has developed into a sufficient size to accelerate smoke along with strata of hot air rising to the detector.It is particularly suitable for use in outdoor applications because it is not affected by wind or rain. Various modelsto detect & control the presence or absence of flame are available.

• Model Name/Number: C7027A1049
• Brand: Honeywell
• Operating Temperature: Minus 18 deg.C to 102 deg.C, or Minus 40 deg.C to 102 deg.C
• Max. Pressure Rating: 5 psi
• Mounting: Collar with 1/2-14 NPSM internal threads for mounting on a 1/2 in. sight pipe
• combustion controls/amplifiers: R4341/R7323, R4343/R7323, R4344/R7323

• Type: Portable Gas Detector
• Certification: CE Certified
• Color: White, Blue
• Feature: Easy To Use, Portable
• Condition: New
• Application: Gas Detecting
• Display Type: Digital
• Warranty: 1Year
• Gas Type: Combustible Gas
• Brand Name: Ambetronics
• Detected gas: toxic,o2,n2

• Country of Origin: India
• Type: Veterinary Instruments
• Material: Stainless Steel
• Application: Veterinary Use
• Color: Black
• Feature: Best Quality, Easy To Use, Fine Finished, Rust Free Nature
• Surface Finishing: Polished
• Opening Style: Single
• Instruments Type: DETECTOR
• M.R.P. / PIECE: 10125.00rs

• Type: Metal Detector Gate
• Material: Ply or ABS
• Shape: Rectangular
• Style: Common
• Color: Blue, Brown
• Feature: Anti Corrosive, Anti Dust, Anti Zunk, High Quality
• Finishing: Polished
• Width: 2-4ft
• Frame: Single Frame
• Height: 7ft
• Opening Type: Open
• Automation Grade: Automatic
• Size: 7 feet
• Brand Name: SMB
• Application: Metal Detector Door

• Technical Specification: UL / Vds / LPCB approved

We are offering beam smoke detector. The fireray⮠50r/100r series of reflective infrared optical beam smoke detectors are comprised of a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below and parallel to the ceiling. Lateral detection may be up to 7.5 metres either side of the beam. Applications the fireray⮠50r/100r series of reflective infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces with high ceilings, particularly if access to �point type� smoke detectors presents practical difficulties. key benefits single compact housing area coverage 50 metre or 100 metre model available 12-24 vdc operation low current consumption robust construction conforms to: bs5839 part 5 and en54 part 12, ul and vds

Tablet Metal Detector, meeting the pharmaceutical industry’s requirements for sensitivity, stability and sanitation. This Pharma Metal Detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worn sieve wires or splintered dies. Its compact design accommodates many space-restricted areas within tablet and encapsulation rooms. Metal Detector provides 100% in-line inspection of tablets and capsules at the outlet of the press and screens for ferrous, non-ferrous and stainless steel contaminants. It has many features to enhance quality control measurements without interfering with smooth high-speed tablet manufacturing. This also allows easy integration with dedusters and collection drums. The construction of this special Stand saves space into the production room and reduces the retention areas. Cross contamination from production changes is prevented by its clean design and easily removable throughput chute, reject gate and cover. The scanning capacity is 10,000 tablets per minute and the metal detection head is fully adjustable for the height and  angle to ensure the best possible speed and detection accuracy. The Metal Detector chute cab be quickly and easily dismantled for routing cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet compression machine and dedusting systems. Flexible operating height, angle and frame with lockable casters allow for easy integration to any production facility. The complete unit takes up minimum system length. Features: Automatic Balance Principle  Ferrous / Non-Ferrous Detection & Rejection. Reject Confirmation and Indication For Irregularities. Toughness to Vibration And Noise. Digital Signal Processor. Rugged Mechanical Construction. Automatic Parameter Retention. Improved and Compact Search Coil. Date and Time Recording for Routing QC Checks. Timer with Adjustable Delay and Duration for Reject Device Control. All Sensitivity Checks, Settings and Routine QC Checks are recorded. Stable Operation on Mineralized or Conductive Products. LED bar Graph to Display the Status of Coil.

Hdpe Granules, Plastic Raw Material, Plastic Raw Materials

• Certification: CE Certified, ISO 9001:2008
• Condition: New
• Power: 9-12kw
• Driven Type: Electric
• Warranty: 1year

We offer secured online and offline payment processing methods. The transaction, done through online mode, is instantly forwarded to the payment system. We also accept bank account transfers, cash payments, etc. We have established a state-of-the-art warehouse facility and equipped it with the latest inventory control system. Thus, we can take care of seasonal supply, wholesale supply, and quick supply among others.   Principle :Specific gravity of the sample & distinguish the real precious metal from the fake material.   Ease : Thanks to inbuilt measuring software which makes it operations easy.   Application : Gold Valuer Jewellery Showroom Bank & Financial Institution Fake Gold   FUNCTIONS : GOLD : User can select either copper or silver individually as mix material in GOLD for purity measurement. PLATINIUM : User can select either palladium or Ruthenium or Cobalt individually as mix material in PLATINUM for purity measurement.   Advantages To Detect Fake Gold Jewellery Precious Metal Karat Tester Evaluating the purity of GOLD in % / Karat. Non-destructive. precious metals like Platinum & Silver can be tested by Optional mode. Can be used as a normal scale or Densimeter.

• Country of Origin: France
• Type: Gas Monitor
• Application: Industrial Use
• Color: Black
• Voltage: 220V
• Condition: New
• Connectivity: Wired, Wireless
• Make: Oldham
• Model: BM25
• HC: 0-100% LEL
• O2: 0-25% Vol.
• CO: 0-2000ppm
• H2S: 0-100ppm
• Sensors: Catalytic, Infrared, Electrochemical, PID
• Battery: Upto 6 days continious running

• Model Number: IRD811D
• input: accelerometer IRD521
• Packaging Details: Packed in Corrugated Box
• spike energy: 20gSE,200gSE,2000gSE
• Power requirements: internal battery 2nos of 9v,100mah dry cells
• Frequency range: displacement 300cpm to 24000cpm
• velocity range: 20mm/s,200mm/s,2000mm/s pk
• Display: LCD
• Port: Mumbai
• Product name: IRD811D
• Supply Ability: 10 Set/Sets per Week

• Product Applications: On demand room ventilation

The Model CDD Duct Mount Carbon Dioxide Transmitter monitors the occupancy in a room by detecting the concentration of carbon dioxide in the return air duct. The non-dispersive infrared sensing technology automatically updates the calibration of the transmitter using a proprietary logic feature which limits the amount of error due to drift. The Model CDD can measure up to 2000 PPM in duct air flows less than 1500 FPM.

• Display Type: Digital
• Weight: 450 grams
• Gas Type: Hydrogen (H2)
• Brand Name: Cosmos
• Power Source: Battery
• Display Range: 0 to 10,000 ppm
• Accuracy: +- 5%
• Alarm System: Audio Visual
• Battery Life: 20 hrs
• Battery Type: 4 x AA Alkaline dry cell
• Usage/Application: Cylinder Storage,Gas Pipe Line,Hydrogen Turbine
• Dimensions: 82 x 162 x 36 mm
• Sensor Type: Catalytic
• I Deal In: New Only