Electronic Module Dealers in Mumbai

• Current: 200-300 A
• Brand Name: IRI
• Features: Strongly developed, Dimensionally accurate
• Package Type: Box
• Power: 5-15 W
• Voltage: 300-400 V

• Brand Name: EspressIF

• Feature: Good Quality, Light Weight
• Packaging Type: Box
• Warranty: 1 Year
• Country of Origin: India
• Brand Name: ESP
• Application: Give any microcontroller access to your WiFi network

UART To Wi Fi Module We are one of the leading suppliers and traders of  UART To Wi Fi Module.Our range of product-line is a complete ultra low power embedded TCP/IP solution. These are manufactured using high-grade raw materials and are procured from trusted vendors and are provided after in-depth research regarding the market trends and clients demands.   Following are the main functions of the product-line offered by our organization:   Support for UART data serial, four baud rate options: 19200 / 38400 / 57600 / 115200bps. Wireless data rates support the 802.11b Standard, the maximum rate is 11Mbps. Integrate the functions of 802.11 MAC protocol Softwares. Support for the STA appliances in the Infrastructure Network. Support for the Open/WEP mode authentication. Support for the wep64/wep128/ccmp/wpi data encryption transmission in the shared key mode Support for the automatic networking mode and manual networking mode. In the automatic networking modethe module can automatically scan the target network, and automatically connect when disconnection. In the manual networking modeoperation of connect and disconnect is touched off by orderthis supports a flexible control space. Support the network data transmission in RAW/UDP/TCP format. Support seven groups of the basic parameters set,and can connect to seven target networks the most. Support to Con fig. the parameters through user serial. Support to upgrade the fire-ware on line by the Internet.

The company is one of the renowned Importers and Suppliers of WiFi Modules in Mumbai (India). The GSX WiFi Modules are a completely TCP/IP solutions with numerous attractive features. The company offers the ultra low power WiFi Modules to the clients which are known for their power efficiency. The WiFi Modules are indeed a new class of the internet-enabled products with remarkable efficiency. Features Of WiFi Modules : Stand alone and embedded wireless 802.11 b/g networking moduleRN-131G: 802.11 b/g Ultra low power, surface mount moduleUltra low power 4uA sleep, 35mA RX and 200mA max TXOver the air firmware upgrade (FTP)Host data rate up to 4Mbps for SDIO and SPI and 921K over UARTUses only 100mW when awake and 10uW when asleep10 general purpose digital I/OSupports ad-hoc and infrastructure networkingAccepts 3.3VDC regulated or 2-3VDC batteryCan run for years on two standard AAA batteriesUART hardware interfacesSecure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSKCombination of ultra low power and the ability to wake up, connect to a wireless network, send data, and return to sleep mode in less than 100 millisecondsBuilt-in networking applications & On-board TCP/IP stack contains TCP, UDP, DHCP, DNS, ARP, ICMP and FTP protocols8 analog sensor interfacesCertified product (FCC/CE/EN)Real-time clock for time-stamping, auto-sleep, and auto-wakeup modesConfiguration over UART or wireless interfaces using simple ASCII commands

• Model Name/Number: HC05
• Power Supply: 56V
• Working Temperature: -20
• Range: 5 M
• Product Weight: 15 g
• Warranty Period: 1 Y

Earlier, when valves and tubes were part of the electronic circuit, the system modularity was limited to 1U. Today this type of packaging has declined as all such components have become miniaturized and are put on PCBs which are mounted and put in an insert module. Features: All Euro sizes: of PCBs as per DIN and IEC standards can be housed in this product range. Skeleton frame structure: to which all PCBs and mother boards can be assembled and the top, side and bottom can be separately assembled. Mounting: is very easy as depth and horizontal profiles are of solid construction. Pre-punched holes: at a pitch of 15mm all along the depth make mounting of PCBs very simple. T-groove: wherein pre-threaded m3 strips can be slided.

• Standby power consumption: < 1.0mW (DTIM3)
• Wake up and transmit packets in: < 2ms
• Flash Memory: 1MB
• Power down leakage current: <10uA

• Frequency: 2.4GHz ISM band
• Modulation: GFSK
• Emission power: Greater than or equal to 4dBm, Class 2
• Sensitivity: 0.1% BER
• Power supply: 3.3VDC 50mA
• Working temperature: -20
• Dimension: 26.9mm x 13mm x 2.2 mm

Thermoelectric technology is an active thermal management technique based on the Peltier effect. It was discovered by J.C.A Peltier in 1834, this phenomenon involves the heating or cooling of the junction of two thermoelectric materials(bismuth and telluride) by passing current through the junction. During operation, direct current flows through the TEC module causing heat to be transfered from one side to the other. Creating a cold and hot side. If the direction of the current is reversed, the cold and hot sides are changed. Its cooling power also can be adjusted by changing its operating current. A typical single stage cooler (Figure. 1) consists of two ceramic plates with p and n-type semiconductor material (bismuth ,telluride) between the ceramic plates. The elements of semiconductor material are connected electrically in series and thermally in parallel.

• Bluetooth Version: V4.1+EDR
• Supports: A2DP/AVRCP
• Output: 2.4GHz HD Stereo
• Bluetooth Range: Up to 33 Feet (10Mtr)
• Model No: ZKZMTMUSICBUDY / 1116423
• Brand Name: Zoook

• Type: Bluetooth Module
• Material: Aluminium, Plastic, Polyester Film, Raw Aluminium
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Condition: New, Old
• Power Type: AC, DC
• Frequency: 50Hz, 60Hz
• Driven Type: Battery, Electric
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Phase: Double Phase, Single Phase, Three Phase

• Brand Name: satronix
• Frequency: 50/60 Hz
• Auxiliary Voltage: 230 V AC
• Ambient Temperature: -10 to 55 Deg C
• Humidity: 10 to 95% without condensation
• Display: LED

• Features: constant current, constant voltage, constant resistance, constant power, constant impedance.
• Power: from 200 W to 600 W

• Type: Wifi Module
• Shape: Rectangular, Square
• Application: Camera, Internet, Smart Home
• Color: Black, Blue
• Condition: New, Used
• Packaging Type: Box, Carton
• Feature: Durable, Good Quality, Strong
• Warranty: 1 Year, 2 Years

• Operating Temperature: 0-40 Deg C
• Storage Temperature: -40-70 Deg C
• Interface: One 10/100Mbps LAN/WAN reset interface
• Operating Humidity: 10%-90%RH no condensing
• Frequency Range: 2.4-2.4835 G
• Storage Humidity: 5%-90%RH no condensing
• Transmitting Power: 12-15 DBM

• Dimension: 25 x 15 x 11 mm (LxWxH)
• PCB Thickness: 1 mm
• Weight: 2 gm
• Item Code: ESP8266ESP0

• FEATURES: Reversing polarity of magnet housing DC motors, Two integrated DC contactor also provide the feature of dynamic braking for permanent magnet motors.

High-speed Baud Rate : serial baud rate up to 3Mbps; have high speed in large amount of data transmission applications like WIFI printer,WIFI serial camera and WIFI high-speed data acquisition. Onekey WIFI Connection : support two fast networking ways--"SimpleLink" and "UsrLink";perfectly solve problems of complex networking operation in smart home applications. RegistryPackage Function : send registry data package immediately after TCP connection,which is convenient for server identifying and processing;registry data package supports custom ID and MAC. Baud Rate Sync : support using USR Visual Serial Software（USR-VCOM）.