Electronic Test Instruments Dealers in Ganpatrao Kadam Marg, Mumbai

60° measuring angle.Measurement spot 8 x 16 mm 0.315 x 0.63 inch. Automatics measurement range selection gloss mirror gloss mode. Gloss measurement 0 - 150 gloss units. Mirror gloss measurement 150 - 1000 gloss units. Automatic calibration. Extraneous light compensation. USB interface.

• Automatic Grade: Manual
• Application: Testing Water Level
• Feature: Accuracy, Easy To Fit
• Display Type: Analog

  Principle of Operation   Here in this case this indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rises the float, which buoys up, moves the connecting pipe to the region of visibility on top.For Transmitter TypeThe magnet holder attached on top of the connecting stem of the float buoys up along with the level rise and it cuts in or out a series of resistors kept sealed outside the level           Material specification   Customized suiting to the service media and op. conditionsAvailable in SS 304/ SS 316/ PP/ PVC/HDPE/ PVDF/ PTFE etc.

It consists of digital display up to 6 Digits (Meters / Yards) with encoder. Preset is possible as per settings (Machine stops automatically when it reaches input value.)

Campbell electronics portable digital hardness tester model HT-30/50 is designed to replace the non-digital, troublesome and expensive handheld hardness tester in the market. HT-30/50 allows measuring the hardness either in Kilopond, Newton, Strong Cobb or in Pounds..     Placing the sample on platform and rotating the knob on lead screw manually, pressure will be applied. The applied pressure is monitored electronically by microcontroller and the value is recognized, registered and displayed at the moment of breakage of the sample. The hardness value will be displayed on four digit LED display, same can be viewed in alternative unit (Kp/N/Lb/Sc) by simply pressing one soft membrane key on control panel. Calibration can be carried out at location and requires only few minutes. Using the optional calibration kit (Certified 5kg weight and its holder) user can easily calibrate the instrument when ever required. Optional serial printer port / PC connectivity is also available.   Features Very compact, simple & Easy to operate. Cost Effective Selectable units of measurement-kilopond (kp), Newton (N), pounds (lb or Lbf) and strong cobb (sc) Microprocessor based reading of measurement.. Easy to calibrate.  

• Type: Battery Tester
• Application: Control Panels, Industrial Use, Power Grade Use
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Condition: New, Used
• Frequency: 45Hz, 66Hz
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power Source: Battery
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish
• Operating Current: Double Phase, Single Phase, Triple Phase
• Warrenty: 1year, 2years
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature

We are offering digital length counter meter. digital length counter meter it consists of digital display up to 6 digits (meters / yards) with encoder. Preset is possible as per settings (machine stops automatically when it reaches input value.)

• Application: Measuring
• Material: Metal
• Type: Magnetic Level Meter
• Current Rating (Amps): 4

• Moisture Range: 5%-40%
• Power: 9V battery
• Weight: 796g
• Accuracy: ±0.5%
• Temp.Compen.: Automatic
• Testing Time: 30 seconds
• Display: Digital L.C.D
• Opt.Temp: 0°C-54°C
• Circuit: IC-Microprocessor based
• Casing: High impact resistance material

Pre-paid gas meter is a gas meter with additional Electronic Control Unit(ECU) ON traditional diaphragm type gas meter, realizing digital and intelligent management of gas measurement. It adopts high quality diaphragm gas meter as its base meter which is manufactured in compliance with IS 14439-1 & 11 BS EN 1359:1999 Standards. The key components of the mater are made of intensified special material with world’s advance production level and test lab equipments. Mechanical meters have reformed the traditional supply of gas, generation of bills for gas consumed and collection of payment against gas supplied. Prepaid gas meters with modernization, safety, reliability performances and modern management characteristics ensure the benefits of supply and demand are not violated and revenues are intact. Hand Held Device for Prepaid Meters A portable hand held device for prepaid meters is available which can perform functions like “create new customers”, “recharge customer card”, “reverse the charge”, “check tampers” and is attached with a printer used for printing transaction records for the consumer. The printing module is a thermal printer and has the facility to automatic feed and cut printed paper. The printer is connected with microcontroller through USART serial communication protocol to store customer records. It can store at a time data upto 500 customers.

• Place of Origin: Maharashtra, India
• Port: nhava sheva
• Packaging Details: International Standard Packing
• Gas Type: Measuring Instruments

Prepaid meter for High Flow and Pressure Requirement (Turbine Meters & RPD Meters). Moreover, we continuously strive to improve our product offering and increase customer satisfaction levels through technological developments and unmatched after-sales support.

• Type: Multimeter
• Application: Industrial Use, Power Grade Use
• Condition: New
• Power Source: Battery
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish
• Operating Current: Double Phase, Single Phase
• Temperarture Capacity: High Temperature, Low Temperature, Medium Temperature

• Display: Digital 12 mm Red LED
• Accuracy: ± 0.01 pH, ± 1 mV, ± 1 Count
• Weight: 2.5 Kg. approx.
• Range: PH : 0.00 to 14.00 pH MV : 0 to :t 1999 mV.
• Slope Adjustment: 80 to 120% at 25°C. Manually adjustable setting on calibrated
• Temp. Compensation: Dial between 0°C to 100°C.
• Temp. Compensation: Dial between 0°C to 100°C.
• Input Impedance: > 10¹² Ώ
• Electrode Connector: BNC type for Combined pH Electrode.
• Dimension: 180 W x 180 D x 80mm H

Features Advanced Micro-controller based. US FDA 21 CFR Part 11 Compliance SW and HW. 16x2 LCD / 128x64 GLCD / 3.5" color TFT display. 4/8/16 Universal analog inputs. Programmable log time. Real time data storage of hardware and use interface event. A parallel port dot matrix printer (EPSONLX-300) interface. PC connectivity via RS-485 multi-drop facility or wireless. MODBUS RTU or Proprietary software protocol. PC interface with Sanyo SCADA compatible with any OS (US FDA 21 CFR Part 11 Compliance). Supply : 90 to 260 VAC @ 50 Hz.

Digital, Metal-Sealed Thermal Mass Flow Meters & Thermal Mass Flow ...

analog panel meters, electrical measuring instruments, DC Shunts

Analog Meters, indicative alarm meters, industrial machineries

Contact Resistance Meter, circuit breaker analyzer