Electronic Test Instruments Dealers in Lbs Marg, Mumbai

• Application: Industrial
• Warranty: 1 Year
• Weight: 860G,850G
• Model Name/Number: LCD DISPLAY BATTERY TESTER,DIGITAL CAR BATTERY TESTER ANALYZER 6V 12V
• Rated Voltage: 12 Volt
• Brand Name: VANNEL
• Power Supply: BATTERY VOLTAGE,6V 12V
• Rated Capacity: 2 - 200 Ah, 80AH
• Accuracy: 40Ah-200Ah
• Minimum Order Quantity: 5 Piece

  Sanitary Applications in food and diary industries Waste water & Pure water application Process industries

• Model: PHY 0059

SPECIFICATIONS: • Large LCD makes the reading clearly. • Metallic screen board with Stronger anti magnetic and anti-interferential function. • No power off under natural operation. • Full function protection • Anti-high voltage circuit design. • Restorable fuse protection circuit.

Digital Conductivity meter is precise and rugged instrument designed for most accurate measurement of conductance. Generally the measurement of conductance is not any harder than measuring resistance in fact conductance is the inverse of the resistance. However most ohmmeters operate from direct voltage and current if were used in a liquid it would invariably give raise some sort of electrolysis that would distort the measurement. To counter the electrolysis the meter must operate with on A.C. voltage or current of sufficient high frequency.A probe for measuring in liquid is made readily from a print header. Two header (preferably gold plated) from an excellent probe with fixed distance between the electrodes. The link between the electodes and connecting wires should be made waterproof. This probe is connecting wires should be made waterproof. This probe is called cell. This instrument is calibrated for cell constant one.Conductance S = Siemens = 1/2 international unit of conductance.The applications of conductivity meter in textile manufacturing water works department, laboratoriesa and educational institutions. 

• Accuracy: +/- 0.05pH
• Power Requirement: 230V AC +/- 10%, 50Hz
• Range: 0 to 14 pH

We are the leading supplier of this products.

• Type: Data Loggers
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Power Source: Battery, Electric
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

EMS is dedicated software packed for the monitoring and management of electrical, water, gas and thermal energy metering systems. Energy Management Systems are intelligent systems designed to monitor & control the energy consumption of homes (Home Energy Management System - HEMS), buildings/offices (Building Energy Management System - BEMS), or estates/campuses.

Our company is a well-known Manufacturer, Exporter and Supplier of Abrasion Tester. Abrasion Tester is used in application where elastomers are subjected to frequent rubbing or abrasive actions. As a part of its use, it is of prime importance to ensure that the formulation used has a full degree of resistance to abrasion. One of the methods for determining the abrasion resistance of elastomers is by a DIN type abrasion testing machine. In this test the elastomers under test is abraded against an abrading surface mounted over a rotating drum. The abrading surface has a specified abrading power. The test specimen which is in form of a button is held against it under a fixed load. The abrading surface is made to rub against the test specimen by rotating the drum at fixed speed, the test specimen being meanwhile made to move along the axis of the drum. The ratio of the volume loss in standard elastomers to the volume loss of the rubber under test, determined under the same conditions and the expressed as a percentage, gives the abrasion resistance index of the rubber under test. The determination of volume loss by this method is suitable for comparative testing and for checking the uniformity of specified products. However the results of this test give only limited information on the varying behavior of elastomers in practice.   Abrasion Tester is designed to determine the abrasion resistance index of natural and synthetic rubbers in accordance with the above principle. Abrasion Tester consists of the test specimen holder with a cylindrical opening adjustable between 15.3 and 16.3 mm to clamp the test specimen, with an arrangement to adjust the length of the test specimen protruding out. The holder is mounted on a swivable arm pivoted in a bracket which is moved laterally by a screw mechanism along the length of a rotating drum on which the abrasion cloth is fixed. The movement to the screw mechanism and drum is given by an electric motor coupled to a warm reduction gearbox with “V” belt and pulley to the specified speed of rotation to the drum and the specified lateral movement to the test specimen holder. The swivable arm and the test specimen holder are so disposed that the test specimen is pressed against the drum, the specified drum with its centre axis at an inclination of 3Deg to the perpendicular in the direction of rotation and placed above the longitudinal axis of the drum. The abrasive cloth is firmly fixed to the drum using a suitable, peel able adhesive with the ends of the abrasive cloth butt joined together. The equipment is provided with limit switches which, in addition of giving over travel safety to the movement of the test specimen holder, also stop the motor automatically after the specified run of the test specimen. An arrangement is also provided to protect the abrasive cloth from damage by the test specimen holder, by preventing lower edge of the test specimen holder to touch the abrasive cloth. The Abrasion Tester is built on the rigid steel base and finished in hammer tone painting and bright chrome/zinc plating to give it a corrosion resistant finish. Four abrasive cloths in addition to the fixed one on the cylinder are supplied with the equipment as the standard accessory. Moulding die and rotating type cutting die ( Hollow drill) for preparing the test specimens and extra abrasive cloths are available as optional accessories. Technical Specifications Diameter of the test specimen - 16 ± 0.2mm Height of the test specimen - 6 to 10 mm Diameter of rotating drum - 150mm Length of rotating drum - 470 mm Speed of the rotating drum - 40 rpm Lateral movement of test specimen holder - 4.2 mm per rotation of drum Related standards IS 3400 – (Part 3) – 1987 : Method of test for vulcanized Rubber abrasion resistance using a rotating cylindrical drum device. IS 4649 – 1989 : Rubber-determination of abrasion resistance using a rotating cylindrical drum device. DIN 53516 : Testing of rubber and elastomers determination of abrasion resistance.

• Features: Store test data including date and time in onboard memory, Rotary switch controls make operation easy in any conditions no need to remove gloves,
• AC Current Range (mA): 0.1 to 10,000
• AC Current Accuracy: ±10%
• Memory: 200 test results with time-and-date stamp
• Power (VAC): 100 to 240
• Height (in): 7
• Width (in): 12
• Depth (in): 11

Earth Resistance Testers, digital lcr meters, digital indicators

Larsen & Toubro is India's leading manufacturer of electronic energy meters. Our metering solutions cover both industrial and domestic segments, in both single and three phase configurations. These are manufactured at L&T's manufacturing plant in Mysore. Our metering product range includes tariff meters as well as digital panel meters, all of which are designed and developed through in-house R&D.

Item Code: VA271 Being one of the leading manufacturers and suppliers, we are engaged in proffering Car Battery Testers that are widely used for testing the battery charging systems for automobiles. Manufactured in accordance with the set industry guidelines, these efficient testers help in the accurate determination of how much power in the automotive battery is left. This series is widely demanded for its rugged construction, longer functional life and consistent operation. Features: Reliable performance Tough in construction Easy to use Other Details: Range:8-20 V and 0 - 150 A Suitable tor Battery Testing Size: 110 X 280 X 60 mm

The idea behind pre-paid delivery of electricity is to shift the onus of paying the money for electricity in time from the provider to the user. In fact, in such a scheme, since the money for electrical energy used is collected in advance, there is going to be a positive cash flow for the electrical power provider. Also, the costs associated with the generation of the bills, delivery of the bills, and disconnection of the power supply in case the bills aren't paid on time is eliminated. Prepaid Energy Meters are based on the principle of microcontroller application. The Microcontroller will accept the number of units recharged by the concerned department person, counts the number of units consumed by the customer and as soon as the customer exceeds the recharged amount, it will disconnect the power supply to the customer until the next recharge. Whenever the number of units in microcontroller becomes zero, microcontroller sends a signal to “Contact Maker /Breaker circuit” which is nothing but the relay and this relay cuts off the power supply to the consumer until next recharge. Figure: Block diagram of on line pre paid energy meter      

• Color: Grey, Brown, Red, White, Black
• Application: Indsustrial Usage
• Voltage: 0-110 V, 110-220 V, 220-440 V
• Feature: Accuracy, Light Weight, Durable
• Warranty: 1 yr, 2 yr
• Material: Aluminum, Stainless Steel, Copper
• Packaging Type: Box, Carton

Flow Range : DFM-01 : 1 ml/min. to 50 ml/min. with least count of 0.1 ml/minDFM-02 : 5 ml/min. to 500 ml/min. with least count of 1 ml/minDFM-03 : 200 ml/min. to 2000 ml/min. with least count of 1 ml/minDFM-04 : 1 ml/min. to 500 ml/min. with least count of 0.1 ml/min (auto range)DFM-05 : 1 ml/min. to 1000 ml/min. with least count of 0.1 ml/min (auto range)DFM-06 : 10 ml/min. to 400 ml/min. with least count of 1 ml/min. (auto range)DFM-07 : 0.5 mL/min to 750 mL/min, auto-rangingDFM-08 : Flow for gases across a range of 5-500 mL/min

Temperature Recorder, bearing resistance temperature detector

energy monitoring systems, Ac Drives, Mitsubishi Ac Drive, cements ac drive

electronic flow meter, barrel dispenser, Pressure Tank, Vane Type Air Motors

Digital Meters, Process Control Instruments, Electronic Ballast, Solar Light

pressure recorders, Temperature Gauges, Thermowells, Dial Thermometers

Technical Specifications : * Flow Range : DFM-01 : 1 mlmin. to 50 mlmin. with least count of 0.1 mlmin DFM-02 : 5 mlmin. to 500 mlmin. with least count of 1 mlmin DFM-03 : 200 mlmin. to 2000 mlmin. with least count of 1 mlmin DFM-04 : 1 mlmin. to 500 mlmin. with least count of 0.1 mlmin (auto range) DFM-05 : 1 mlmin. to 1000 mlmin. with least count of 0.1 mlmin (auto range) DFM-06 : 10 mlmin. to 400 mlmin. with least count of 1 mlmin (auto range) * Accuracy : ±2% of Reading, ±1 Digit * Power Supply : 230 V AC, 50 Hz, 10W * Resolution : 0.1 mlmin. & 1 mlmin * Dimensions : DFM- 01 : 27 cm (H) x 13 cm (W) x 10 cm (D) DFM- 02 : 27 cm (H) x 13 cm (W) x 10 cm (D)

capacitance meter, power regulator, Voltage Stabilizer

We are offering Benchtop Conductivity Meter

laser power meter, integrating sphere, Photometer, radio meter

Home Energy Monitoring system, OHM Assistant electricity monitor

Seal for Electricity Meter, bolt seals, Plastic Strip Seals

ELNet-PQ Power Meters, Loop Based Vehicle Detectors

Energy Meters, scada, dt monitoring system, Data Loggers

Electronic Flow Meter Turbine Type, Piston Type Air Motors