ELEKTROMAG Prabhadevi, Mumbai, Maharashtra

Suspension Magnets are used when only small contamination levels are encountered. The material accumulated on the pole face must be removed at regular intervals. When stopping the plant and in case of power failure, the iron drops back into the material to be conveyed.Overband Magnetic Separators are used when substantial quantities of magnetic material and or long bulky pieces are contained in the conveyor burden. This material is attracted by the magnet and is transported out of the magnetic field and ejected by the discharge belt running around the magnet.

Magnetic Sheet Floaters have been designed for easy handling of stacked sheets in production jobs. It cuts costs on job where steel sheets are handled in production by eliminating the need to fumble with thin oily sheets.

The Widest Range under one Roof. Elektromag are the pioneers of the Indian crane control gear industry. With experience in this field for more than 5 decades we offer you the most comprehensive range of AC DC Brake, Clutch, Resistance Box, Master Controller , DC contactor, limit Switch etc, used by various crane machinery manufactures.Elektromag’s stringent quality checks and materials reduce your expensive production stoppages due to trouble free performance.

Electro Hydraulic Thrustor Brake is a heavy duty brake designed to withstand the severe duty conditions imposed by heavy duty machinery in various industries. Electro Hydraulic Thrustor transmits useful thrust through the lever onto the brake shoe thereby releasing the brake. When the power is switched OFF, the brake is smoothly applied because the hydraulic thrust acting against the spring pressure is gradually reduced. diameter

Diameter : 100 mm to 1000 mm

The Anodising Process is an electrolytic process which results in the surface of the Aluminium Strip being converted to a layer of Aluminium Oxide which firmly adheres to the metal surface and forms a nearly homogeneous bond with the Aluminium. This oxide layer functions as an electrical insulator with insulating properties dependent on the oxide layer thickness. The oxide layer thickness is controlled during the Anodising process so as to meet the desired insulation level which would be adequate for the inter-turn voltage. For example, if the Inter-turn Voltage is 1V, then the insulating level would be in excess of 100V.