Elemental Analyzer Dealers in Deonar, Mumbai

1MHz to 300MHz Measurement Frequency at High Speeds with Superior Repeatability.

• Condition: New
• Automation Grade: Automatic
• Country of Origin: India
• Brand: BHOOMI
• Warranty: 12

The Agasthya 2013 series BI-8000 Paramagnetic Oxygen Analyzer is designed for Oxygen measurement in various application with low drift, precision and stable oxygen readings and long life paramagnetic sensor makes the analyzer worth the investments for long term use. Features ¡ 32-Bit Contex-M3 ARM Processor ¡ 5.7" QVGA TFT Touch Screen Display ¡ Relays for high & low alarms ¡ Long life Paramagnetic sensor ¡ RS485, supports MODBUS protocol & Ethernet as option ¡ Isolated 4 - 20 mA outputs for each gas ¡ PTFE tubing and corrosion-resistant components for internal sample health ¡ Industrial enclosure for Panel mount, Rack mount and wall mounting ¡ Flow meter for flow regulation

• Automatic Grade: Automatic
• Brand Name: Systea
• Measurement Mode: Continuous
• Resolution: -0 to 10 ppm-0.001 ppm, -10 to 100 ppm - 0.01 ppm, -100 to 1000 ppm - 0.1 ppm
• Accuracy: better than 5%; SD% of 7 replicates at 20% of the full scale
• Material: MS
• Range: - 0.050 to 1000 ppm NH3
• Measurement Principle: Gas-Sensing Ammonia Probe
• Protection Type: IP55
• Output Signal: 4-20mA
• Sample Temperature: 10deg C - 30deg C
• Colorimeter: Dual beam, Silicon detector
• Measuring Interval: Programmable

• Features: 5.7" QVGA TFT Touch Screen Display Unit measurement in ppm and mg/m3 18 user selectable fuels & 2 programmable fuels Long life electrochemical sensors

The The BI 2013 Series Bhoomi 210PV Flue Gas Analyzer measures oxygen, carbon monoxide, flue gas and ambient temperature in addition to pressure and velocity. The temperature sensor is integrated into flue gas sample probe. Diaphragm pump with high suction capacity is used for extraction of flue gas. Long life electrochemical sensors with low zero and span drift are used for stable readings.

• Power: Li-Ion battery
• The measuring range of the coercive force, А/сm (А/m): 1 - 40,0 (100-4000)
• Measurement cycle, seconds, not more: 5
• Magnetize: pulse
• Additional scale for calibration: 7
• Battery life, h, not less: 8
• Dimensions of the electronic unit, mm: 270 x 230 x 70
• Dimensions of the probe, mm: 200 x 170 x 70

A pH Meter is an electronic device used for measuring the pH (acidity or alkalinity) of a liquid (though special probes are sometimes used to measure the pH of semi-solid substances). A typical pH Meter consists of a special measuring probe connected to an electronic meter that measures and displays the pH reading. Being competent pH Meter Suppliers, we can efficiently handle bulk orders and make timely delivery.

The Sievers M9 Portable Total Organic Carbon (TOC) Analyzer is the most versatile of the M9 TOC Analyzer Series, offering maximum flexibility for how and where it is used. Weighing just 9.4 kg (20.8 lb), it’s lightweight, compact design makes it a powerful troubleshooting analysis tool that can be installed online for continuous measurement or carried to any location in the water system. The M9 Portable is engineered for ease of use and cost-effective operation, allowing it to be used for single grab samples, with an optional autosampler, or in a process stream for continuous on-line TOC measurement. An unequalled level of efficiency and flexibility Operating Range – 0.03 ppb to 50 ppm Patented Membrane Conductometric Detection technology Meets Pharmacopeia requirements of USP, EP, IP and JP Fast, Smart and Versatile to Optimize Sample Processing time Touch Screen interface simplifies operation and data review Measures discrete grab samples, automated analysis with Auto sampler or online Optional Turbo Mode enables 4 sec measurement Optional 1st Stage Conductivity as per USP and EP for grab or auto sampler mode Designed for on-line cleaning validation applications Full compliance support for 21 CFR Part 11

• C18 250 X 4.6 X 5um: C8 150 X 4.6 X 5
• TRB Petro.15 0.25 150 100 Temp -60 to 300/320: Ask for price
• Color: Ask for Price

We are pleased to introduce ourselves as an authorized distributor to provide sales and after-sales services for the Teknokroma range of products in India.   Teknokroma products are manufactured through state of art technology and are proven products at an economical price rate.    We do keep stocks of products for prompt supply to avoid time delays.   We also supply GC/ HPLC consumables to fulfill your requirement at one point.   We will be pleased to receive your inquiries to enable you to serve better.  

• Material: Aluminum, Stainless Steel
• Color: Black

Interactive digital kiosk with a high-resolution touchscreen display. Designed for retail environments, it provides customers with engaging product information, promotional content, and self-service options. Features intuitive software, sturdy design, and various connectivity options for seamless integration and ease of use.

We are offering fixed gas monitors nationwide. The efficiency of the fixed gas monitors consist clarity in digital displays that transparently depicts the necessary information as per your requirement. We are offering these fixed gas monitors in different shapes, sizes and colors. We want you to select the best place to invest. features available as common card designdurablelong time usesensitiveeasy maintenance uses detectorprovides protectiondepict able fixed single / multi gas monitoring the fixed monitoring system consists of two parts : monitoring model gazalarmsensing model gazsens model gazalarm the monitoring unit consists of power supply card : size - 220 mm x 100 mm supplies power (9 v dc to 24 v dc) to complete system including gas detector assembly (field unit) with a current carrying capacity of one card is maximum up to 5 amp. This can cater up to 10 cards in one rack. Multiple numbers of cards in multiple numbers of racks in one panel can be provided if the numbers of channels are more than ten.control card : control card provides fixed voltage & current required to the field unit. It also accepts 4-20 ma signal from field unit. This signal is then processed by control card using instrumentation amplifier. The processed signal corresponding to the gas concentration available in the field is displayed by two or three digit 7 segments led on control card display section. Two level alarms (latching/non latching type) are generated if the gas concentration is above preset limit. Fault alarm also is provided on the control card in case of sensor open/ short, cable from sensor is open/ short & under range/ over range conditions appear. The control card also delivers 4-20 ma.(repeater) output signal for plc / dcs.facility card : this card receives the alarm condition signal from control card. Depending upon the alarm conditions it activates the relays mounted on it & hoots the buzzer or siren or sends control signal to the pre-desired device. It also consists of alarm accep, reset & lamp test conditions. The push buttons are provided on the fascia plate to achieve the desired job.mother board : this board is provided on the back of 19” rack. The mother board pcb is provided with the copper tracks & euro connectors to hold all the cards like control card, power supply card & facility card. With the help of proper design reduces the back panel wiring of all cards..

High Pressure Solvent Delivery Pump Multi Wavelength UV-Detector Sample Inject Valve - (Rheodyne 7725 I) Lc Column (Usa) - {C18 (4.6 X 250) mm} Workstation Software. Wavelength range: 190˜700nm, Wavelength accuracy ± 1 nm Spectral bandwidth-8nm, flow cell volume 8µL, optical length-10nm.

• Voltage: 12 V DC
• Weight: 33 kg
• Application: Industrial Use
• Dimension: 800x450x300 mm
• Measuring Time: 30- 35 minutes
• Output Signal: 4-20 mA
• Protection Class: IP55
• Repeatability: better than 2%
• Sample Temperature: 10 DegreeC - 30 DegreeC

• Type: Digital
• pH Range: 0 to 14 pH
• Type of PH Meter: Portable
• Light Type: LCD Digital pH meter

• Type: Digital Ph Meters
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Application: Indsustrial Usage
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year, 2Years

• Type: Digital
• pH Range: 0 to 14 pH
• Type of PH Meter: Portable
• Light Type: LCD Digital pH meter

FFT-based spectrum analyzer with 36 MHz bandwidth Efficient vector signal analyzer for all-purpose demodulation and analysis of digital signals, Measurement applications for cellular standards, wireless connectivity standards and general purpose, e.g. phase noise, noise figure, etc.

• Brand Name: Ohaus
• Automatic Grade: Automatic
• Display Type: Digital
• Color: White
• Accuracy: 1mg
• Output Type: RS232, USB Host, USB Device
• Model Name/Number: MB90
• Readability: 0.01%/0.001 g
• Power: 240 V AC
• Pan Size: 90mm
• Temperature Range: Upto 200 Degree C
• Heating Technology: Halogen
• Communication: USB Host,USB Device and RS232
• Frequency: 50/60 Hz
• Capacity: 90g
• Net Weight: 11.5 lb/5.23 kg
• Dimensions: 210 x 180 x 350mm
• Repeatability (Std Dev) (g): 0.18% (3 g sample) 0.02% (10 g sample)
• Moisture Range: 0.01% to 100% (0.01% to 1000% for regain mode
• Display Results: %moisture, %solids, %regain, time, temperature, weight, method name, drying curve and statistics

• Model: ADS
• Application: Industrial Use, Laboratory Use
• Brand Name: ADS

• Brand Name: Hanna
• Material: Plastic
• Packaging Type: Box
• Model Name/Number: HI98107
• Usage/Application: Laboratory
• Type Of Ph Meter: Portable
• Temperature Electrode: 0-120 Degree C

Blood gas analyzer utilizes the latest optical technology. This technology does not use electrodes or contact points, eliminating the need for costly electrodes maintenance. analyzer has a measuring chamber heated to 370 Celsius. This allows for a wide operating temperature range to meet the needs of colder environments such as the operating room. Reduce pre-analytical errors with automatic sample aspiration, bubble and clot detection and step-by-step picture instruction on the colour touch screen.