Elevator Belt Dealers in Mumbai

We are offering elevator belts construction of elevator belts the construction of elevator belts includes two main elements, viz., rubber belt & elevator bucket. application of elevator belts elevator belt is typically used for vertical transportation of loose powdery material usually around 50 mm dia. standard specifications carcass: ep or cotton duck tensile strength: 100~2,400 nmm max. Belt width: ~1500 mm or 60” cover rubber: resistant to wear, oil, heat and anti-static; also cover-less type (fs)

Construction of Elevator Belts The construction of Elevator Belts includes two main elements, viz., rubber belt & elevator bucket. Application of Elevator Belts Elevator Belt is typically used for Vertical transportation of loose powdery material usually around 50 mm dia.

The C-FLEX Elevator Belts are constructed with specially designed straight warp "open type" steel cords with built-in elasticity, E-cords, in the warp direction onto which rigidity improving weft cords are tied using a special weaving techniques. This special structure means that neither the warp nor the weft cables are deformed in any way, but they lay perfectly straight all over the belt length, resulting in maximum strength performance and high resistance to damage. The open steel E-cords allow maximum rubber penetration, minimizingcorrosion penetration in case of belt damage and resulting in very high rubber to steel adhesion. The rubber penetration deep into the warp cables functions as lubricant for the twined steel wires forming the cords increasing the elasticity of the E-cords.Low ElongationC-FLEX elevator belts display only 0.3% permanent elongation at maximum recommended working load (safety factor 10), ensuring consultant belt tension, even at long centre distances. As a unique feature the steel carcass displays an elastic elongation of 0.15%, increasing shock resistance and allowing the belts to run over slightly crowned pulleys,thus further greatly improving the straight tracking ability of this belt quality, The elastic elongation is the variation in belt length when subjected to a load variation between 20% and 100% of the maximum recommended load at 10-fold safety factor.Standard Belt construction Strength/construction Belt thickness SW 630 3+3 mm 11 mm SW 800 3+3 mm 12 mm SW 1000 3+3 mm 12 mm SW 1250 4+4 mm 15 mm SW 1400 4+4 mm 15 mm SW 1600 4+4 mm 15 mm SW 1800 4+4 mm 15 mm SW 2000 4+4 mm 15 mm Recommended minimum covers. Other combinations to order. Belt Carcass Construction Type Warp cords diam. Pitch SW 630 2.00 mm 4.63 mm SW 800 2.85 mm 6.67 mm SW 1000 2.85 mm 5.38 mm SW 1250 3.90 mm 7.04 mm SW 1400 3.90 mm 6.25 mm SW 1600 3.90 mm 5.00 mm SW 1800 3.90 mm 5.50 mm SW 2000 3.90 mm 4.65 mm Weft Cords Standard Diameter : 1.29 mm Pitch : 6.67 mm Qualities C-FLEX belts areavailable in four different qualities : TypeT60, a high abrasion resistantqualityon SBRbasis TypeT100, a heat resistantqualityon modifiedSBRbasis TypeT130, a high-heat resistance qualityon EPDM basis Type CR, an all resistantqualityon Neoprenebasis

Advantages : Construction : Rubber belt & elevator bucket.         Application : Vertical transportation of loose powdery material usually around 50 mm dia.         Standard Specifications :Carcass : EP or Cotton DuckTensile Strength : 100~2,400 N/mmMax. Belt Width : ~1500 mm or 60”Cover Rubber : Resistant to wear, oil, heat and anti-static; also cover-less type

Adjustable Wrench, Ball Bearings, DOUBLE OPEN ENDED SPANNER, Hammer

Elevator Belt, Cleated Conveyor Belt, Pipe Conveyor Belt, steel cord belt